NHTSA ID Number: 10075946
Manufacturer Communication Number: T-SB-0315-08
TSB/Document Date: 2016-07-07
Summary
Toyota
customers who find it necessary to increase the length of their seat belts may obtain Seat Belt Extenders at no cost through their local Toyota dealer. The extender is available in 6-inch, 9-inch, 12-inch, 15-inch, and 18-inch lengths. The extender is available only in black. Owners are informed of the Seat Belt Extender availability through the Owner's Manual included in each vehicle
®TOYOTA
T-SB-0315-08
Rev2
Technical Service Bulletin
October 16, 2008
Toyota Seat Belt Extender
Service
Category
Vehicle Interior
Section
Market
USA
Toyota Supports A_
ASE Certifi cation ~
Applicability
YEAR(S)
MODEL(S)
2009
4Runner, Avalon,
Camry, Camry HV,
Corolla, FJ Cruiser,
Highlander, Highlander
HV, Land Cruiser,
Matrix, Prius, RAV4,
Sequoia, Sienna,
Tacoma, Tundra,
Venza , Yaris
ADDITIONAL INFORMATION
REVISION NOTICE
September 6, 2013 Rev2:
• Seat Belt Extender Application and Part Number Information sections have been updated.
June 24, 2009 Rev1:
• Applicability and Seat Belt Extender Application sections have been updated to include
2009 Venza.
Any previous printed versions of this service bulletin should be discarded.
Introduction
Toyota customers who find it necessary to increase the length of their seat belts may obtain Seat
Belt Extenders at no cost through their local Toyota dealer.
• The extender is available in 6-inch, 9-inch, 12-inch, 15-inch, and 18-inch lengths.
• The extender is available only in black.
• Owners are informed of the Seat Belt Extender availability through the Owner's Manual included
in each vehicle.
© 2013 Toyota Motor Sales, USA
Page 1 of 9
Rev2
T-SB-0315-08
Page 2 of 9
October 16, 2008
Introduction (Continued)
The customer (individual requiring the extender) must visit a Toyota dealership to have the required
measurements made and to complete the Seat Belt Extender Worksheet. The worksheet will allow
the proper fitting and selection of a Seat Belt Extender for the customer. The dealership personnel
should then determine the applicable part number and place an order through Dealer Daily.
The dealership service department should complete the affixed Seat Belt Extender Customer
Information Label on the part and review the "Owner Instructions" (page 8) with the customer. The
dealership should give a copy of the completed worksheet and Owner Instructions to the customer
and keep the originals in the customer's file. To assure utmost owner satisfaction, it is recommended
that a dealership designate one person to coordinate all activities related to the Seat Belt Extender
issue. It is recommended that dealerships do NOT stock Seat Belt Extenders due to the need for
proper fitting to individual customers.
This bulletin contains the follcming information:
• Procedure and Sample Label
• Application Charts
• Part Number Information
• Owner Instructions
• Seat Belt Extender Worksheet
Warranty Information
OP CODE
DESCRIPTION
TIME
OFP
T1
T2
NIA
Not Applicable to Warranty
-
-
-
-
Repair Procedure
1. Customer requests a Seat Belt Extender from dealer.
2. Dealer verifies the need for a Seat Belt Extender and obtains a current copy of this bulletin
and copies the worksheet.
3. Dealer measures the customer and completes the worksheet. Dealer determines the correct
part number and places an order for the part through Dealer Daily.
4. Dealer receives Seat Belt Extender and calls the customer to check the fit of the part.
5. If the Seat Belt Extender fit is good, dealership personnel completes the Customer Information
Label on the part, explains usage of the part, and gives the customer a copy of the completed
worksheet.
6. Dealer places copy of the completed worksheet in the customer's records .
© 2013 Toyota Motor Sales , USA
T-SB-0315-08
Rev2
Page 3 of 9
October 16, 2008
Repair Procedure (Continued)
Figure 1.
DEALER
PARTS
SUPPLY
OWNER
DEALER
SHIP SEAT
TEST FIT
COMPLETE
RECEIVE
MEASURE
PLACE
BELT
CUSTOMER
LABEL AND
COPY OF
CUSTOMER
ORDER
&
THROUGH i•~ EXTENDER I~ WITH PART ..._ ADVISE
•-.WORKSHEET
· II"" CUSTOMER .I
& USE OF
COMPLETE ... DEALER ii TO DEALER
EXTENDER
WORKSHEET
DAILY
'
FILE
WORKSHEET
IN
CUSTOMER
RECORDS
Figure 2. Sample Seat Belt Extender Customer Information Label
CAUTION
THIS SEAT BELT EXTENDER IS TO BE USED ONLY BY: _ _ _ _ _ _ _ _ _ __
ON VEHICLE: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __
VIN: -------------------------~
SEATING POSITION: _ _ __ _ _ __ _ _ _ _ _ _ _ _ _ _ _ _ __
USE BY OTHERS, OR IN ANOTHER SEATING POSITION, OR IN ANOTHER VEHICLE
COULD REDUCE SEAT BELT RESTRAINT IN AN ACCIDENT AND RESULT IN
PERSONAL INJURY.
© 2013 Toyota Motor Sales , USA
T-SB-0315-08
Rev2
Page 4 of 9
October 16, 2008
Front Seat Belt Extender Application
FRONT SEAT MODEL
EXTENDER APPLICATION
lYPE
2009
4Runner
K-6
Avalon
K-6
Camry
R-8
Camry HV
R-8
Corolla
R-8
FJ Cruiser
K-6
Highlander
R-8
All Models
Highlander HV
R-8
Land Cruiser
R-8
Matrix
R-8
Prius
R-8
RAV4
R-8
Sequoia
R-8
Sienna
R-8
Tacoma
Bench Type
R-7
Separate Type
R-8
Tundra
Venza
R-8
All Models
'raris
R-8
K-6
© 2013 Toytita Motor Sales , USA
T-SB-0315-08
Rev2
Page 5 of 9
October 16, 2008
Rear Seat Belt Extender Application
REAR SEAT- EXTENDER APPLICATION
MODEL
4Runner
lYPE
2009
Middle Row Seat
K-7
3rd Row Seat
R-8
T-1
Avalon
Camry
All Models
R-8
Camry HV
Corolla
Corolla
NUMMI Production
TMMC Production
Takaoka/Kanto Production
All Models
RAV4
K-7
2nd and 3rd Row Middle Seats
K-8
T-1
All Models
R-8
3rd Row Left and Right Side, 2nd Row Left
(2nd Row Right, 8 Passenger Models Only)
- Our car seat belt cushion protect and relieve shoulder...
- The surface is made of high-quality polyester, and the inner...
- Easy to install and easy to use, wrap the car seat belt pad...
- These seat belt covers are suitable for all car seat belts...
- Packaging: 2pcs car seat belt pad covers.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: T-SB-0315-08
Replacement Service Bulletin Number:
MFR Communication Date: 2008-10-16
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: SEAT BELTS
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 🎉[OTOFIX D1 Lite, Perfect Cost-effective Diagnostic Tool]: OTOFIX D1 Lite, a newest bidirectional scan tool from OTOFIX company, is a great choice for DIYers and repair shops. 👉This obd2 scanner diagnostic tool packs all practical functions: OE level all systems diagnoses, Bi-Directional Control, 38+ reset services fixing 99% of common problems, support DoIP & CANDF protocols and FCA
AutoAuth, high-end hardware configuration. Worldwide vehicles and 🔥2 Years Free Updating🔥 covered. - 🎉[Bi-Directional Scan Tool, Active Test]: OTOFIX D1 Lite bluetooth obd2 scanner can also command ECUs and monitor the operation of the actuators to track down the problems of certain parts, like windows, sunroof, wipers, fuel pumps, etc., saving repair time & trouble. This makes OTOFIX D1 Lite the most cost-effective bidirectional scan tool.
- 🎉[2026 Newest, 38+ Hot Reset Functions]: Equipped with 38+ reset functions in one, the OTOFIX D1 lite automotive scanner diagnostic tool allows you to troubleshoot 99% of common vehicle problems. You can use this car diagnostic scanner holding enough functions to easily repair common vehicle models in your repair shops. Including Oil Reset, Injector Coding, Throttle, DPF Reset, SCR Reset, Gear Learning, Clutch Learning, Suspension, etc. Note* Reset functions vary by model.
- 🎉[OE Level Full Systems Diagnostics]: Unlike the 2-system and 4-system diagnostic tools, the OTOFIX auto scan tool can complete comprehensive system diagnostics within 5 minutes. It accesses and scans all available onboard systems like for Engine /AT /ABS /EPB /BMS /TPMS /SRS /SAS /Audio System /BCM /Air Conditioning / etc., to read & clear codes, view live data, and check ECU information. Note: Active test is not involved.
- 🎉[Powerful Hardware Configuration]: Designed with a fashion appearance & a 7” touchscreen and a weight of 463g, this OTOFIX D1 Lite OBD2 diagnostic scanner scan tool is convenient for everywhere and easy to use & store. Android9.0 OS and 2+64GB memory enhance multi-task smoothness and diagnostic operation, no more wasting too much time. 5800mAh battery allows hours-lasting use. WiFi & VCI1 also bring faster communication for your diagnostics.
- 🏆【2026 TOP OBD2 Scanner Diagnostic Tool】OTOFIX D1 Lite wireless obd2 scanner has upgraded hardware configuration and car coverage. The newly upgraded D1 Lite with 🔥OS Android 9.0🔥1.5Ghz 4 core high efficiency processor🔥2GB RAM+64GB ROM large storage🔥5800mAh large battery, more stable and longer lasting diagnostics🔥 38+ Reset🔥action tests🔥full system diagnostic🔥Supports MV105 endoscope🔥21+ Language Supports🔥100000+ vehicle coverage to meet all your daily maintenance needs.
- 👍【Bi-Directional Control / Active Test】D1 Lite obd2 scanner has bidirectional control(worth $300+), which is the most beloved feature among mechanic. If your headlights or car windows are broken, going to a repair shop will cost a lot of money. You can use D1 Lite to send execution commands to the ECU module and identify the repair status. Such as ABS, car windows, doors, valves, wipers, headlights, etc., effectively shorten diagnostic time and reduce diagnostic costs.
- 🔥【All Systems Diagnostics, In-depth Checking】This advanced OBD2 Scanner D1 Lite can perform OE-level diagnosis of all systems including engine, transmission, airbag, ABS, ESP, TPMS, gateway, steering, radio, and air conditioning for more than 100 brands. This diagnostic scanner supports essential functions, such as reading ECU version info, reading and clearing fault codes, and reading data streams.With just a simple click, it provides you with accurate and in-depth diagnostics.
- 🏆【38+ Reset Hot Functions】For repair workshops, holding an OTOFIX D1 Lite Auto scanner is a strong advantage over others. Its 38+ maintenance functions provide various solutions for all module repairs, including Oil Reset, TPMS Reset, Injector Coding, Suspension, Throttle Matching, etc., which will usher your repair business to a new pinnacle. Continuously updating will never make the functionality & compatibility out-of-date.
- 🏆【150+ Models, 10000+ Car Coverage & 16 Languages】D1 Lite is a comprehensive car diagnostic scan tool, help you to troubleshoot car issues fast for 95% US, European, Asian auto makes. ✅ With frequent updates and optimizations allow D1 Lite to cover more vehicles to meet your needs. ✅ Multilingual menu allows auto mechanics around the world to use it without language barriers. 🚩Note: Kindly send us the S/N of the device to authorize new language updates before changing the menu language.
- 2026 Newest Wireless Bluetooth Scan Tool D1: OTOFIX D1 Diagnostic scanner is upgraded version with Enhanced Hardwares & Newest Functions, FASTER and SMARTER! ✅Alternative Bluetooth 5.0 +USB connect✅2G+64GB✅Android 9.0 OS✅5G & 2.4 GHz Dual WiFi✅5800mAh battery👍VAG Guided Function👍ECU Online Coding👍CANFD&DOIP👍40+ Services👍Bi-Directional Control👍Full Systems Diagnose👍2 Years Free Update👍150+ Vehicle Coverage🎁Contact to get gift: otofixaftersales-amz@ outlook.com
- ECU Coding to Unlock the Hidden Features: OTOFIX D1 obd2 scanner diagnostic tool newly adds ECU Coding which can Online Coding(ONLY for VW/Au.di/Sk0da), Variant Coding/Offline Programming, Flash Hidden Functions, Reset Adaptive Data, Match Replaced Components, Customize OE-Settings. Such as: halogen fog lamps retrofitted with xenon fog lamps, different capacity battery retrofit, disbale auto start-stop, sunroof initialization, injector calibration, etc. PS: Coding functions vary by model&year.
- Full Bidirectional Control for Active Car Tests: The D1 OTOFIX scanner also offers bi-directional control, allowing you to perform powerful active tests on car subsystems. This means that you can check the working status and functionality of open & close solenoids, energize injectors, turn cooling fan on & off, and more, all from the device itself.🚩The D1 bi-directional obd2 scanner can quickly help you to check if a system or component goes well,Improving 200% Efficiency.**Note that Active Tests available depend on the make/model/year of your car.
- 40+ Popular Maintenance Functions: OTOFIX D1 obd scanner for car performs 40+ hot services, including Oil Reset, EPB, TPMS, BMS, E.GR, G.PF, D.PF, SAS Calibration, ABS Bleeding, Injector Coding, Gearbox Match, Suspension, Crankshaft Relearn, Power Balance, etc., still growing. Great choice for DIYers, technician, repair shop. 🚩Get MORE special functions from "Car Brand>System>Service". Check compatibility before purchase via 📧 otofixaftersales-amz@ outlook.com.
- OE-Level All Systems Diagnostic + One-Click AutoVIN & AutoSCAN: OTOFIX D1 scanner automotriz gives you the ability to troubleshoot entire car systems including engion system,transmission system,body system,chassis,etc. 🚩One of the standout features of the D1 obd2 scanner diagnostic tool is the one-click AutoVIN & AutoScan function. This feature allows you to quickly and easily scan all diagnosable ECUs with just one click, and identify any problems hidden in your vehicle's systems.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.