Service Information
Special Tools & Equipment

Number: ATE-16-20

Subject: John Bean Pro32 Vehicle Database Update (June 2016)

Date: July 13, 2016

Supersedes ATE-16-12 dated May 13, 2016 due to Pro32 Program software and Pro32 Vehicle Data software
updates.

This communication provides important information on how to obtain and install the latest software for the
John Bean VAG1943B, VAS6331, VAS6421 alignment tools.

Latest Software Versions Released:
•

John Bean Pro32 Vehicle Database Update (Version 06.2016).exe

Installation Requirements:
• All John Bean VAG1943B, VAS6331, VAS6421 Aligners must be previously updated to Pro32 Program

software version 3.4 or higher before performing this update
• Attain a copy of Pro32 Aligner software and Vehicle Specification updates installation instructions (see

attachments)
•

Dealers must download the John Bean Pro32 Vehicle Database Update (Version 06.2016).exe file
from ServiceNet> Wheel Alignment Software >John Bean

Installation:
To update the John Bean VAG1943B, VAS6331, VAS6421 Aligners, please read and follow the Pro32
Aligner software and Vehicle Specification updates installation instructions attached.
Questions regarding installation of software updates to VAG1943B, VAS6331 or VAS6421 (after they have
been downloaded), can call EquiServ technical support desk (service group for John Bean) at 800-2255786. EquiServ will also be able to help with Aligner software and specifications installed from CD.

Page 1 of 1 with attachments
© 2016 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be
reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified
or reposted to other sites, without the prior expressed written permission of the publisher.

Vehicle Data Base für Software Pro32 (for wheel aligner models VAS6331, VAS 6421
and VAG 1943):

Pro32 DB VAG-062016*, June 2016
Supplements/Changes compared to Version VAG - 042016

Fahrzeugdatenbank für Pro32 Software (für Achsmessgerätmodelle VAS 6331, VAS 6421
und VAG 1943)

Pro32 DB VAG–062016*, Juni 2016
Ergänzungen/Änderungen zur Version VAG - 042016
Volkswagen

1
2
2

VW Sharan [7N]
GOLF VARIANT [BX5]
EOS [1F/1F7/1F8]
Golf 2015 [AU1]
Golf Variant 2015 [BX5]

2
2

Audi

SQ7
R8 [4S]
A3 [PA]
A3 [8V]
A3 Lim [PA]
A3 SQB [PA]
A3 Cabrio [PB]

1
2
2
2
2
2
2

Skoda

SKODA OCTAVIA III, DCC Fahrwerk/suspension
SUPERB III, Nivomat G01+1JI Fahrwerk/suspension

1
1

Seat

Änderung aller Modellcodes (3-stellig auf 2stellig)/change all model codes to 2-digit

2

Bentley

-

-

Lamborghini

-

-

Porsche

Carrera (991)
991 GT3 RS

1
2

Mexico/Mexiko
Mexico/Mexiko

1 = Neu / New
2 = Änderung / Change
*= die ersten beiden Ziffern bezeichnen den Monat, die letzten 4 Ziffern
die Jahreszahl

Snap-on Equipment GmbH – Konrad-Zuse-Str. 1, 84579 Unterneukirchen, Germany, Tel. 08634-6220
Geschäftsführer: Klaus Kirstätter
Sitz der Gesellschaft: Unterneukirchen, Eingetragen beim Handelsregister Traunstein HRB 20757
AGB in ihrer gültigen Fassung entnehmen Sie bitte unserer Homepage: www.snapon-equipment.de
Seite 1 von 1/ Page 1 of 1

Software Installation Instructions
Pro32 VAG (Portal Install)
This document outlines the installation process for Pro32 Software, specifically the VAG release
portal version to be downloaded in the field as a self-extracting ZIP file.
After downloading the self-extracting ZIP file from the portal, and copying to the aligner, doubleclick the self-extracting EXE file. See example below.

This will open the file to begin the extraction process. Press the “Setup” button and the dialog
will show the unzip progress.

After the ZIP extracts, it will automatically start the Pro32 installer. Select the setup language in
the first screen of the installer process and press Next to continue.

Select which languages (one or many) you would like installed for the software and then press
Next to continue.

The installer shows the progress of the installation

When the installer completes, it will request to restart the computer. Select “Finish”.

After the PC restarts, it will request to perform the install of video CODEC’s. Select “Next” to
continue. Once it is finished, it will finish booting into Windows.
The user can confirm the version of the software by using the “About” button on the toolbar of
Pro32.