NHTSA ID Number: 10072865
Manufacturer Communication Number: SSM71360
TSB/Document Date: 2016-06-22
Summary
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
- 💝【Questions? We’re Here Anytime】MK808S is a...
- 🔥🔥🔥【2026 NEWLY RELEASED BI-DIRECTIONAL...
- 【28+ MOST POPULAR RESET SERVICE FOR 150 MAKES】Autel...
- 【ALL SYSTEM DIAGNOSTICS, FACTORY-LEVEL SCANNER】The...
- 【AUT0 SCAN & AUT0V1N, 10X FASTER】How much have you spent...
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
This product presentation was made with AAWP plugin.
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: SSM71360
Replacement Service Bulletin Number:
MFR Communication Date: 2014-05-28
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM:SOFTWARE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
TOPIx - SSM71360 - DA-Dongle/DA-VINA Update Instructions V2
Reference
SSM71360
Models
LR4 / L319
Page 1 of 8
LR2 / L359
LR3 / L319
Range Rover / L405
Range Rover Sport / L494
Defender / L316
Range Rover / L322
Range Rover Evoque / L538
Range Rover Sport / L320
Title
DA-Dongle/DA-VINA Update Instructions V2
Category
Diagnostic Software Hardware
Last modified
28-May-2014 00:00:00
Symptom
000101 Diagnostic Concerns
Content
Issue:
DA-Dongle/DA-VINA/DA-ST512 - J2534 Vehicle Communication Interface Device (VCI) software requires updating to the latest level.
DA J2534 software driver level – V4.0
(Must be updated to this level on all SDD machines that use this device)
DA App Hub level – V2.4.0
(Must be updated to this level on all SDD machines that use this device)
DA firmware level – V57.
(Only needs to be updated once to each device, because this is held on the device itself)
Action:
1. Check the software driver level (SECTION 1) of the DA J2534 VCI device.
If the software driver level is below V4.0, complete these instructions.
· Disconnect any VCI device from the SDD machine.
· Uninstall DA J2534 device software (SECTION 4).
· Install DA J2534 Device Setup V4.0 (SECTION 7).
2. Check the DA App Hub level (SECTION 2).
If the DA App Hub level is below V2.4.0, complete these instructions.
· Disconnect any VCI device from the SDD machine.
· Uninstall DA App Hub software (SECTION 5).
· Download DA AppHub_V2.4.0.zip. (SECTION 6).
· Install DA AppHub_V2.4.0.zip. (SECTION 8).
3. Check the DA firmware level (SECTION 3) of the DA J2534 VCI Device.
If the DA firmware level is below V57, complete these instructions.
· Complete Update DA firmware level (SECTION 9).
4. If the DA J2534 software driver level is at V4.0, the DA App Hub device software is at V2.4.0 and the DA firmware level is at V57, go to
– SDD Device Recognition and Final checks (SECTION 10).
SECTION 1:
Check the Software Driver level
Windows 7
1. Press the Windows Key .
2. Select Control Panel.
http://topix.landrover.jlrint.com/topix/service/archive/479223/index
6/3/2014
TOPIx - SSM71360 - DA-Dongle/DA-VINA Update Instructions V2
Page 2 of 8
3. Select Programs.
4. Select Programs and Features.
5. The Programs and Features control panel displays a list of software on your computer.
6. Look in the list for – ‘DA J2534 Software’.
7. Select ‘DA J2534 Software’.
8. Look in the title column ‘Version’ for the software driver level.
9. If this is lower than V4.0 – complete Steps 8 to 14 of ‘SECTION 4’ (Windows 7).
10. If this is V4.0 – go to – ‘SECTION 2’.
Windows XP
1. Press the Windows Key .
2. Select Control Panel.
3. Select Add or Remove Programs.
4. The Add or Remove Programs control panel displays a list of software on your computer.
5. Look in the list for – ‘DA J2534 Software’.
6. Select ‘DA J2534 Software’.
7. Click on ‘Click here for support information’.
8. This will pop up an information box stating the software Version level.
9. If this is lower than V4.0 - complete Steps 7 to 13 of ‘SECTION 4’ (Windows XP).
10. If this is V4.0 – go to – ‘SECTION 2’.
SECTION 2:
Check the DA App Hub level
Windows 7
1. Press the Windows Key .
2. Select Control Panel.
3. Select Programs.
4. Select Programs and Features.
5. The Programs and Features control panel displays a list of software on your computer.
6. Look in the list for – ‘DA App Hub’.
7. Look in the title column ‘Version’ for the software driver level.
8. If this is lower than V2.4.0-complete Steps 8 to 14 of – ‘SECTION 5’ (Windows 7).
9. If this is V2.4.0 – go to – ‘SECTION 3’.
Windows XP
1. Press the Windows Key .
2. Select Control Panel.
3. Select Add or Remove Programs.
4. The Add or Remove Programs control panel displays a list of software on your computer.
5. Look in the list for – ‘DA App Hub’.
6. Select ‘DA App Hub’.
7. Click on ‘Click here for support information’.
8. This will pop up an information box stating the software Version level.
9. If this is lower than V2.4.0 - complete Steps 7 to 13 of – ‘‘SECTION 5’.
10. If this is V2.4.0 – go to – ‘SECTION 3’.
SECTION 3:
http://topix.landrover.jlrint.com/topix/service/archive/479223/index
6/3/2014
TOPIx - SSM71360 - DA-Dongle/DA-VINA Update Instructions V2
Page 3 of 8
Check the DA firmware level
Windows XP and Windows 7 – (DA Dongle & DA Davina)
1. Connect the DA VCI Device to the SDD machine.
2. Press the Windows Key .
3. Select All Programs.
4. Select Diagnostic Associates Ltd.
5. Select DA App Hub.
6. DA App Hub V2.4.0 pop up window will appear.
7. Click ‘Update Applications’.
8. Message on screen will show if update required.
9. If the software level is at V57 then close window and go to -‘SECTION 10’.
10. If the software level below V57 – go to – ‘SECTION 9’.
Windows XP and Windows 7 – (DA ST512)
1. Connect the DA J2534 VCI Device to the SDD machine. (Do not connect to a vehicle)
2. Press the Windows Key .
3. Select All Programs.
4. Select Diagnostic Associates Ltd.
5. Select DA App Hub.
6. A pop up window will be displayed ‘DA App Hub’
7. Click ‘OK’.
8. Click ‘Update Applications’.
9. Click ‘Advanced’ – on the right hand side of the DA App Hub.
10. A new screen will be displayed.
11. ‘Available Software Applications’ & ‘Installed Software Applications’
12. Use the scroll bar in the ‘Installed Software Applications’ box to help select ‘J2534 [DA-ST512] V57’
13. If the software level is at V57 then close window and go to -‘SECTION 10’.
14. If the software level below V57 – go to – ‘SECTION 9’.
SECTION 4:
Uninstall Programs - DA J2534 device Software.
Windows 7
1. Disconnect the VCI device from the SDD machine.
2. Press the Windows Key .
3. Select Control Panel.
4. Select Programs.
5. Select Programs and Features.
6. The Programs and Features control panel displays a list of software on your computer.
7. Select ‘DA J2534 Software’.
8. Click the ‘Uninstall’ button. (This will now be displayed at the top of the programs list above – ‘Name’).
9. A Programs and Features message box will be displayed.
10. Click ‘Yes’.
11. Complete the on screen instructions.
12. Close the Programs and Features control panel.
13. Restart SDD Machine.
http://topix.landrover.jlrint.com/topix/service/archive/479223/index
6/3/2014
TOPIx - SSM71360 - DA-Dongle/DA-VINA Update Instructions V2
Page 4 of 8
14. Go to – ‘SECTION 7’.
Windows XP
1. Disconnect Vehicle Communication Device (VCI) from SDD machine.
2. Press the Windows Key .
3. Select Control Panel.
4. Select the Add/Remove Programs control panel.
5. The Add/Remove control panel displays a list of software on your computer.
6. Select ‘DA J2534 Software’.
7. Click the ‘Remove’ button.
8. Add and remove programs message box will be displayed.
9. Click ‘Yes’.
10. Complete the on screen instructions.
11. Close the Add/Remove Programs control panel.
12. Restart SDD Machine.
13. Go to - ‘SECTION 7’.
SECTION 5:
Uninstall Programs - DA App Hub software
Windows 7
1. Disconnect the VCI device from the SDD machine.
2. Press the Windows Key .
3. Select Control Panel.
4. Select Programs.
5. Select Programs and Features.
6. The Programs and Features control panel displays a list of software on your computer.
7. Select ‘DA App Hub’.
8. Click the ‘Uninstall’ button. (This will now be displayed at the top of the programs list above – ‘Name’).
9. A Programs and Features message box will be displayed.
10. Click ‘Yes’.
11. You will now see the ‘DA App Hub’is not listed in the Programs and Features control panel list.
12. Close the Programs and Features control panel.
13. Restart SDD Machine.
14. Go to - ‘SECTION 6’.
Windows XP
1. Disconnect Vehicle Communication Device (VCI) from SDD machine.
2. Press the Windows Key .
3. Select Control Panel.
4. Select the Add/Remove Programs control panel.
5. The Add/Remove control panel displays a list of software on your computer.
6. Select ‘DA App Hub’.
7. Click the ‘Remove’ button.
8. Add and remove programs message box will be displayed.
9. Click ‘Yes’.
10. You will now see the ‘DA App Hub’is not listed in the Add/Remove control panel list.
http://topix.landrover.jlrint.com/topix/service/archive/479223/index
6/3/2014
TOPIx - SSM71360 - DA-Dongle/DA-VINA Update Instructions V2
Page 5 of 8
11. Close the Add/Remove Programs control panel.
12. Restart SDD Machine.
13. Go to - ‘SECTION 6’.
SECTION 6:
Download DA AppHub_V2.4.0.zip
Windows XP and Windows 7
1. Press the Windows Key ..
2. Select ‘All Programs’.
3. Select ‘Internet Explorer’ & ‘Click’ to launch it.
4. Type in the address bar at the top of the screen - ‘http: //www.diagnostic-associates.com/download.htm’.
5. Click the appropriate Language ‘Download’ link at the bottom of the DA App Hub Setup section.
6. A Pop up box will be displayed – ‘File Download’.
7. Click ‘Save’.
8. A Pop up box will be displayed –‘Save As’
9. Select ‘Desktop’.
10. Click ‘Save’ to save filename ‘DAAppHub_V2.4.0.zip’ onto your SDD Desktop.
11. Once the Download is Complete.
12. Click ‘Close’.
13. Go to ‘SECTION 8’.
SECTION 7:
Install DA J2534 Device Setup V4.0.
Windows XP and Windows 7
1. Disconnect the VCI from SDD machine.
2. Press the Windows Key .
3. Select All Programs.
4. Select JLR.
5. Select SDD.
6. Select VCI Device Drivers.
7. Select ‘DA Dongle & Davina’.
8. A Pop up box will be displayed - ‘Welcome to the DA J5234 software setup wizard’.
9. Click ‘Next’.
10. Click ‘Next’.
11. Click ‘Next’.
12. A Pop up window will be displayed ’Installation Complete’.
13. Click ‘Close’ on the ‘Installation Complete’ window.
14. Restart your SDD machine.
15. Go to – ‘SECTION 2’.
SECTION 8:
Install DA AppHub_V2.4.0.zip
Windows 7
1. Press the Windows Key
and the ‘D’ at the same time.
2. (This will now display the SDD desktop).
3. Double click ‘DAAppHub_V2.4.0.zip’.
http://topix.landrover.jlrint.com/topix/service/archive/479223/index
6/3/2014
TOPIx - SSM71360 - DA-Dongle/DA-VINA Update Instructions V2
Page 6 of 8
4. Double click ‘DAAppHubSetup’. (Now visible inside the zip).
5. A Pop up window will be displayed – ‘Welcome to DA App Hub Setup Wizard’.
6. Click ‘Next’.
7. A Pop up window will be displayed – ‘Select Installation folder’.
8. Select ‘Everyone’.
9. Click ‘Next’
10. A Pop up window will be displayed – ‘Confirm Installation’.
11. Click ‘Next’.
12. A Pop up window will be displayed – ‘Installation Complete’.
13. Click ‘Close’.
14. Close the all open windows.
15. Restart your SDD machine to complete the install.
16. Go to – ‘SECTION 3’.
Windows XP
1. Press the Windows Key and the ‘D’ at the same time.
2. (This will now display the SDD desktop).
3. Double click ‘DAAppHub_V2.4.0.zip’.
4. Double click ‘DAAppHubSetup’. (Now visible inside the zip).
5. A Pop up window will be displayed – ‘File Download Security Warning’.
6. Click ‘Run’.
7. A Pop up window will be displayed – ‘Welcome to DA App Hub Setup Wizard’.
8. Click ‘Next’.
9. A Pop up window will be displayed – ‘Select Installation folder’.
10. Select ‘Everyone’.
11. Click ‘Next’
12. A Pop up window will be displayed – ‘Confirm Installation’.
13. Click ‘Next’.
14. A Pop up window will be displayed – ‘Installation Complete’.
15. Click ‘Close’.
16. Close the all open windows.
17. Restart your SDD machine to complete the install.
18. Go to – ‘SECTION 3’.
SECTION 9:
Update DA firmware level
DA Dongle & DA Davina - Windows XP and Windows 7
1. Connect the DA J2534 VCI Device to the SDD machine. (Do not connect to a vehicle)
2. Press the Windows Key .
3. Select All Programs.
4. Select Diagnostic Associates Ltd.
5. Select DA App Hub.
6. A pop up window will be displayed ‘DA App Hub’
7. Click ‘OK’.
8. DA App Hub V2.4.0 pop up window will be displayed.
http://topix.landrover.jlrint.com/topix/service/archive/479223/index
6/3/2014
TOPIx - SSM71360 - DA-Dongle/DA-VINA Update Instructions V2
Page 7 of 8
9. Click ‘Update Applications’.
10. Message on screen will show if update required.
11. Click ‘Update Device’.
12. Allow software update process to complete
13. Once complete, message ‘Your J2534 software is up to date’ will be displayed.
14. Close the pop up window.
15. Go to - ‘SECTION 10’.
DA ST512 - Windows XP and Windows 7
15. Connect the DA J2534 VCI Device to the SDD machine. (Do not connect to a vehicle)
16. Press the Windows Key .
17. Select All Programs.
18. Select Diagnostic Associates Ltd.
19. Select DA App Hub.
20. A pop up window will be displayed ‘DA App Hub’
21. Click ‘OK’.
22. Click ‘Update Applications’.
23. Click ‘Advanced’ – on the right hand side of the DA App Hub.
24. A new screen will be displayed.
25. ‘Available Software Applications’ & ‘Installed Software Applications’
26. Use the scroll bar in the ‘Installed Software Applications’ box to help select ‘J2534 [DA-ST512] V##’
27. Select J2534 [DA-ST512] V##’
28. Click on the ‘Left Arrow’ (This will uninstall the current Firmware).
29. Click on ‘Update Device’. (Wait until this is complete).
30. Click ‘Update Applications’.
31. Click ‘Advanced’ – on the right hand side of the DA App Hub.
32. Use the scroll bar in ‘Available Software Applications’ box to select ‘J2534 [DA-ST512]’
33. Use the ‘Version Dropdown’ box to select the correct version. V57.
34. Click on the ‘Right Arrow’.
35. Click on ‘Update Device’. (Wait until this is complete).
36. Close the DA App Hub.
37. Go to - ‘SECTION 10’.
SECTION 10:
SDD Device Recognition and Final checks.
With the latest version of SDD you will need to follow a specific process to get SDD to recognise the DA-Dongle/DAVINA/ST512 for the first time:
1. Disconnect the VCI device from the SDD machine.
2. Shut down the SDD machine.
3. Connect the DA J2534 Device to the vehicle.
4. Connect the DA J2534 Device to your SDD machine with the USB cable.
5. Power up your SDD machine.
6. Start the SDD application.
7. Login to SDD.
8. Select ‘Continue’ from the displayed ‘Warning Page’.
http://topix.landrover.jlrint.com/topix/service/archive/479223/index
6/3/2014
TOPIx - SSM71360 - DA-Dongle/DA-VINA Update Instructions V2
Page 8 of 8
9. Select ‘Manual VIN Read’.
10. Select ‘Settings’ tab.
11. Select ‘System Information’ tab.
12. Select ‘Details’ next to ‘Vehicle Communications Interface Status’.
13. Click ‘Connected’ next to ‘DA-Dongle or DAVINA2’.
14. Make sure the information stated in the screen now displays:
· DA-Dongle or DAVINA2
· DLL Version: 2.56
· Firmware Version: 57.0#
15. If confirmed as correct – click ‘Close’. – Use SDD as normal.
16. If confirmed incorrect – go to – ‘SECTION 4’.
http://topix.landrover.jlrint.com/topix/service/archive/479223/index
6/3/2014
- WHY CHOOSE THE 2025 CR MAX -Upgrade the latest diagnostic capabilities for all vehicles after 1996: upgrade to 49+maintenance services; 46 extra specific functions; real all systems/all control modules diagnose; over 40K+ bidirectional actuation tests for diagnosing all control moduels of cars; Powerful full OBD2 Functions; built-in ECU Coding for BMW
/ Audi/ VW/ RollsRoyce; Fr ee V.A.G Guide Function; Battery retistration for new battery adaptation and more. It covers all vehicle diagnostic services and some special professional vehicle maintenance servces, assists you to do home DIY vehicle maintenance or car repair as a pro technician. - NEWEST IN INNOVATION FULL OBD2 SERVICES- iCarsoft auto car diagnostic scanner compatible with CAN-FD, CR MAX can do it all-reads and clears trouble codes, ALL SYSTEM DIAGNOSIS such as engine, transmission, ABS and airbag etc. CR MAX code reader for all cars can perform I/M Readiness, Live Data, Freeze Frame, Vehicle Information, Monitor Test, On-Board Monitor, E vap System Test,O2 Sensor Test,DTC Library Lookup,etc. (Warm Tips: If you car is after 2023,please contact us for compatibility; 3. It comes with 16PIN OBD2 diagnostic adapter, please check your car diagnostic socket if it is 16pin socket, if your car is 14pin diagnostic socket please contact us for the solution.)
- 49 RESET+ 46 SERVICES- Performs: Oil Reset, EPB,SAS,Throttle, D-P - F, Battery, ABS, Injector, TPMS, Suspension, AC, Head Lamp, Body Stablity, Engine, Tramsmission, Airbag, Seat, Door-Win-Roof, Fuel Pump, Door, E-G- R.+21 NEWEST SERVICES( Need update scanner)-AdBlue, Clutch, Crankshaft, High Voltage Battery, Cruise Control, NO xSensor, Rain Sensor, Stop And Start, Turbocharger, Head Up Display, Radar Camera, Vehicle Setup, Cyliner Misfire Check,Speedlimitassist, ControlUnitReset,OxygenSensor, Seatbelt. Extra 46+ extra services based on car brand.(Tips: Quantity of reset/ calibration fucitons are based on car system that your vehicle model has)
- REVOLUTIONARY 40000+BIDIRECTIONAL ACTIVE TESTS: Upgraded CR Max scanner equip with numberous of actuational test items for covering all available vehicle control modules, no longer only do simple light test or window test like other scanners, performs hardware modules test and software control modules test for checking car units or new updated control moduels work well or not after maintenance/ repair/ re-installation/ control system updated (Example for Benz- Roller Sun Blind test; Backup Camera test ;Self-test; EPB test; Transport Mode test;Boost Pressure Positioner test; Fuel Pump test; AND MORE!!).(Warm tip: The available test items are based on control modules your car has)
- ECU CODING+ BATTERY REGISTRATION- Powerful ECU Coding service for BMW/MINI/RollsRoyce / Audi/VW/Seat/Skoda/Bentley/Bugatti/Lamborghini, Improves Engine Power Performance and Optimizes Fuel Efficiency and Match New Hardware Unit to car and Customized a comfortable Driving Modes and Fixes & Updates Original Software Bug. The battery test function for checking car battery health, perform battery reset (BMS ) for replacing a damaged or aging car battery with a new one and register new battery to car ECU
/ 
- Scanner POR V2.0 with all obd2 services
- Do the scanning for engine
- Support OBDII/EOBD Ten Modes of Operation
- 【Designed for Most Mercedes-Benz, Sprinter and Smart from 1996-2023】As every car model of Benz has its-owned specific car system and ECUs, not all models are equipped with a complete vehicle ECU, which may cause the scanner to be unable to perform all listed reset services on some models, or even completely incompatible. Like For Sprinter's newer models, it support diagnostic functions only, lacking support for specialized service functions.. So please tell us the car's VIN and required service before purchase for compatibility check. You may also refer to the instructions in the eighth image of the main product photos to perform your inquiry.
- 【Up to 38 Reset Services】MB V3.0 2026 Version diagnostic tool performs Up to 38 maintenance services - Oil Rest , SAS, EPB, ETC, D-P-F, TPMS, ABS, Suspension, Air Conditioner, Head Lamp, Body Stability, Engine Control, Seat, Fuel Pump, Air-Filter, Engine Idle, Door, Im-mo-bilizer, Injector Coding, Transmission Control, Miscellaneous, Adblue, BMS, Cluth, Water Pump, NOxSensor, Rain/Light Sensor, Start/Stop, Radar/Camera, Cylinder Shutoff Test, Speed Limit Assist, Control Unit Reset, Oxygen Sensor, Seat Belt, Cruise Control System, Turbocharger, Crankshaft, Language Setting and etc. (Tips: Please update the software after receiving the product to obtain new service functions)
- 【OE-Level All System OBD2 Scanner】iCarsoft MB V3.0 (2026 Version) diagnostic scanner offers comprehensive OBDII services, allowing you to quickly scan all systems, including the Engine, ABS, SAS, SRS, TPMS, TCM, Fuel Pump System, ESP, EPB, EPS, Suspension, SCM, Adaptive Systems, and more. It supports functions such as reading and erasing codes, checking I/M readiness, viewing freeze frame data, performing O2 sensor tests, conducting on-board monitoring, testing the evap system, auto VIN retrieval, and reading both generic and specific codes, as well as DTCs and battery tests.
- 【Bidirectional Scan Tool】iCarsoft MB V3.0 (2026 Version) Bidirectional scanner supports activate or control a vehicle system or component, allows commanding cars’ modules and receiving info from the ECU to perform active tests on individual components, including EVAP/ABS Motor Pump/Windows/Sunroof and more, to pinpoint fault causes & resolve issues,and allows you to re-learn certain components after making repairs or replacement.
- 【Real Time Record & Graph View】iCarsoft MB V3.0 (2026 Version) can automatically record vehicle text history and identify vehicle information. Preserve real-time data information. View & Graph Live Data. Support Data Review and Print. Multi-language: English, German, Dutch, Spanish, French and so on. We promise to offer Lifetime updates (Lifetime free Update via PC), and confidence in products. We also provide 1 year warranty + extra lifetime hardware free repair if you need it in the future. We prioritize user experience & strive to meet your expectations. Please do feel free to reach out to us if you have any question or problem about the usage, our tech team will service you in time.
This product presentation was made with AAWP plugin.
Last update on 2026-05-12 / Affiliate links / Images from Amazon Product Advertising API