PERFECT DELIVERY INSPECTION (PDI)

2015

A3

Audi Technician Report

Stock No.

Dealer Number

R.O. No.

VIN

Road test mileage out

Road test mileage in

All items must be completed prior to customer delivery by an Audi
technician
**Refer to the Special functions tab of ODIS Diagnosis using GFF
for the PDI function tests
**Audi recommends using an Audi approved battery charger to
prevent excessive battery discharge during inspection
Open Campaigns/Updates
 Check Elsa for open campaigns and updates. Perform
campaigns not requiring SVM if applicable. Campaigns
requiring SVM should only be performed after the vehicle has
been taken out of transport mode.

Trunk Inspection
 Install wheel bolt cover removal tool from PDI kit and wheel
lock key (if applicable) into trunk tool kit behind right side
cover
 Set spare tire pressure
 Verify operation of trunk emergency release handle (if
equipped)
Exterior
 Test windshield washers and headlight washers (if equipped)
for aim and function
 Test exterior lighting functions

Battery Inspection
 Check battery clamps for proper torque. Re-torque if required
 Perform the A-battery test for new batteries using GFF in ODIS
Diagnosis –> Special functions –> Service work. Select option
2, the battery test for new batteries as part of the pre–delivery
inspection and act according to the test result (ok, recharge,
replace). Ensure diagnosis log is uploaded to the GFF paperless
server by selecting “ok” when tester wants to send the current
generated diagnosis protocol online. (Note: Do not use Guided
Function. The diagnosis log will not be uploaded to GFF paperless)

 Check key functionality including seat memory (if applicable),
verify vehicle starts and runs with the start/stop button, verify
all doors lock/unlock with remote and Advanced Key, including
door handle sensors (if equipped)
Interior
 Check operation of all switches: locks, windows, seat adjustment, and child safety features
 Calibrate rear view mirror compass to proper zone and check
self-dimming function/lighting (if equipped)

Transport Mode Deactivation, DTC check, set service reminder

 Verify operation of all interior lights

 Deactivate vehicle transport mode (via Special functions –>
Service work –> 19-Transport mode activating/deactivating )

 Mirrors: Inspect folding, adjustments, RH tilt in reverse, and
memory (if equipped)

 Set service reminder (via Special functions –> Service work –>
17-PDI-resetting SRI at PDI, counter reset, etc.)

 Inspect operation of lighter, aux. outlet under armrest and rear
outlet

 Deactivate the anti-theft function for the Navigation DVD using
the Scan Tool. Follow the process outlined in TSB 2013790

 Verify operation of all front and rear seat belts and latches

 For MMI3G+ vehicles, set adaptation channel (via Special
functions –> Service work –> : 5F–Activating/deactivating
storage of music). Also referred to as CD Ripping.

 Check sunroof operation (open/close/vent/deflector at edge)

 Perform an SVM specified /actual comparison (via Special
functions ->Software Version Management (SVM))
 Perform any campaign update requiring SVM at this time
(follow instructions listed in campaign documentation)
Under the Hood Fluid Check and Inspection

 Check horn operation
 Passenger side airbag: Verify operation of Passenger Occupant
Detection System
Radio
 Affix anti-theft code sticker found in prep package to this page
 Verify operation of CD player
 Verify operation of AMI or aux. input (if equipped)

 Check all fluid levels and top off if necessary

 SD card slot: Insert SD card and test function (Test all SD card
slots as equipped)

 Check engine oil level via the MMI – fill oil to the max level
when the vehicle is at operating temperature

 Verify HD Radio is turned “off” in Radio/Settings Menu

Effective 12-6-2013-US
Version 1.0

1 of 3

PERFECT DELIVERY INSPECTION (PDI)

2015 A3 | Audi Technician Report

Stock No.

Dealer Number

R.O. No.

VIN

Road test mileage out

Road test mileage in

Audi MMI/Navigation

On-Hoist Inspection (continued)

 Verify and set Language and Measurement Units in Setup/
Settings menu

 Inspect wheel bolts for proper torque using torque wrench

 Set Time source setting to “GPS” and set Auto daylight savings
time to “on.” Change time zone appropriate to the dealer
location
 Navigation location: Set dealership location (for following back
to dealership during road test)
 Set the “Music volume while parking” to 6 lines (accessed via
MMI rear view camera display:
Settings > Music volume while parking)(applies to vehicles with
park assist or rear view camera)

 Install wheel bolt covers and center caps as supplied
 If a known “sold” unit, set to appropriate Normal Load
Condition. SEE LIST BELOW. If going to stock, set to maximum
recommended tire pressures listed on the B-pillar doorjamb,
and store tire pressure values in Car/System menu
A3 1.8:
225/45 R17 91Y high performance 32 front/29 rear
225/40 R18 92Y XL high performance 35 front/32 rear
225/45 R17 91H all season 35 front/32 rear

 Voice Activation (if equipped): Press the “Talk” button and
verify several commands

225/40 R18 92H XL all season 35 front/32 rear

Onboard Video Tutorials

Compact spare wheel T125/70 R18: 60

(For cars produced as of the first week of November 2013)

A3 2.0:

 Load Onboard Video Tutorials> Turn ignition on> Insert the
Onboard DVD into the DVD Drive > Select the CAR function
button. System will initialize> Select the Owner’s Man. function by selecting the upper right control button> Select “Yes”>
Select “CD/DVD”> Select “Start update”> Turn off ignition to
start update (the update will take approx. 5 minutes)> Once
completed, remove the disk and place back into the case for
the next vehicle

225/45 R17 91Y high performance 33 front/30 rear

Audi connect (USA ONLY) (if equipped)
 Verify Audi connect Information Packet is present, including
Audi brochure, T-Mobile brochure, customer SIM card, T-Mobile
Terms & Conditions (T&C)(if applicable)

235/35 R19 91Y XL high performance 32 front/29 rear

225/40 R18 92Y XL high performance 33 front/30 rear
225/45 R17 91H all season 36 front/33 rear
225/40 R18 92H XL all season 36 front/33 rear
235/35 R19 91Y XL high performance 33 front/30 rear
Compact spare wheel T125/70 R18: 60
Road Test
 Check for squeaks, rattles and wind noise
 Verify engine performance and acceleration

 Connect the dealer demo SIM card to the vehicle and make
sure the system fully connects to 2G or 3G (2G or 3G symbol
with arrows)(only applies if in a T-Mobile service area)

 Verify operation of rear view camera and rear parking sensors
(if equipped)

 Enable Google Earth in the navigation settings and verify the
white Google Logo appears next to the 2G or 3G symbol

 Verify Audi active lane assist functionality (if equipped)

 Ensure the wireless network is turned on (TEL function button
> Settings Ctrl button > Wi-Fi settings > Wi-Fi active > select
“Visible”)
 Check Wi-Fi hotspot functionality is enabled and verify the
SSID is set to “AUDIXXXXX,” where XXXXX = the last five digits
of VIN that are automatically preset in the system.

 Verify Audi side assist functionality (if equipped)
 Check steering/tire alignment
 Test drive vehicle, applying brakes at least 4 times at 20 mph
(35 km/h) to clean brake rotors Check for abnormal noise/
vibration/pulsation
 Parking brake: Apply and verify hold and release
 Verify quality of radio reception in AM/FM/SAT bands

On-Hoist Inspection

 Verify cruise control/ACC (if equipped)

 Check underside of vehicle for fluid leaks and loose components

 Seat heating (if equipped): Inspect for proper operation

 Check steering, boots, brake system, hoses, tires and wheels
for damage

 Climate control: Check all functions and ensure proper A/C
cooling

 Remove transport suspension blocks (if installed)

 Navigation function (if equipped): Activate NAV and follow
directions back to dealership

Effective 12-6-2013-US
Version 1.0

2 of 3

PERFECT DELIVERY INSPECTION (PDI)

2015 A3 | Audi Technician Report

Stock No.

Dealer Number

R.O. No.

VIN

Road test mileage out

Road test mileage in

Post-Road Test Inspection

Showroom Display / Inventory Storage / Demo Vehicle

 Interrogate fault memory using the Scan Tool and print
Diagnostic Log

 Install showroom charger to ensure battery remains charged at
all times

 Record final mileage on checklist and sign checklist

 Apply Inventory Maintenance Sticker

 Ensure the yellow tire pressure tag is installed on steering
wheel

 Install standard wiper blades (if not already installed)

Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.
Technician Signature

Effective 12-6-2013-US
Version 1.0

Completion Date

3 of 3