NHTSA ID Number: 10075655
Manufacturer Communication Number: 15-087
TSB/Document Date: 2016-07-07
Summary
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Service Bulletin
15-087
February 18, 2016
02870 Version 2
Wind Noise from the Driver’s or Front Passenger’s Window
Supersedes 15-087, dated December 4, 2015, to revise the information highlighted in yellow.
AFFECTED VEHICLES
Year
2015
Model
Accord
2016
Accord
Trim
4-Door
4-Door L4
4-Door V6
VIN Range
ALL
1HGCR2…GA000001 to 1HGCR2...GA057090
1HGCR3…GA000001 to 1HGCR3...GA009609
REVISION SUMMARY
Under WARRANTY CLAIM INFORMATION, the failed part numbers were changed.
SYMPTOM
There is a noticeable wind noise at ear level from either the driver’s or the front passenger’s window.
POSSIBLE CAUSE
The wind noise is caused by a gap between the run channel and inner sash.
CORRECTIVE ACTION
Test-drive the vehicle to determine the location(s) of the wind noise. If the noise is heard at ear level from either the
driver’s or front passenger’s window or along the B-pillar, tape it off and see if the noise goes away. If the noise goes
away, this bulletin applies. If the noise is still heard, the bulletin does not apply. Troubleshoot and repair as needed.
Based on your results, apply EPT sealer to the run channel groove.
REQUIRED MATERIALS
Part Name
EPT Sealer
Part Number
Quantity
06990-SA5-000
1
08F20-S9A-10003
1
Commercially
available
1
Commercially
available
1
(One roll repairs about 165 vehicles.)
Adhesion Promoter Kit
(One packet repairs one vehicle.)
3M Adhesion Promoter #06396
(Use if 08F20-S9A-10003 is not available. One box fixes 10 vehicles.)
Rubbing Alcohol (degreaser)
CUSTOMER INFORMATION: The information in this bulletin is intended for use only by skilled technicians who have the proper tools,
equipment, and training to correctly and safely maintain your vehicle. These procedures should not be attempted by “do-it-yourselfers,” and you
should not assume this bulletin applies to your vehicle, or that your vehicle has the condition described. To determine whether this information
applies, contact an authorized Honda
automobile dealer.
© 2016 American Honda Motor Co., Inc. – All Rights Reserved
Page 1 of 4
WARRANTY CLAIM INFORMATION
For one side – use the following warranty information.
Operation
Number
8150B3
Description
Clean and apply EPT sealer
on the left or right side
window. (Includes test drive.)
Flat Rate
Time
Template ID
Defect
Code
Symptom
Code
Failed Part
Number
0.4 hr
15-087A
07408
05604
72235-T2F-A02
Template ID
Defect
Code
Symptom
Code
Failed Part
Number
15-087B
07408
05604
72235-T2F-A02
For both sides – use the following warranty information.
Operation
Number
8150B3
A
Description
Flat Rate
Time
Clean and apply EPT sealer
on the left or right side
window. (Includes test drive.)
0.4 hr
For the opposite side - add
0.4 hr
Skill Level: Repair Technician
INSPECTION
Check the vehicle to determine the location(s) of the wind noise.
• If the wind noise is heard at ear level from either the driver’s or front passenger’s windows or along the B-pillar, tape
it off and see if the noise goes away, If the noise goes away, go to REPAIR PROCEDURE.
• If the wind noise is heard elsewhere, this service bulletin does not apply. Continue normal troubleshooting
procedures.
Page 2 of 4
REPAIR PROCEDURE
NOTE: Repair only the affected side.
Apply EPT sealer to the run channel groove.
1. Remove the run channel from the upper part of the door frame.
2. Remove the run channel from the top corner of the B-pillar to B Line.
3. Clean the run channel groove along the B-pillar with rubbing alcohol.
4. Apply primer (3M Adhesion Promoter 4298UV) to the run channel groove along the B-pillar.
Page 3 of 4
5. Cut a strip of EPT sealer that measures 3 mm x 400 mm x 3 mm and attach it to the groove of the run channel.
Start at the top corner and install the strip down the run channel. Center the strip around the hash marks on the run
channel.
• Install the run channel by attaching at the Y-corner.
• Install the run channel down the B-pillar by attaching the outside edge first, then attaching the inside edge.
• Install the run channel along the top of the door frame.
NOTE: The corner may require some force to be properly installed.
6. Push the run channel up against the sash trim to set the EPT sealer, then check for any gaps or visible sealer.
7. Check that the wind noise is gone.
END
Page 4 of 4
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 15-087
Replacement Service Bulletin Number:
MFR Communication Date: 2016-02-18
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: STRUCTURE:EMERGENCY:ESCAPE/EGRESS/EXIT
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.