Loading...

NHTSA ID Number: 10075788

Manufacturer Communication Number: T-SB-0001-13

TSB/Document Date: 2016-07-07


Summary

SUMMARY TO BE PROVIDED ON A FUTURE DATE.


@TOYOTAeBay logo
Rev1

T-SB-0001-13

Technical Service Bulletin

January 2, 2013

Maintenance for EV & Auxiliary Batteries
Service
Category
Section

General

ToyotaeBay logo Supports ~

Pre-De livery Service

Market

ASE Certification .

USA

Applicability
YEAR(S)

MODEL(S)

2013-2014

RAV4 EV

ADDITIONAL INFORMATION

REVISION NOTICE
September 6, 2013 Rev1:
• Applicability has been updated to include 2014 model year RAV4 EV vehicles.
Any previous printed versions of this bulletin should be discarded.

Introduction
The RAV4 EV is equipped with 2 types of batteries:

Electric Vehicle (EV) Traction Battery

12-volt Auxiliary Battery

If the RAV4 EV is put into storage, the state of charge (SOC) of the EV battery and auxiliary battery
will gradually decrease. To prevent the auxiliary battery from becoming discharged during storage,
proper maintenance is necessary.

Please perform the following maintenance service for the EV battery and 12-volt auxiliary battery.
NOTE
• Before disconnecting the auxiliary battery, confirm the shift lever is in the "P" position and
apply the parking brake completely. The shift lever CANNOT be shifted from the "P" position
with the 12-volt auxiliary battery disconnected.
• When the negative(-) terminal of the auxiliary battery is reconnected, the EV system may not
operate if the vehicle is already in "Ready On" state. If this occurs, push the Start/Stop switch
to re-initiate the "Ready On" mode. The "Ready" light should illuminate on the Instrument
Panel. If the EV system will not "Ready On" refer to the Repair Manual for diagnosis.

Warranty Information
OP CODE

DESCRIPTION

N/A

Not Applicable to Warranty

© 2013 ToyotaeBay logo Motor Sales , USA

TIME

OFP

T1

T2

Page 1 of 9

@TOYOTAeBay logo

T-SB-0001-13

Rev1

January 2, 2013

Page 2 of 9

Maintenance for EV & Auxiliary Batteries

Maintenance Items
CONDITION"

MAINTENANCE OPERATION

Before Delivery

Fully charge 12-volt auxiliary battery (deliver the vehicle
to the customer after it is fully charged 12 .6 V or more).

To Store for 30 Days or More

Disconnect the negative(-) terminal of the 12-volt
auxiliary battery under the hood to prevent the
SOC of the auxiliary battery from decreasing during
storage due to parasitic current.

Just After Unloading & Every 2 Months

Fully charge EV battery using vehicle charging station .

· The condition also corresponds with the section titles within this bulletin.

Required Tools & Equipment
SPECIAL SERVICE TOOLS (SST)

PART NUMBER

QlY

GR8 Battery Diagnostic Station **

00002-MCGRB

1

•• Essential SST.

NOlE
The GR8 Battery Diagnostic Station (PIN 00002-MCGRS) supersedes the Automatic Trickle Charger
(P/N 00002-YA122-01) and Fast Battery Chargers (Associated PIN ASE6003 and Christie P/N
CAPPDQ). P/N 00002-YA122-01, ASE6003, and CAPPDQ are now obsolete.

Before Delivery
Fully charge the 12-volt auxiliary battery:

1. Before charging the auxiliary battery, turn OFF vehicle, lights, and accessories.

2. Open the hood.

© 2013 ToyotaeBay logo Motor Sales , USA

@TOYOTAeBay logo

T-SB-0001-13

Rev1

January 2, 2013

Page 3 of 9

Maintenance for EV &, Auxiliary Batteries

Before Delivery -Fully charge the 12-volt auxiliary battery: (Continued)

3. Remove the positive(+) terminal cover.

Figure 1.

1

Positive Battery Terminal

2

Negative Battery Terminal.

3

Hold Down Clamp

4. Check the battery SOC.

If the batteryvoltage is LESS THAN 12.6 V, then continue to step 5.

If the battery voltage is 12.6 V or MORE, replace the positive(+) terminal cover and close
the hood.

NOTE
If measuring the voltage with the negative(-) terminal connected, turn vehicle OFF and turn
ON the headlights for 20 to 30 seconds. This will remove the surface charge from the battery.

© 2013 ToyotaeBay logo Motor Sales, USA

@TOYOTAeBay logo

T-SB-0001-13

Rev1

January 2, 2013

Maintenance for EV & Auxiliary Batteries

Before Delivery -Fully charge the 12-volt auxiliary battery: (Continued)

5. Test/charge the 12-volt auxiliary battery using the
GR8 Battery Diagnostic Station.

Figure 2.

A. Connect the red charger clamp to the
positive(+) battery terminal and the black
charger clamp to the negative (-) battery
terminal.
B. Plug the charger into a grounded 110-volt
nominal outlet and flip the power switch to the
"ON" position .
C. Once the charger is properly turned ON,
perform a diagnostic charge.
The GR8 Battery Diagnostic Station will
indicate result when complete.

1

If the battery tests bad ("Replace Battery"),
then replace the auxiliary battery.
NOTE
If the auxiliary battery was stored at 32' F WC)
or below, charge the auxiliary battery in a room
above 32° F WC).
CAUTION
• Charge in a well-ventilated area.
• Do NOT allow sparks or fire near the
auxiliary battery.

If the GR8 Battery Diagnostic Station is NOT
available, you may charge the 12-volt battery by
cycling the vehicle on to "READY"
• Run time will vary depending on the state of
charge.

• If this method is used, you must confirm that
the battery is charged to 12.8 volts using a
DVOM.

© 2013 ToyotaeBay logo Motor Sales , USA

I

P/N 00002-MCGRS

Page 4 of 9

@TOYOTAeBay logo

T-SB-0001-13

Rev1

January 2, 2013

Maintenance for EV & Auxiliary Batteries

Before Delivery -Fully charge the 12-volt auxiliary battery: (Continued)

6_ After charging the auxiliary battery, install the
positive (+}terminal cover.

Figure 3.

1

Positive Battery Terminal

2

Negative Battery Terminal

3

Hold Down Clamp

7. Close the hood.
To Store for 30 Days or More
Disconnect the negative(-) terminal:

1. Turn OFF vehicle, lights, and accessories.
2. Open the hood.

© 2013 ToyotaeBay logo Motor Sales, USA

Page 5 of 9

@TOYOTAeBay logo

T-SB-0001-13

Rev1

January 2, 2013

Maintenance for EV & Auxiliary Batteries

To Store for 30 Days or More · Disconnect the negative (-) terminal: (Continued)

3. Disconnect the negative(-) terminal.

Figure 4.

1

Positive Battery Terminal

2

Negative Battery Terminal

3

Hold Down Clamp

4. Close the hood.
N01E
When it is necessary to move ihe vehicle, reconnect the negative (-)terminal.

© 2013 ToyotaeBay logo Motor Sales, USA

Page 6 of 9

®TOYOTAeBay logo

T-SB-0001-13

Rev1

Page 7 of 9

January 2, 2013

Maintenance for EV & Auxiliary Batteries

To Store for 30 Days or More (Continued)
When removing the vehicle from storage, connect the negative (-) terminal:

1. Open the hood .
2. Connect the negative (-) tenninal.

Figure 5.

Torque: 6.0 N*m (61 kgf*cm, 4.4 ft*lbf)

~~----...-., ~-_fil....c:::ILJZ::~::JY""

~~---~- ~~
1

Positive Battery Terminal

2

Negative Battery Terminal

3

Hold Down Clamp

3. Close the hood.
NOlE
When the negative (-)terminal of the auxiliary battery is reconnected, the EV system may not
operate if the vehicle is already in "Ready On" state. If this occurs, push the Start/Stop switch
to re-initiate the "Ready On" mode. The "Ready" light should illuminate on the Instrument
Panel. If the EV system will not "Ready On" refer to the Repair Manual for diagnosis.

© 2013 ToyotaeBay logo Motor Sales , USA

@TOYOTAeBay logo

T-SB-0001-13

Rev1

January 2, 2013

Page 8 of 9

Maintenance for EV & Auxiliary Batteries

Every Two Months

NOTE
Be sure to reconnect the negative(-) terminal of the auxiliary battery BEFORE performing this
procedure.

1. Park the vehicle next to the EV Charging Station.
2. Apply the parking brake.
3. Turn OFF vehicle, lights, and accessories .
4. Check that the shift lever is in the "P" position.
5. Connect the charging station plug to the vehicle . Confirm that both lights above the charge
plug illuminate. Fully charge the EV battery.
Figure 6.

1

Charging Indicator

4

Charging Port

2

Charging Port Door

5

Charging Cable with CCID (in trunk)

3

Charging Port Cap

6

EV Charging station

© 2013 ToyotaeBay logo Motor Sales , USA

@TOYOTAeBay logo

Rev1

T-SB-0001-13

January 2, 2013

Page 9 of 9

Maintenance for EV & Auxiliary Batteries

Every Two Months (Continued)
Figure 7.

A

I LightA

B

I

Light B

Check the status of the charging indicator. The charging indicator consists of 2 lights that display
charging status by illuminating , flashing, and turning off as follows .
CHARGING INDICATOR
CHARGING STATUS
LIGHT A

The charging cable is connected to
the vehicle and the charging and/or
pre-climate schedule is set

LIGHT B

Lights A and B flash On and Off alternatively fur 10 minutes .
(After 10 minutes both lights rema in Off until charging starts)

Charge level is less than 49%

Flashes

Off

Charge level is between 50%
and less than 99%

Illuminates

Flashes

Charging is complete

Both lights A and B illuminate for 10 minutes.
(After 10 minutes both lights turn Off)

Malfunction occurred during
charging

Both lights A and B quickly flash simultaneously fur 10 seconds.
(After 10 seconds both lights turn Off)

The indicator lights will not flash or turn on when the charging cable is not connected properly.

© 2013 To)":lta Motor Sales , USA

1

SaleBestseller No. 1
Autel Scanner MaxiCOM MK900BT, 2026 MK900-BT V2.0 Bidirectional Diagnostic Tool, 8in Up of MK900 MX900 MK808S MK808BT MX808S MK808Z, 3000+ Active Tests, 40+ Service, CAN-FD&DOIP, All System, FCA 11 OS
  • 💯【Conta.ct us for Support Directly】If you met any...
  • 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
  • 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
  • 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
  • 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
SaleBestseller No. 2
Autel Professional OBD2 Scanner AL319 Code Reader, Enhanced Check and Reset Engine Fault Code, Live Data, Freeze Frame, CAN Car Diagnostic Scan Tools for All OBDII Vehicles After 1996, 2026 Upgraded
  • 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
  • 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
  • 【FOR END USER & DIYERS】 This error code reader AL319 is...
  • 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
  • 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...

Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API


 


If the PDF is very large, it may not load in the preview below.

Download PDF [2.31 MB]


Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.

If the TSB PDF does not show, download or view it on the NHTSA Website.

Click on the (+) Plus Sign

Then Click on Associated Document(s)


Search NHTSA Database for Recalls

View Latest Recalls


Search NHTSA Database for Vehicle Investigations

View Latest Vehicle Investigations


Search NHTSA Database for Vehicle Complaints

View Latest Vehicle Complaints


TSB/Document ID: T-SB-0001-13

Replacement Service Bulletin Number:

MFR Communication Date: 2013-01-02

MFR Internal Campaign ID/Software Version:

Communication Type: Service Bulletin/Repair Instructions

NHTSA Components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL

MFR Component System:

MFR Component Subsystem:


Previous TSB

Next TSB



SaleBestseller No. 1
Autel Scanner MaxiCOM MK900BT, 2026 MK900-BT V2.0 Bidirectional Diagnostic Tool, 8in Up of MK900 MX900 MK808S MK808BT MX808S MK808Z, 3000+ Active Tests, 40+ Service, CAN-FD&DOIP, All System, FCA 11 OS
  • 💯【Conta.ct us for Support Directly】If you met any issues about: Received a registered device/ Language Changing/ Function not Support/ VCI150 Blueto-oth connector malfunction/ Subscription Renewal, please conta.ct us via 📞autelsupply @outlook. com🛣️, we will provide perfect solution for you. ⚠️Note: Autel MK900BT comes with 1-Year Free Software Update, most features will remain active after update subscription expires. 1. For questions regarding updates or need more useful accessories, please conta.ct us via 📞autelsupply @outlook.com🛣️. 2. If the device fails to charge or turn on, please conta.ct us via 📞autelsupply @outlook. com🛣️, we will handle it promptly.
  • 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW MODEL OF MK808S MK900 MX900 MK808BT MX808S】2026 newest Autel MK900BT retains all features of MK808S MX900 MX808S MK808Z MK808Z-BT MK808K-BT, while EXTRA added powerful functions (value 2000+ bucks). The Pro-level Autel MK900BT makes a big leaps: 28+➡40+, 50+➡3000+ Active Tests, 2026 NEW✅CAN FD & DOIP protocols ✅Pre&Post diagnostic report ✅WIFI Print ✅Auto VIN&Auto Scan 2.0 ✅Scan VIN/ License ✅Battery Test (Need purcha.se BT506). If found defect or us.ed, please conta-ct 📞autelsupply @outlook. com📞 get perf-ect solut.ion.
  • 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS906 PRO】Differ from MS906BT MS906 MP808 MK808 MX808 MK808BT only 50 tests, Autel scanner MK900BT escaner automotriz professional offers 3000+ active tests, it can send command to ECUs & monitor actuators operation, quickly locating faulty components. Bidirectional scanning takes your diagnostics to the next level with menu lists 3000+ active tests, such as windows, rear mirrors, sunroof, wipers, fuel injector, coolant fans, radiator fan, AC clutch, coolant pump and more. Note: Functions are not available for all vehicles, please send vehicle VIN to us check compatibility.
  • 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full level-up of OBD2 code reader MaxiCOM MK808S MK808 MK808Z MX808 MK808Z-BT with 28 service, Autel scan tool MK900BT/ MK900-BT offers 40+ maintenance service on 150+ brands 10,000 vehicles from 1996-2025-2026. Hottest Services like: Oil Reset, ABS Bleed, SAS Calibration, Injector Coding, SRS, Throttle Reset, Gearbox Reset, Battery Registration etc. Added 12+ advanced resets: rain slash light sensor reset, HVA.C/ SUS calibration etc. Welcome to send Vehicle Make>Model>Year>VIN>Functions you required to 📞autelsupply @ outlook . com📞 check compatibility.
  • 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE/ AUTO VIN】2026 new release Autel MaxiCOM MK900-BT scan tool embodies all system diagnostic with its 8in display for all vehicles. Like Sna.p-on tools, it can perform ✔Read/Clear Codes✔Displays 5-in-1 Live Data✔Record & Playback Data✔Retrieve Info on all available systems like ABS ECM BCM SRS TCM etc. In addition to Auto VIN technology, Autel MK900BT adds Scan License/ Auto Scan 2.0 to identify vehicle’s VIN/ license, make, year, model, no need manual input; One-click WiFi Printing of Pre&Post comparison diagnostic reports, highlight root causes of problems.
SaleBestseller No. 2
Autel Professional OBD2 Scanner AL319 Code Reader, Enhanced Check and Reset Engine Fault Code, Live Data, Freeze Frame, CAN Car Diagnostic Scan Tools for All OBDII Vehicles After 1996, 2026 Upgraded
  • 【TURN OFF CEL】 This AL319 car scanner diagnostic tool supports Reading and Clearing DTCs, DTC Look Up, displaying Live Data, Freeze Frame & I/M Readiness, view vehicle information, etc., to figure out the root cause of the Check Engine Light (CEL) and turn it off, helping you catch any potential issues early and avoid excessive costs from unnecessary repairs.
  • 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with 7 languages (English, French, Spanish, etc.) and various post-1996 OBD II protocol vehicles (ToyotaeBay logo, NissaneBay logo, HondaeBay logo, FordeBay logo, etc.), this OBD II scanner provides accurate and fast diagnosis for worldwide car owners.
  • 【FOR END USER & DIYERS】 This error code reader AL319 is “plug and play” and comes with an easy interface. Even if you’re not familiar with vehicle repair, you can quickly take control of this obd2 scanner, and get the information you want.
  • 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check engine code reader features a patented One-Click I/M Readiness, TFT color display, built-in speaker, LED Indicator etc. The cable is long enough without being too long and getting in the way. No batteries are needed.
  • 【HIGH-QUALITY SERVICES】 12 months war.ranty from the date of purchase and lifetime free update are offered by this Automobile OBDII scan tool. Welcome to contact us via Q&A, email, or hotline, and our after-sale-service team for technical support.
SaleBestseller No. 3
Autel Scanner MaxiCOM MK808BT PRO, 2026 Bidirectional Tool as MK900BT, Up Ver. of MK900 MaxiCheck MX900 MK808S MX808S, 3000+ Test, 28+ Service, All System Diagnostic, Injector Coding, FCA Android 11
  • 👨‍🎓Tips Before Order: 🚩All function are vehicle-specific - send VIN(17 digits)/Make/Model/Year & needed function via 📞auteldirect @ outlook . com📞 to check before order. 🚩Register tool: a) Follow on-screen guide; or b) Register em-ail on Autel we-b, then bind using SN(back of device) + verification code (find in tool settings or con-tact us via above em-ail). MK808BT PRO comes with ✅English, if need Spanish, please s.end device SN to add. ✅1-year war-ranty. ✅$150 worth 1yr fr-ee updates(New users: ignore renewal alerts). ⚠️📢Post-expiry: Most functions remain functional,for exclusions, refer to A+ Tips. ⚠️Fee for FCAeBay logo AutoAuth Ga.teway(optional): $50/year, charged by AutoAuth,not Autel.
  • 【2026 MK808BT PRO: Same as MK900BT, up of MK900 MX900 MK808S MX808S】Why pay more? 2026 MK808BT PRO functions as MK900BT and saves you 100USD. At same c0st, you now get diagnostic 8X faster and sup-port for 150+ models(1996-2026).💡Dramatically Improved: ✔️Faster & Smarter OS: Android 4.4➡ Android 11 ✔️More Services: 28+➡ 40+ ✔️Bidirectional Control: 50+➡ 3,000+ ✔️Enhanced Hardware: 1/32G➡ 4G/64G ✔️2.4GHz➡ 5G Dual WiFi ✔️Working range: 0.9m➡ 10m+ 🔋Battery test is clear on the large 7in display(BT506 required). 🔔Your Autel scanner is shipped brand new. For any issues(used, damaged, incompatible), e-m-a-il 📞auteldirect @ outlook . com📞 for priority resolution.
  • 👍【New Next-Level Bidirectional Control, 50➡3000+ Tests, Covers Daily Repairs】Unlike the Autel DS708 DS808 MP808 MK808 and MX808 car diagnostic scanners, which offer only 50 functional tests, the Autel bidirectional scan tool MK808BT PRO is equipped with over 3000 active tests. These tests are widely used on car subsystems to help technicians quickly check if the car's actuators are functioning properly. Such as ABS, windows, rearview mirrors, wipers, sunroofs, fuel injectors, AC clutches, coolant fans, radiator fans, coolant pumps,etc. Tips📢: All functions are vehicle-specific, not universal to all vehicles,pls send VIN to 📞auteldirect @ outlook . com📞check compatibility before order.
  • 👍【28+ Hot Services for 150+ Makes】Autel scan tool MK808BT PRO, upgraded with a BT VCI MinieBay logo(valued at 120USD), surpasses the old wired OBDII scanner MK808S MK900, by providing a convenient 33ft wireless working range, offering greater freedom and comfort compared to the 3.3ft cable limit of the MK900 MK808S MX808S car scanner. New features include VIN Check across different modules for comparison and 28+ resets, such as injector coding, ABS autobleed, Oil reset, SAS cali.bration, BMS, throttle relearn, suspension adjustments, etc. ⚠️📢Tips: Service functions are vehicle-specific, not universal to all vehicles, pls send VIN to 📞auteldirect @ outlook . com📞check compatibility before order.
  • 👍【All Available Module Diagnosis - OE-Level Scanner】The OE versatile OBDII scan tool MK808BT PRO escaner para autos effectively works with all car systems: ABS, ECM, BCM, SRS, TCM,etc. It identifies vehicles via AutoVIN/manual input/select, like S.nap-on tools, it can ✔read/clear 7000+ DTCs, ✔read ECU info, ✔view 5-in-1 live data, ✔perform active tests, and ✔reset services. ✔Reports can be shared via QR-code and printed, working globally and 21+ multilingual. Supports 150+ US/EU/Asian makes, with ongoing updates from 2024 to 2026. ⚠️Note📢: The AutoVIN function usually works for post-2006 cars, depending on if the vehicle's VIN is stored in the ECU. You can always do manual input/select.

Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API


 


This product presentation was made with AAWP plugin.

Share to...