NHTSA ID Number: 10071395
Manufacturer Communication Number: VVT-14-05
TSB/Document Date: 2016-06-17
Summary
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
2. Slide the battery pack
into the compartment until it connects firmly with the contacts -arrow-:
3. Close battery compartment cover and re-secure the battery compartment cover/lock.
Caution!
Ensure battery compartment cover is locked at all times. Otherwise, the battery pack may fall out
during use or transport.
Note
For optimum battery performance and service life, please heed the battery charging and recalibration
instruction documents included with the Panasonic program suite. After 6160A set up, locate the
documents as follows:
1. From the Windows desktop, go to Windows (Start) > All Programs > Panasonic > Online
Manuals
2. Select Important Tips or Reference Manual
7.0 – Connecting to Power
The tablet is connected to power either via the docking station (port replicator) connection to the A/C
power adapter, directly via the A/C power adapter or run from the internal rechargeable battery pack.
Caution!
•
•
•
The A/C power adapter includes a country-specific power cable (UL-approved or CSA-approved,
oil-resistant power cord).
Operation on ungrounded or impedance-grounded electrical networks (IT electrical networks) is
prohibited.
Use only the original Panasonic CF-D1 power adapter. For additional information (part number
etc.), refer to the CF-D1 Operating Manual.
Page 7 of 17
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
8.0 – Initial Start and Windows® Setup
8.1 – Preparation
Initial startup must be performed with the tablet removed from the docking station (port replicator) and
the wireless switch in the OFF position. Additional information can be found in the Panasonic CF-D1
Operating Manual.
1. On the upper left-hand side of the tablet, open the access cover marked “SC / EX”. If necessary, slide
the wireless operation switch to the OFF position -arrow-:
2. Connect the A/C power adapter cable to a 115V A/C outlet and the DC IN 15.6V port -arrow- on the
lower right-hand side of the tablet:
8.2 – Interface Connections
For additional information on interface connections, refer to the Panasonic CF-D1 and docking station (port
replicator) Operating Manuals.
8.3 – Switching the Unit On and Off
Switch on the tablet by pressing the on/off button on the front of the tablet for approximately 1 second. The
tablet boots up and the Windows user interface appears.
Caution!
•
When switching the tablet off after normal use, DO NOT press and hold the on/off button for
longer than 5 seconds! This executes a forced shutdown which may result in hard drive faults.
•
To switch off the tablet after normal use, click the Windows “Start” symbol from the desktop and
then select “Shut down”.
Page 8 of 17
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
8.4 – Windows® 7 Professional - Initial Setup
After the initial Windows setup screens are displayed…
1. Carefully scroll down and select My language is English:
2. Confirm the regional settings and click Next:
Continued …10/
Page 9 of 17
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
3. Accept the license conditions by checking the appropriate boxes and click Next:
4. Set the Time Zone, Daylight Saving Time, Date and Time as applicable to your location and click
Next.
5. If a Wireless Network configuration prompt appears, select Skip.
Various settings are saved and the device automatically reboots to the Windows desktop.
6. When the desktop reappears, perform all additional setup and diagnostic software installation steps in
order, as specified in Sections 8.5 through 11.0.
Have the additional Service Information documents specified in Section 1.0 on hand.
Continued …11/
Page 10 of 17
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
8.5 – Docking Station (port replicator) Connection
The tablet can now be placed in the docking station (port replicator) if desired.
The connector array for the docking station on new VAS 6150A tablets is covered to prevent damage
during shipping and initial handling.
Prior to parking the tablet in the docking station for the first time, slide protective cover -1- upwards -arrowto expose the connector array:
1
We also recommend connecting a USB mouse and keyboard at this time.
Caution!
Whenever the tablet is separated from the base station (port replicator) for extended periods, we
recommend closing the connector array cover to prevent damage.
Continued… 12/
Page 11 of 17
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
8.5 – Delete Non-Applicable Information
Note
The Windows desktop on new devices includes two documents containing information that is not
applicable to the -US/CDN- market. Please delete these documents as instructed below.
1. From the Windows desktop, locate two document shortcut icons entitled:
HowTo Guide_ODIS Service Set-Up_EN and HowTo Guide_ODIS Service Set-Up_DE:
2. Right click each shortcut icon and select Delete from the dropdown (one after the other).
3. When prompted to confirm file delete, click Yes.
4. From the Windows desktop, locate and open the Manuals folder:
5. Delete the OffboardDiagService folder:
Continued …13/
Page 12 of 17
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
9.0 – Network Configuration & Netviewer
9.1 – Set Computer Name
Notes
•
•
•
If more than one VAS diagnostic console, tablet or laptop device is connected to the dealership
network, each device must use a different computer name.
While various computer naming methods may be used, each must ensure that the computer
names for all individual devices on the network are different.
The computer name must be determined and set before using any vehicle diagnostic software
functions that utilize the dealership network connection to the Internet.
For a suggested method to build, set and validate computer names, refer to Service Information – VAS
Tester document title: VAS Diagnostic Device Computer Name Builder
9.2 – Network Configuration
For dealership networks using DHCP for Internet access, no configuration is necessary (default setting is
DHCP). Proceed with Netviewer installation below.
For dealership networks using Static IP configurations for Internet access, the necessary configurations
must be performed before continuing with these instructions. Ask your dealership systems administrator or
IT professional for details and assistance.
If the device is to be used over a wireless LAN connection, the necessary configuration should be
performed at this time.
9.3 – Download and Install Netviewer Software
Note
Netviewer telediagnosis software enables VWGoA support personnel to access your device
remotely during support call consultation. When necessary, consultants will instruct you to start the
Netviewer application, and they will provide a session number to start a remote diagnosis session.
Prerequisite:
Diagnostic device is able to connect to internet in order to logon to ServiceNet (DHCP, or static IPs
enabled as per Section 9.2).
1. Connect network/Ethernet cable to diagnostic device.
2. Launch Internet Explorer and logon to ServiceNet.
3. Navigate to the Workshop Equipment > VAS Tester > Software section.
4. Right click / select the link: Netviewer one2one – Telediagnosis Software.
5. Save file to Windows desktop.
Continued… 14/
Page 13 of 17
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
9.4 – Windows 7 Restart Configuration with Network Connection
Note
Prior to installing ODIS Service, a number of additional Windows files must be configured via
a network connection. This takes place via a restart with a network connection.
Failure to perform the steps below will result in an “Insufficient memory…” error during ODIS
Service installation.
Prerequisite:
Diagnostic device is able to connect to internet. Ethernet cable connected or wireless LAN enabled.
1. From the Windows desktop, select Windows (Start) > Restart
2. Wait while various Windows files are configured prior to shut down and during restart.
Allow 15 – 20 minutes for this additional configuration (device and network bandwidth dependent).
9.5 – Additional Information
Before proceeding to use the VAS 6160C, please read the "Panasonic CF-53 Series Operating
Manual", containing additional important information regarding the unit, its accessories and its care.
Note
If users are not familiar with Windows 7 features, navigation and functions, we recommend reading
the various information resources included with the software: From the Windows desktop go to
Windows Start > Getting Started > Discover Windows 7 …as well as the additional topics listed.
Continued…/15
Page 14 of 17
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
10.0 – Install Offboard Diagnostic Information System Service (ODIS Service)
10.1 – General Information
Dealerships are responsible for requesting an ODIS Service license, and then installing and configuring
the latest “installation version” of ODIS Service available.
A security certificate to enable vehicle Software Version Management (SVM) and module adaptations must
also be requested and installed.
For detailed instructions, refer to Service Information - ODIS Service document titles (in order of use):
•
ODIS Service Installation Phase 1 - Preparation and License Request Instructions (eShop)
•
ODIS Service Installation Phase 2 - Software Installation & Configuration Instructions
•
ODIS Service Installation Phase 3 - Security Certificate Request & Installation Instructions
Note
Before proceeding to Section 11.0, prepare the laptop, request the license, install and configure
the latest version of ODIS Service etc. in phase order, exactly as instructed in the three Service
Information document titles specified above!
11.0 – VAS 5054A Transmitter Head Setup
11.1 – General information
The VAS 6160A is equipped with a Bluetooth® (wireless) interface for operation of the supplied VAS
5054A Transmitter Head:
The VAS 5054A is powered by the vehicle Data Link Connector (DLC) when connected, and
communicates with the tablet and the diagnostic software via Bluetooth (wireless) mode or supplied
USB cable via USB mode.
Continued… 16/
Page 15 of 17
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
11.2 – Bluetooth & EDIC Configuration
Bluetooth (wireless) operation is possible only with the tablet wireless operation switch in the ON
position.
Visible confirmation of wireless operation is via the wireless operation indicator on the LED array on
the front lower panel adjacent to the tablet On-Off switch.
Prior to first use of the VAS 5054A and ODIS Service in Bluetooth (wireless) mode, the VAS
5054A must be configured to the Bluetooth and EDIC software on the tablet.
ODIS Service must be installed before Bluetooth and EDIC software configuration. For detailed
instructions refer to Service Information - VAS Tester document title: VAS 5054A Transmitter Head –
Bluetooth & EDIC Configuration – ODIS Service Only.
11.3 – VAS 5054A USB (cabled) Operation
If the tablet is used to perform Software Version Management (SVM) flash procedures or ant-theft
immobilizer adaptations, a USB (cabled) connection must be used between the VAS 5054A
transmitter head and the tablet. This ensures an uninterrupted data stream.
Prior to first use with a USB cable, the tablet and transmitter head must be configured for USB
(cabled) operation. For detailed instructions refer to Service Information – VAS Tester document title:
VAS 5054A Transmitter Head - USB Configuration – ODIS Service Only
Notes
•
For USB (cabled) connection of VAS 6160A to VAS 5054A, the supplied USB cable is of the
Rugged USB 2.0 type. A circular, secure (locked) connection is used.
•
On the lower right-hand side of the tablet, open the cover for the Rugged USB 2.0 port and
connect by lining up the two dots and inserting the connection straight into the port -arrow 1-:
•
To disconnect, release the connector lock -A- by sliding the locking collar away from the tablet
-arrow 2-:
A
1
2
Page 16 of 17
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
12.0 – Warranty Registration
A formal warranty registration process for new tablet for warranty coverage is no longer necessary.
The device serial number was automatically registered with the US/CDN market service provider for
warrantable repairs at the time of purchase.
In case of warranty repair requests, please provide the serial number of the device to the VWGoA DTSS
consultant at the toll-free number listed below.
13.0 – Malfunctions and Support
All VAS 6160A are tested before leaving the factory. Selected components and numerous quality
control inspections ensure high reliability of your new diagnostic tablet.
Should performance or functional issues occur after placing the device into service, please attempt to
identify and localize as accurately as possible. Try to determine if the symptom is a result of the
Panasonic CF-D1 tablet hardware, Windows operating system, ODIS Service software or dealership
network (for internet connectivity). Then proceed as follows:
•
For tablet hardware and operating system issues, consult the information in the
"Troubleshooting" chapter in the Panasonic CF-D1 Operating Manual.
Also review the latest VAS Tester FAQs and Service Information document topics in the
Workshop Equipment – VAS Tester section of ServiceNet. The issue may be previously known
and a resolution already published.
•
For ODIS Service software functional issues, review the latest ODIS Service FAQs and
Service Information document topics in the Workshop Equipment – ODIS Service section of
ServiceNet. The issue may be previously known and a resolution already published.
•
If it is not possible to resolve the issue with the aid of the Panasonic CF-D1 Operating Manual or
ServiceNet documents, contact:
VWGoA DTSS: 1-888-896-1298.
Page 17 of 17
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: VVT-14-05
Replacement Service Bulletin Number:
MFR Communication Date: 2014-01-29
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.