NHTSA ID Number: 10075712
Manufacturer Communication Number: P10859
TSB/Document Date: 2016-07-07
Summary
Certain MACK
CHU, CXU, and GU trucks built between 11/11/2013 and 01/14/2015, equipped with front radar may experience loss of front object detection or erratic operation of cruise control functions. The terminal seals of the harness is allowing moisture and corrosion to build up in the front radar harness. To ensure proper operation of the front radar, the harness is inspected for the proper seal and/or corrosion. If the harness or seal fail inspection, replacement of the harness is required. Follow the inspection and repair procedures outlined in this document.
Service Program
Trucks
Mack Trucks, Inc.
Greensboro, NC USA
This Service Program replaces PV729–PI0859, “Front Radar, Failure
(USA74318)” dated 01.2016.
Date
Group
No.
Release
Page
3.2016
366
859
04
1(19)
Front Radar, Failure
CHU, CXU, GU
PI0859, Front Radar, Failure
(March 2016)
Certain MACK CHU, CXU, and GU trucks built between 11/11/2013 and 01/14/2015,
equipped with front radar may experience loss of front object detection or erratic operation of
cruise control functions. The terminal seals of the harness is allowing moisture and corrosion
to build up in the front radar harness. To ensure proper operation of the front radar, the
harness is inspected for the proper seal and/or corrosion. If the harness or seal fail
inspection, replacement of the harness is required. Follow the inspection and repair
procedures outlined in this document.
If the truck is eligible for this repair, call 1-877-986-5862 and provide the following information:
17 digit Vehicle Identification Number (VIN), Product Improvement Number (PI0859), Dealer
Code, and the Purchase Order (PO) Information.
Note: This bulletin does not apply to MACK Trucks Australia.
W3109331
Required Parts
Front Radar Replacement Parts
PV729-PI0859
Item
Description
Part Number
Qty
1
Harness, Front Antenna
22638506
1
2
Clamp, Universal
20428158
3
3
Cable Tie
980464
2
USA75686
Mack Trucks, Inc.
Service Program
Date
3.2016
Group
No.
Release
366
859
04
Decommissioning the Truck for Repair
You must read and understand the precautions and guidelines in Service Information,
group 30, "General Safety Practices, Electrical" before performing this procedure. If you
are not properly trained and certified in this procedure, ask your supervisor for training
before you perform it.
NOTE: Information is subject to change without notice. Illustrations are used for reference
only and can differ slightly from the actual vehicle being serviced. However, key
components addressed in this information are represented as accurately as possible.
1 Park the vehicle on a flat and level surface.
2 Apply the parking brake.
3 Place the transmission in neutral or park.
4 Install the wheel chocks.
W7086748
Page
2(19)
Mack Trucks, Inc.
Service Program
Date
3.2016
Group
No.
Release
366
859
04
5 Disconnect all of the cables from the battery’s negative terminals.
W3086747
Front Radar Inspection
1 Disconnect the radar connector.
W3103584
Page
3(19)
Mack Trucks, Inc.
Service Program
Date
3.2016
Group
No.
Release
366
859
04
2 Inspect the radar connector for water intrusion and corrosion on the terminal pins.
Note: If there are signs of water intrusion, corrosion of the harness , continue to page 5
(Front Radar Harness Replacement) section and follow the replacement procedure.
3 Inspect the harness to determine if the proper seal was installed in the connector housing.
Note: If the color of the terminal seals are (BLACK) , connect the radar connector, and no
further action is required. Continue to page 18, (Commission the truck for Operation),
and follow steps 1 – 2.
Note: If the color of the terminal seals are (YELLOW), continue to page 5, (Front Radar
Harness Replacement) and replace the harness.
W3103448
4 If corrosion is found in the front radar module, clean the connector pins with contact
cleaner to remove any trace of corrosion or debris. If corrosion is present after cleaning,
create and submit an e-Service case with attached photos to determine if the front radar
module requires replacement.
Page
4(19)
Mack Trucks, Inc.
Service Program
Date
3.2016
Group
No.
Release
366
859
04
Front Radar Harness Replacement
1 Open the hood.
W8090572
2 Remove the fasteners and flat washers securing the front radar sensor and shroud.
Note: Store the flat washers, and fasteners in a clean and secure location for installation.
W3103585
Page
5(19)
Mack Trucks, Inc.
Service Program
Date
3.2016
Group
No.
Release
366
859
04
3 Remove the front radar sensor, spacers, and shroud.
Note: Store the front radar sensor, spacers, and shroud in a clean and secure location for
installation.
W3103588
4 Remove the cable ties securing the front radar harness.
5 Disconnect the front radar harness from the main cab harness.
W3103450
Page
6(19)
Mack Trucks, Inc.
Service Program
Date
3.2016
Group
No.
Release
366
859
04
6 Remove the existing front radar harness.
Note: Note the routing of the existing harness for installation of the replacement harness.
7 Route the replacement front radar harness into position as noted.
8 Connect the replacement front radar harness to the main cab harness.
W3103450
9 Use the cable ties listed on page 1 to secure the front radar harness.
Note: Ensure there is enough harness at the other end to connect to front radar sensor.
10 Position the front radar sensor, spacers, and shroud.
W3103588
Page
7(19)
Mack Trucks, Inc.
Service Program
Date
3.2016
Group
No.
Release
366
859
04
11 Install the fasteners and flat washers securing the front radar sensor and shroud.
W3103585
12 Tighten the fasteners securing the front radar sensor and shroud to 27 ± 4 Nm (20 ± 3 ftlb).
13 Connect the front radar harness to the radar module.
W3103584
Page
8(19)
Mack Trucks, Inc.
Service Program
Date
3.2016
Group
No.
Release
366
859
04
14 Close the hood.
W8090584
15 Continue to page 18, and (Commission the truck for Operation).
Front Radar and Harness Replacement
1 Open the hood.
W8090572
Page
9(19)
Mack Trucks, Inc.
Service Program
Date
3.2016
Group
No.
Release
366
859
04
2 Remove the fasteners and flat washers securing the front radar sensor and shroud.
Note: Store the flat washers, and fasteners in a clean and secure location for installation.
W3103585
3 Remove the front radar sensor, spacers, and shroud.
Note: Return radar assembly to the Core Hub for credit and processing.
Note: Store spacers and shroud in a clean and secure location for installation.
W3103588
Page
10(19)
- 2026 ALL-IN-ONE HEAVY DUTY TRUCK SCANNER – BUILT FOR...
- 42+ RESET FUNCTIONS – MORE THAN A BASIC TRUCK CODE...
- ACTIVE TEST & ECU CODING – ADVANCED BIDIRECTIONAL SCAN...
- FULL-SYSTEM HDOBD/OBD2 DIAGNOSTICS – WIDE TRUCK & ENGINE...
- PROFESSIONAL HARDWARE + RELIABLE SUPPORT – BUILT FOR DAILY...
- 【Built for Heavy Duty Diesel Diagnostics】Designed for...
- 【Full System Diagnostics+All HD OBD Modes】The New HD...
- 【Wide Heavy-Duty Vehicle Coverage】Supports a wide range...
- 【Speaks Major Truck Protocol】The New HD601 diesel truck...
- 【Save Hundreds on Diagnostic Fees】Why pay $150–300 for...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: P10859
Replacement Service Bulletin Number:
MFR Communication Date: 2016-03-01
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
Last update on 2026-06-30 / Affiliate links / Images from Amazon Product Advertising API
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.