Classification:

Reference:

EL16-021

Date:

NTB16-063

June 23, 2016

WORN IGNITION KEY WILL NOT TURN THE IGNITION SWITCH
APPLIED
VEHICLES:

APPLIED
VIN & DATE:

2007 – 2012 Versa Hatchback (C11)
2007 – 2011 Versa Sedan (C11)
2012 – 2016 Versa Sedan (N17)
2014 – 2016 Versa NOTE (E12)
2013 – 2016 Sentra (B17)
2013 – 2015 NV200 (M20)
2014 – 2016 Taxi

Without
Intelligent Key

2007 – 2015 Versa Hatchback & NOTE: All
2007 – 2015 Versa Sedan: All
2013 – 2014 Sentra: All
2013 – 2014 NV200: All
2014 – 2015 Taxi: All
2016 Versa NOTE: Built before 3N1CE2CP(*)GL 373078 // Nov. 27, 2015
2016 Versa Sedan: Built before 3N1CN7AP(*)GK 409337 // Nov. 27, 2015
Built before 3N1CN7AP(*)GL 847923 // Nov. 27, 2015
2015 Sentra: If the 11th digit of the VIN is L - All
If the 11th digit of the VIN is Y:
Built before 3N1AB7AP(*)FY 379444 // Nov. 27, 2015
2016 Sentra: If the 11th digit of the VIN is Y - None / Does not apply
If the 11th digit of the VIN is L:
Built before 3N1AB7AP(*)GL 633695 // Nov. 27, 2015
2015 NV200: Built before 3N6CM0KN(*)FK 734443 // Nov. 27, 2015
2016 Taxi: Built before 3N8CM0JT(*)GK 692875 // Feb. 3, 2016

IF YOU CONFIRM
A worn mechanical ignition key will not turn the ignition, feels rough while turning, or sticks
while turning.
And
The customer confirms the mechanical ignition key had previously worked properly.
ACTION
Replace all of the vehicle mechanical key cylinders (ignition and locks) with a new lock set.



Refer to the Electronic Service Manual (ESM) for replacement information.
Some vehicles may be equipped with NATS, which will require registration of the
new keys.

Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/2

PARTS INFORMATION
DESCRIPTION

PART NUMBER

QUANTITY

KEY SET CYL LCK

Use the VIN and the electronic parts catalog
to obtain the correct part number for your
vehicle

1

CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the following claims coding:
OPERATION
PFP
OP CODE
SYM
DIAG
FRT
RPL STEERING LOCK ASS'Y
QA14AA
(1)
ZE
32
(2)
RPL COMPLETE LOCK SET
QA141A
(1) Refer to the electronic parts catalog (FAST) and use the Lock set part number as the
Primary Failed Part (PFP).
(2) Reference the current Warranty Flat Rate Manual and use the indicated flat rate time.

2/2

NTB16-063