PERFECT DELIVERY INSPECTION (PDI)

2014

A7/S7/A7 TDI/RS 7

Audi Technician Report

Stock No.

Dealer Number

R.O. No.

VIN

Road test mileage out

Road test mileage in

All items must be completed prior to customer delivery by an Audi
technician
**Refer to the Special functions tab of ODIS Diagnosis using GFF
for the PDI function tests
**Audi recommends using an Audi approved battery charger to
prevent excessive battery discharge during inspection

Trunk Inspection (continued)
FF     Place the lug cap removal tool, located in the bypack, into the
toolkit (where applicable)
FF     Set spare tire pressure
Under the Hood Fluid Check and Inspection

Open Campaigns/Updates

FF     Check all fluid levels and top off if necessary

FF     Check Elsa for open campaigns and updates. Perform
campaigns not requiring SVM if applicable. Campaigns
requiring SVM should only be performed after the vehicle has
been taken out of transport mode.

Exterior
FF     Test windshield washers for aim and function
FF     Test exterior lighting functions

Battery Inspection

FF     Check tailgate opening and closing with remote (if applicable)

FF     Check battery clamps for proper torque. Re-torque if required

FF     Check key functionality: Including seat and steering wheel
position memory (if applicable); verify vehicle starts and runs
with the start/stop button; verify all doors lock/unlock with
remote and advanced key, including all door handle sensors
with the advanced key (if equipped)

FF     Perform the A-battery test for new batteries using GFF in ODIS
Diagnosis –> Special functions –>Service work. Select option 2, the
battery test for new batteries as part of the pre–delivery inspection and act according to the test result (ok, recharge, replace).
Ensure diagnosis log is uploaded to the GFF paperless server by
selecting “ok” when tester wants to send the current generated
diagnosis protocol online. (Note: Do not use Guided Function. The
diagnosis log will not be uploaded to GFF paperless)

Interior

Transport Mode Deactivation, DTC check, set service reminder

FF     Check operation of all switches: Locks, windows, seat adjustment, seat ventilation/heating (front and rear where
applicable) and child safety features. Check rear lid opening
and closing with switch in door (ignition must be on)

FF     Deactivate vehicle transport mode (via Special functions –>
Service work –> 19-Transport mode activating/deactivating )

FF     Rear view mirror: Check self-dimming function/lighting (if
equipped)

FF     Deactivate air suspension loading mode (via Special Functions
-> Service Work -> 34-Loading mode activating/deactivating)
(S7/RS 7only)
Warning! Car body may lower!

FF     V
erify operation of all interior lights, including ambient lighting

FF     Set service reminder (via Special functions –> Service work –>
17-PDI-resetting SRI at PDI, counter reset, etc.)
FF     For MMI3G+ vehicles, set adaptation channel (via Special
functions –> Service work –> : 5F–Activating/deactivating
storage of music)
FF     Perform an SVM specified /actual comparison (via Special
functions ->Software Version Management (SVM))
FF     Perform any campaign update requiring SVM at this time
(follow instructions listed in campaign documentation)

FF     Mirrors: Inspect folding, adjustments, RH tilt in reverse, and
memory
FF     Inspect operation of lighter, aux. outlet under armrest, under
rear vent outlets, and in luggage compartment on passenger
side
FF     Verify operation of all front and rear seat belts and latches
FF     Check horn operation
FF     Check sunroof operation (open/close/vent/deflector at edge)
FF     Turn on the night vision camera and verify operation (if
equipped)
FF     Check rear spoiler operation using control in console

Trunk Inspection

FF     Rear Climate Controls: Verify heating and cooling functions and
open all rear panel vents (center and b-pillar)

FF     Install wheel bolt cover removal tool from PDI kit into trunk lid
toolkit

FF     Passenger side airbag: Verify operation of Passenger Occupant
Detection System

Effective 10-1-2013
Version 1.0

1 of 3

PERFECT DELIVERY INSPECTION (PDI)

2014 A7/S7/A7 TDI/RS 7 | Audi Technician Report

Stock No.

Dealer Number

R.O. No.

VIN

Road test mileage out

Road test mileage in

Interior (continued)

Audi connect (if equipped) (USA ONLY)

FF     Start-Stop-System info (if applicable): Verify the velum sticker
is on the start/stop button. Remove the start/stop
information card from the car kit and place it in the glove box
with the owner’s manuals. Additional supply can be ordered via
the Brand Store on AccessAudi

FF     Verify Audi connect Information Packet is present, including
Audi brochure, T-Mobile brochure, customer SIM card, T-Mobile
Terms & Conditions (T&C) (if applicable)

Radio
FF     Verify operation of CD changer (if equipped)
FF     Verify operation of DVD player
FF     Verify operation of AMI
FF     SD card slot: Insert SD card and test function (Test all SD card
slots as equipped)
FF     Verify HD Radio is turned “off” in Radio/Settings Menu
(USA ONLY)
Audi MMI/Navigation
FF     Verify and set Language and Measurement Units in Setup Menu
FF     Set Time source setting to “GPS” and set Auto daylight savings
time to “on”Change time zone appropriate to the dealer
location
FF     Program the presets to local stations
FF     Navigation: Set dealership location (for following back to
dealership during road test)
FF     Voice Activation: Press the “Talk” button and verify several
commands
FF     Set the “Music volume while parking” to 6 lines (accessed via
MMI rear view camera display, Settings > Music volume while
Parking)(applies to vehicles with park assist or rear view camera)
Onboard Video Tutorials
FF     Load Onboard Video Tutorials
FF     Turn ignition on
FF     Insert the Onboard DVD into the DVD Drive
FF     Select the CAR function button. System will initialize
FF     Select the Owner’s Man. function by selecting the upper right
control button

FF     Connect the dealer demo SIM card to the vehicle and make sure
the system fully connects to 2G or 3G (2G or 3G symbol with
Box surrounding it) (only applies if in a T-Mobile service area)
FF     Enable Google Earth in the navigation settings and verify the
white Google Logo appears next to the 2G or 3G symbol
FF     Ensure the wireless network is turned on (TEL function button
> Settings Ctrl button > Wi-Fi settings > Wi-Fi active > select
“Visible”)
FF     Check Wi-Fi hotspot functionality is enabled and verify the
SSID is set to “AUDIXXXXX,” where XXXXX = the last five digits
of VIN that are automatically preset in the system.
On-Hoist Inspection
FF     Remove Hoist Access Point Trim Covers if equipped (Prestige/
S-Line only)
FF     Inspect wheel bolts for proper torque using torque wrench
FF     Check underside of vehicle for fluid leaks and loose
components
FF     Check steering, boots, brake system, hoses, tires and wheels
for damage
FF     Install wheel bolt covers from PDI kit on all wheels
FF     Set tires to maximum recommended tire pressures listed on
the B-pillar door jamb and store tire pressure values in Car/
System menu
FF     Remove Transport Blocks from shocks
FF     After removing transport blocks, secure Additional Springs
(a.k.a. bump stops) by pressing into tube of upper shock mount
Road Test
FF     Check for squeaks, rattles and wind noise
FF     Verify operation of Audi parking system plus with rear view
camera and top or corner view cameras (if equipped)

FF     Select “Yes”

FF     Verify Vehicle Head-up Display functionality. Verify the image
can be adjusted properly in the viewing area of the windshield
(if equipped)

FF     Select “CD/DVD”

FF     Verify engine performance and acceleration

FF     Select “Start update”

FF     Verify transmission operation, including shift paddles

FF     Turn off ignition to start update (the update will take approx. 5
minutes)

FF     Verify engine Start-Stop-System functionality (if equipped)

FF     Once completed, remove the disk and place back into the case
for the next vehicle
Effective 10-1-2013
Version 1.0

FF     Check steering/tire alignment
FF     Check heated steering wheel operation (if equipped)
2 of 3

PERFECT DELIVERY INSPECTION (PDI)

2014 A7/S7/A7 TDI/RS 7 | Audi Technician Report

Stock No.

Dealer Number

R.O. No.

VIN

Road test mileage out

Road test mileage in

Road Test (continued)

Post-Road Test Inspection

FF     Test drive vehicle applying brakes at least 4 times at 20 mph
(35 km/h) to clean brake rotors. Check for abnormal noise/
vibration

FF     Interrogate fault memory using the VAS tester and print
Diagnostic Log

FF     Verify quality of radio reception in AM/FM/SAT bands
FF     Verify cruise control/ACC with Stop & Go functionality (if
equipped)
FF     Verify Audi side assist functionality (if equipped)

FF     Record final mileage on checklist and sign checklist
FF     Ensure the yellow tire pressure tag is installed on steering
wheel

FF     Verify Audi active lane assist functionality (if equipped)

If Vehicle is for Showroom Display/Inventory Storage or Demo
Use

FF     Climate Control: Check heating and cooling functions and open
all panel vents

FF     Install showroom charger to ensure battery remains charged at
all times

FF     Seat heating and cooling (if equipped): Check for proper
operation

FF     Apply Inventory Maintenance Sticker
FF     Install standard wiper blades (if not already installed)

FF     Navigation function: Activate NAV and follow directions back to
dealership. Verify NAV directions are visible in Head-Up Display
(if equipped)
Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.
Technician Signature

Effective 10-1-2013
Version 1.0

Completion Date

3 of 3