Service Bulletin

Mazda North American Operations
Irvine, CA 92618-2922

© 2016 Mazda Motor of America, Inc.

Subject:

Bulletin No:

09-016/16

Last Issued:

06/22/2016

WRINKLES ON LEATHER SEAT SURFACE OF NEW VEHICLE

MULTI-MODEL - WRINKLES ON LEATHER SEAT SURFACE OF NEW VEHICLE

BULLETIN NOTE
• This bulletin supersedes the previously issued bulletin(s) listed below: The changes are noted in Red beside
the change bars.
• This service bulletin is only for sublet repair. A qualified upholstery repair specialist is required for this repair
procedure.
• Please print a copy of this bulletin for the upholstery repair specialist.

Previously issued TSBs:

Date issued:

09-016/16

03/07/2016

09-015/12

03/23/2012

APPLICABLE MODEL(S)/VINS

2015-2017 Mazda3

2015-2017 Mazda6

2015-2016 Mazda CX-5

2015-2016 Mazda5

2016 Mazda CX-3

2015-2016 Mazda CX-9

2015-2016 Mazda MX-5

Page 1 of 9
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.

Bulletin No: 09-016/16

Last Issued: 06/22/2016

© 2016 Mazda Motor of America, Inc.

DESCRIPTION
At PDI or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat
cushion and/or seat back surface.
Customers having this concern should have their vehicle repaired by a qualified upholstery repair specialist
using the following repair procedure.

Wrinkles on seat cushion

Wrinkles on seat back

NOTE:
•
•
•

A qualified upholstery repair specialist is required for this repair procedure.
Explain to the customer before performing the repair that the wrinkles may not be completely
removed.
Explain to the customer that the leather may develop some wrinkles due to aging or wear during
normal use. This is normal behavior of the leather material.

Page 2 of 9

Bulletin No: 09-016/16

Last Issued: 06/22/2016

© 2016 Mazda Motor of America, Inc.

EQUIPMENT INFORMATION

1

Steamer - Commercial type

2

Lint-free cloths

3

Spray bottle (with water)

4

(Optional) Heat gun with variable heat control

Page 3 of 9

Bulletin No: 09-016/16

Last Issued: 06/22/2016

© 2016 Mazda Motor of America, Inc.

REPAIR PROCEDURE
There are two (2) repair methods available for this repair:

COMMERCIAL STEAMER METHOD

This is the preferred method. This method should resolve most
customer concerns.

HEAT GUN METHOD

This is NOT the preferred method. Only use this method if the
COMMERCIAL STEAMER METHOD is not sufficient.

COMMERCIAL STEAMER METHOD
Note:
•
•
•

A qualified upholstery repair specialist is required for this repair procedure.
Always follow the manufactures instructions for the steamer and heat gun.
Do not apply the steamer head directly to the perforated sections of the leather seat surface (A).

B - Non-perforated leather seat surface

A - Perforated leather seat surface

Page 4 of 9

Bulletin No: 09-016/16

Last Issued: 06/22/2016

© 2016 Mazda Motor of America, Inc.

1. Use a clean lint-free cloth to cover all seat belt buckles.

CAUTION:
• Do not spray water on the seat belt buckles.
• Do not apply the steamer head directly on the latch anchor location buttons.

Page 5 of 9

Bulletin No: 09-016/16

Last Issued: 06/22/2016

© 2016 Mazda Motor of America, Inc.

2. Choose one area at a time to work on. Apply the steamer head directly on the wrinkle until the upholstery
material becomes warm. Move the steamer head in a outward motion (similar to ironing a shirt). Repeat until
the wrinkles are removed to an acceptable level.
CAUTION:Do not apply steam directly on the perforated sections of the leather seat surface.

If necessary, use your hand to work out the wrinkles by applying firm pressure in a outward motion. This
step can be repeated as long as the upholstery material is warm. If the upholstery material feels cool, reapply steam.

3. Repeat step #2 until the wrinkles are removed to an acceptable level.
NOTE: Direct heat may be necessary to aid in the removal of some wrinkles. Refer to HEAT GUN
METHOD.

Page 6 of 9

Bulletin No: 09-016/16

Last Issued: 06/22/2016

© 2016 Mazda Motor of America, Inc.

Before

After

CAUTION:
• Do NOT keep the steamer head at the same place for a long time.
• Do NOT run the steamer head without a water-soaked cloth especially over seat trim beading
and seat side trim area.
• Seat damage may occur if the caution points above are nor followed as shown below.

Damaged seat side trim

Damaged seat trim beading

Page 7 of 9

Bulletin No: 09-016/16

Last Issued: 06/22/2016

© 2016 Mazda Motor of America, Inc.

HEAT GUN METHOD (optional)
1. Use a water spray bottle to pre-soak a lint-free cloth.
2. Use a heat gun with variable heat control. Set the heat range to the lowest setting.
CAUTION:
• Do not apply direct heat on the perforated sections of the leather seat surface.
• Do not apply direct heat on the upholsteries’ stitching or beading.
• Do not apply direct heat on the latch anchor location buttons.
Hold the heat gun at least 5 inches away from the upholstery material. Apply heat in a circular motion.

Once the upholstery material reaches a warm temperature, use the pre-soaked cloth to apply firm hand
pressure in a outward motion.

Page 8 of 9

Bulletin No: 09-016/16

Last Issued: 06/22/2016

© 2016 Mazda Motor of America, Inc.

WARRANTY INFORMATION
NOTE:
•
•
•
•

This warranty information applies only to verified customer complaints on vehicles eligible for warranty repair.
This repair will be covered under Mazda’s New Vehicle Limited Warranty term.
Additional diagnostic time cannot be claimed for this repair.
This service bulletin is only for sublet repair. A qualified upholstery repair specialist is required for
this repair procedure.

Note
Warranty Type

A

---

Symptom Code

87

---

Damage Code

9E

---

Refer to EPC part number of
concerned seat

---

0

---

Operation Number / Labor Hours:

XXG23ARX / 0.0 Hrs.

---

Sublet Allowance:

MM030XRX / 0.3 Hrs.

Sublet allowance can be claimed
for administration tasks associated
with the sublet repair

Part Number Main Cause
Quantity

UPHOLSTERY REPAIR SHOP
Cost to repair leather seats

Sublet Invoice Number

Number from the upholstery repair shop invoice or dealer purchase order.

Sublet Type Code

Enter “F6”

Sublet Amount

Enter the upholster shop invoice amount. No mark-up allowed.

Page 9 of 9