NHTSA ID Number: 10073250
Manufacturer Communication Number: 054
TSB/Document Date: 2016-06-22
Summary
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
GROUP
TRA
MODEL
2015MY
K900 (KH)
NUMBER
054
DATE
September 2014
TECHNICAL SERVICE BULLETIN
susJEcr:
K900 {KH) SHIFT LOGIC IMPROVEMENT - TCM UPGRADE
This bulletin provides information related to an upgrade of the TCM software for 2015MY K900
vehicles, produced prior to April 15, 2014, which may exhibit a "rough shift feeling" concern,
particularly when downshifting from third to second gear. To correct this concern, reflash the
TCM (Transmission Control Module) as described in this TSB. For confirmation that the latest
reflash has been done to a vehicle you are working on, verify ROM ID using the tables in this
TSB.
Global Diagnostic System (GOS)
*NOTICE
After performing the software upgrade, make sure to reset/relearn the TCM Adaptive
Learning Values. Access KGIS and follow the path shown below:
K900(KH) > 2015 > G 5.0 GDl-TAU >Automatic Transmission System (A8TR1-SBW).
File Under:
Circulate To:
0
0
Service Advisor(s)
General Manager
0
Service Manager
0
l:8J Technician(s) l:8J Body Shop Manager 0
Parts Manager
Fleet Repair
Page 2 of 6
TCM Upgrade Procedure:
To correct this condition, the TCM should be reprogrammed using the GOS
Download, as described in this bulletin.
UPGRADE EVENT NAME
233.KH 5.0GDI 3-2 SHIFT LOGIC IMPROVEMENT
*NOTICE
•
A fully charged battery is necessary before ECM upgrade can take place. It is
recommended that the Midtronics GRB-1299 system be used in ECM mode during
charging. DO NOT connect any other battery charger to the vehicle during ECM upgrade.
•
All ECM upgrades must be done w ith the ignition key in the 'ON' position.
•
Be careful not to disconnect any cables connected to the vehicle or GOS during the ECM
upgrade procedure
•
DO NOT start the engine during ECM upgrade.
•
DO NOT turn the ignition key 'OFF' or interrupt the power supply during ECM upgrade.
•
When the ECM upgrade is completed, turn the ignition 'OFF' and wait 20 seconds before
starting the engine.
•
ONLY use approved ECM upgrade software designated for the correct model, year.
Before attempting an ECM upgrade on any Kia
model, make sure to first determine
whether the particular model is equipped with an immobilizer security system.
Failure to follow proper procedures may cause the PCM to become inoperative after
the upgrade and any claims associated with this repair may be subject to
chargeback.
~
TSB: TRA 054 K900 (KH) September 2014
Page 3 of 6
-
! { l:OGIC IMPROVEMENT - TCM UPGRADE
ROM ID INFORMATION TABLES :
Upgrade event #233 K900 (KH)
ROMID
MODEL
K900(KH)
5.0
GDI
T/M
A/T
TCM P/N
95440-4EDBO
PREVIOUS
NEW
SKHOG50NB1
SKHOG50NB2
SKHOG50NB3
SKHOG50NB4
SKHFG50NB5
To verify the vehicle is affected, be sure to check the Calibration Identification of the
vehicle's ECM ROM ID and reference the Information Table as necessary.
1.
Connect the power supply cable to the GDS.
*NOTICE
If attempting to perform the ECM upgrade with the power supply cable
disconnected from the GOS, be sure to check that the GOS is fully charged
before ECM upgrade. If the GOS is not fully charged, failure to perform the ECM
upgrade may occur. Therefore, it is strongly recommended that the power
supply connector be connected to the GOS.
2.
Connect the USB cable between the VCI and the GDS.
*NOTICE
When performing the ECM upgrade using the GOS, wireless communication
between the VCI and GOS is not available. Therefore, be sure to connect the
USB cable between the VCI and the GOS.
3.
Connect the Main 16-pin DLC cable (GHDM - 241000) to the VCI.
4.
Connect the Main 16-pin DLC cable
(GHDM - 241000) to the OBD-11
connector, located under the driver's
side of the instrument panel.
TSB: TRA 054 K900 (KH) September 2014
Page 4 of 6
5.
With the ignition key ON, turn ON the VCI and GOS. Access the GOS vehicle identification
number (VIN) screen and configure the vehicle using the VIN AUTO DETECT Function.
6.
Select A/T system and click OK.
~
System
l'3lI!lm
Select System
Selected System
1111
Symptom
'""'F ault Code
Se~rching
1
--
·
-
OK
.~
--
Ca~cel
-
1
7.
Select ECU Upgrade from the bottom right-hand corner. Next select Auto Mode, and then
Engine. Perform the ECM upgrade in accordance with normal GOS ECM upgrade
procedures.
8.
When the GOS reports that the ECM upgrade has been successfully completed, click OK,
turn OFF the ignition key, and wait at least 10 seconds before attempting to start the
engine.
9.
Check if any incidental Diagnostic Trouble Codes DTC(s) have been created by the
upgrade process; clear any DTC(s) that may be present.
10. After the upgrade is complete, reset/relearn the TCM Adaptive Learning Values. The
procedure can be found at: KGIS > K900(KH) > 2015 > G 5.0 GOl-TAU > Automatic
Transmission System (A8TR 1-SBW).
11. Confirm proper operation of the vehicle.
TSB: TRA 054 K900 (KH) September 2014
Page 5 of 6
& CAUTION
Before attempting an ECM upgrade on any Kia model, make sure to first determine
whether the particular model is equipped with an immobilizer security system.
Failure to follow proper procedures may cause the PCM to become inoperative after
the upgrade and any claims associated with this repair may be subject to
chargeback. ~
*NOTICE
Do NOT attempt to perform a Manual Mode upgrade unless Auto Mode fails. Always
follow the instructions given on the GOS in either Auto or Manual mode. See table
for Manual Mode passwords.
*MANUAL MODE ECM UPGRADE PASSWORDS:
* Do NOT perform Manual Mode ECM upgrade unless Auto Mode fails.
Upgrade event #233 K900 (KH)
;
-
MY
MENU
K900 (KH) 15MY
KH 5.0GDI NAS AT: 95440-4EDBO
'
;,J
\'.', - -
:
PASSWORD
4040
1.
Within the ECM Upgrade screen, select Manual Mode in the left column, select Engine
and then select Upgrade Event 233. Select the appropriate control unit part number by
referring to the ROM ID Information Table on Page 3, and click OK.
2.
Enter the appropriate password from the table above, and click OK.
3.
Upgrade will begin and the progress of the upgrade will appear on the bar graph.
4.
Following the guidelines displayed on the screen during upgrade procedure, cycle the
ignition OFF ~ ON for ten (10) seconds.
5.
Check if any incidental Diagnostic Trouble Codes DTC(s) have been created by the
upgrade process; clear any DTC(s) that may be present.
6.
After the upgrade is complete, reset/relearn the TCM Adaptive Learning Values. The
procedure can be found at: KGIS > K900(KH) > 2015 > G 5.0 GDl-TAU > Automatic
Transmission System (A8TR 1-SBW).
7.
Confirm proper operation of the vehicle.
TSB: TRA 054 K900 (KH) September 2014
Page 6 of 6
-~J~~ LOGIC
IMPROVEMENT - TCM UPGRADE
AFFECTED VEHICLE PRODUCTION RANGE:
Model
MY
Production Date Range
K900 (KH)
2015
Produced prior to April 15, 2014
WARRANTY CLAIM INFORMATION:
c
Claim
Type
Causal P/N
Qty
N
Code
Code
w
95440 4EDBO
0
T73
ZZ5
Repair
Description
Labor Op
Code
Time
Related
Parts
Qty
(TRA 054)
TCM
Upgrade
95440F31
0.3
M/H
N/A
0
*NOTICE
For adaptive value reset operation, add Op Code 95440AOO (0.6 M/H) to the reflash
claim .
TSB: TRA 054 K900 (KH) September 2014
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-21 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 054
Replacement Service Bulletin Number:
MFR Communication Date: 2014-09-01
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM:SOFTWARE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- Stay Updated with Lifetime Access: This obd2 scanner includes lifetime free software updates for all app service functions. With a single payment, enjoy full access to diagnostics, reset tools, and maintenance features — zero subscription fees. A budget-friendly choice for weekend mechanics, home car owners, and DIYers, supporting vehicles from 1996 onward. Come to us with your VIN to check compatibility.
- Full Bidirectional Control/Active Tests & Stable Wireless Connectivity: This car code reader features full bidirectional control, allowing you to send commands to the vehicle's ECU for active tests on components such as fuel pumps, injectors, A/C clutches, windows, sunroofs, and more. This car scanner diagnostic tool helps DIYers quickly diagnose and test vehicle parts, cutting down troubleshooting and repair time. With BT 4.0 wireless connectivity, you can enjoy cable-free diagnostics up to 33 feet. Stand in your garage and test windows, wipers, or even engine components—all without needing to move around your car.
- Portable Car Scanner with 26 Special Functions: Scheduled vehicle maintenance with the A30M car diagnostic scanner can keep your vehicle in peak condition and save you big on dealership trips. The XTOOL A30M obd2 scanner diagnostic tool features essential reset and relearn functions, such as Oil Reset, EPB Reset (Electronic Parking Brake Release), SAS, ABS Brake Bleeding, Throttle Body Relearn, Injector Coding, Crank Sensor Relearn, Headlight Adjustment, and Tire Size Reset. Note: Service functions may vary by vehicle model – check compatibility beforehand!
- Wide Compatibility CAN FD & FCA
Autoauth: This obd2 scanner diagnostic tool is compatible with over 85+ car brands from the U.S., Europe, and Asia, providing extensive coverage through a BT connection with your smartphone or iPad. Now upgraded to support the latest protocols, it includes FCA AutoAuth access for Chrysler, Jeep, Dodge, and Fiat (2018+), and supports CAN FD for GM (2020+) models, giving you greater access to newer vehicles and systems. Note: The FCA AutoAuth account is not included with the device. Users must register and pay separately through the official FCA AutoAuth website to access diagnostic functions for vehicles that require it. - Up to 8 Live Data Streams Graphing – Real-Time Graphing for Deeper Insight: This car scanner supports up to 8 live data streams simultaneously with intuitive, real-time graphing. Gain comprehensive insights into your vehicle’s performance, making it easier to spot issues, detect trends, and make informed diagnostic decisions with confidence.
- Comprehensive OBD2 Scanner with 16 Resets: The XTOOL D5S car code reader and vehicle reset tool provides an advanced diagnostic solution with 16 commonly needed reset functions, including Electronic Parking Brake Reset (EPB Reset), SAS, BMS Reset (Battery Test), Throttle Body Relearn, TPMS Reset, ABS Bleeding, Injector Coding, Gearbox Match, Suspension Adjustment, Headlight, Window Initialization, Crank Sensor Relearn and more. Equipped with CAN FD Protocol and FAC AutoAuth, the D5S obd2 scanner diagnostic tool ensures compatibility with a broad range of modern vehicles, allowing users to address common maintenance needs quickly. NOTE: Please Check the Compatibility before ordering.
- 4 Main System Car Scanner & Full OBD2 Diagnostics: The XTOOL D5S car code reader is ideal for home mechanics, DIYers, and professionals, providing access to Transmission/Engine/ABS/SRS systems to read DTCs, Live data can be displayed in text or up to 4 PID data graphs, along with full OBD2 diagnostics to check the engine light on, other obd2 issues and routine maintenance. This car diagnostic scanner ensures you can keep your vehicles in top condition, avoiding costly repairs or unexpected breakdowns. NOTE: Some vehicles display three systems after connection because the transmission and engine of some vehicles are integrated into one.
- Check Engine Code Reader & Real-Time Engine Monitoring: Whether you're a car owner, a DIYer, or run a repair shop, the XTOOL D5S obd2 scanner diagnostic tool makes engine diagnostics fast and frustration-free, reading and explaining trouble codes in seconds—no confusion. Check live data like fuel trim, 02 sensor voltage, RPM, and coolant temp to pinpoint mis~fires, rough idle, or sensor issues. After repairs, simply use the D5S check engine code reader and reset tool to turn off the check engine light and confirm the problem’s fixed—saving time, money, and unnecessary shop visits. - Note: If the check engine light comes back on, it indicates the original problem still exists.
- Portable Car Scanner for ABS and SRS: XTOOL D5S gives you peace of mind when ABS or airbag warning lights come on. It reads and clears ABS codes to help you fix brake sensor, traction control, or wheel speed issues, and supports ABS bleeding after repairs like caliper or master cylinder replacement. For airbag systems, it scans and clears SRS codes related to airbags, seatbelt tensioners, and crash sensors. Whether you're doing repairs at home or running a small shop, the D5S is a cost-effective solution for safety diagnostics. Note: If a fault code returns after clearing, it usually means the issue hasn’t been fully resolved. Please check the compatibility before ordering.
- Transmission Warning Light ON? Here’s the Transmission Diagnostic and Reset Tool You Need: The XTOOL D5S is more than just a basic car scanner—it’s an easy-to-use transmission diagnostic tool. From rough shifts to slipping gears, the D5S lets you read and clear transmission trouble codes, monitor real-time TCM data, and perform transmission resets after fluid changes or repairs. Whether you’re a hands-on car owner or a pro running a busy shop, this OBD2 scanner with transmission functions helps you catch problems early—saving you time, money, and future headaches.. Note: Clearing fault codes is equivalent to a reset on some vehicles, but not all. For help, contact XTOOL Tech Support.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
- 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.