ISX CM2250 Diesel Exhaust Fluid Dosing Unit and DPF Delta-P Sensor Tube Orientatio... Page 1 of 4

TRP Number
T1575

Revision Level

Date
11-NOV-2014

Expiration Date (U.S. and Canada)
31-DEC-2015
Engine Family

Fuel System

Group Number

Expiration Date (International)
31-DEC-2015
Plant

Build Date
From

To

ISX, QSX15ISX15

Temporary Repair Practice
ISX CM2250 Diesel Exhaust Fluid Dosing Unit and
DPF Delta-P Sensor Tube Orientation TRP
Attention

U.S / Canadian Distr./Branches and Div. Offices
U.S / Canadian Dealers

If additional information is required, contact your Cummins Warranty Operations Group
Leader.

Description
This TRP is being issued to direct the repair action for the following symptoms associated with
the Aftertreatment Diesel Exhaust Fluid Dosing Unit (aka the DEF pump) on ISX CM2250
engines with:

Fault Code 1681
Fault Code 2976
Fault Code 4167
Leaking diesel exhaust fluid from the Aftertreatment Diesel Exhaust Fluid Dosing Unit
electrical connector

https://qsol2.cummins.com/qs3/pubsys2/xml/en/trp/2015/t1575.html

12/1/2014

ISX CM2250 Diesel Exhaust Fluid Dosing Unit and DPF Delta-P Sensor Tube Orientatio... Page 2 of 4

The Aftertreatment Diesel Exhaust Fluid Controller software phase 3.7.8.3 contains updates
which will reduce the occurrences of the symptoms listed above. In addition to the normal
troubleshooting for the symptoms, the Aftertreatment Diesel Exhaust Fluid Controller software
must be updated to 3.7.8.3 and the DPF delta-P sensor tubes must be checked to ensure
proper orientation. For repairs associated with leaking DEF at the electrical connector, the
OEM aftertreatment harness connected to the dosing unit may be damaged as a result of the
DEF leak and may need to be replaced in some cases.
This TRP will also cover the OEM harness replacement if needed.
NOTE: For engines still within coverage, a separate claim should be filed to Warranty for
reimbursement of the troubleshooting, the DEF dosing unit replacement (if directed by
troubleshooting procedures), and the OEM aftertreatment harness (if needed) and only
the Diesel Exhaust Fluid Controller software update and DPF delta-P tube reorientation
should be filed to this TRP. In all other cases, the entire repair work for the symptoms
listed can be filed to this TRP.
NOTE: This TRP can be applied more than once to any ESN as long as the eligibility
requirements are met.

Action
In order to qualify for repair under this field action, an engine:
1.
2.
3.
4.

will be covered Regardless of coverage status, and
must be within the 5 year/500,000 mile service window, and
must be on the attached ESN list, and
must meet the QuickServe® Online Fault Code Analyzer criteria for troubleshooting fault
code 1681, 2976, or 4167 and/or must have an external diesel exhaust fluid leak at the
diesel exhaust fluid dosing unit.

After verifying that the engine meets the above requirements, perform the following actions:
1. Follow the published troubleshooting for the fault codes and/or DEF leak covered by this
TRP.
2. Replace the aftertreatment diesel exhaust fluid dosing unit only if directed by the
published troubleshooting. Please refer to Procedure 011-058 in the ISX15 CM2250
Service Manual, Bulletin 4022250.
3. If diesel exhaust fluid was leaking from the aftertreatment diesel exhaust fluid dosing unit
electrical connector, inspect the associated OEM connector and harness. Replace the
OEM harness if needed. Please refer to the appropriate OEM Manual.
4. Update the aftertreatment diesel exhaust fluid controller software to phase 3.7.8.3 or
later. Please refer to Procedure 011-077 in the ISX15 CM2250 Service Manual, Bulletin
4022250.
5. Inspect the orientation of the aftertreatment differential pressure sensor and sensor tubes
to ensure they are installed in the correct orientation to achieve a continuous downward
slope away from the sensor ports in order to prevent moisture build up. Please refer to
TSB140105.

https://qsol2.cummins.com/qs3/pubsys2/xml/en/trp/2015/t1575.html

12/1/2014

ISX CM2250 Diesel Exhaust Fluid Dosing Unit and DPF Delta-P Sensor Tube Orientatio... Page 3 of 4

6. If needed, adjust the aftertreatment differential pressure sensor and sensor tubes to the
correct orientation. Please refer to TSB140105 along with the video TSB created to help
illustrate the adjustment procedure (http://tsb.cumminsvirtualcollege.com/140105.aspx).

Material Disposition
Materials removed as a result of this field action must be sent to ReCon.

Reimbursements
Parts
The following parts are covered under this field action:
Part Number

Quantity

Description

287187900RX

1

PMP,DSR (OPTIONAL)

NOTE: SRTs to gain access that are required to complete the repair, that are sufficiently
explained in the claim narrative, may also be claimed on this action.
NOTE: SRTs required for troubleshooting using EDS or QSOL trees can be claimed on
this field action.

Labor using applicable Access Code and Time:
SRT
Code
00-400
00-724
00-90X
11-039
11-084
19-042
99-901
99-902
99-902
99-902

Description

Time
(hrs)

Steam Clean - Single Component Repair
INSITE - Use During Troubleshooting
Administrative time
Aftertreatment Stationary Regeneration
Aftertreatment Diesel Exhaust Fluid Dosing Unit - Remove and Install
(With SCR)
Aftertreatment Diesel Exhaust Fluid Dosing Controller Calibration Transfer
DEF PUMP OEM HARNESS - REMOVE AND INSTALL, FREIGHTLINER
CHASSIS (OPTIONAL - QTY 1)
INSPECT DPF DELTA-P TUBE ORIENTATION (QTY 1)
ADJUST DPF DELTA-P TUBE ORIENTATION (OPTIONAL - QTY 1)
DEF PUMP OEM HARNESS - REMOVE AND INSTALL, ALL OTHER
OEM'S (OPTIONAL - QTY 3)

Travel

https://qsol2.cummins.com/qs3/pubsys2/xml/en/trp/2015/t1575.html

12/1/2014

ISX CM2250 Diesel Exhaust Fluid Dosing Unit and DPF Delta-P Sensor Tube Orientatio... Page 4 of 4

Travel is not covered under this field action. Towing is not covered under this field action.

Other Claimables
Consumables are covered under this field action.
NOTE: This TRP will cover replacement of an OEM harness that is damaged as the
result of a DEF leak at the DEF dosing unit electrical connector.

Claim Instructions
For Cummins Dealers, claims for this TRP must be filed via RAPIDSERVE™ Web
(rsw.cummins.com). For information regarding RAPIDSERVE™ Web, please reference the
"Warranty" tab in QuickServe® Online. If there are additional questions, please contact your
local Cummins Distributor.
Claim Codes
Description
Account Code:
Pay Code:
Pay Code:
Pay Code:
Failure Code:

Code
65
Distributor = X
Dealer = D
International = I
WUSDUK

Attachments
Click here to see t1575_esn-list.xls
Last Modified: 11-Nov-2014
Copyright © 2000-2010 Cummins Inc. All rights reserved.

https://qsol2.cummins.com/qs3/pubsys2/xml/en/trp/2015/t1575.html

12/1/2014