NHTSA ID Number: 10071392
Manufacturer Communication Number: VVT-14-02
TSB/Document Date: 2016-06-17
Summary
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
docking station
4
Service Manager cover letter2
1
2
5
With “Rugged USB 2.0 secure laptop connection.
Not shown.
6.0 - Install Rechargeable Battery Pack
Caution!
When handling the rechargeable battery:
• The rechargeable battery should be replaced only by properly trained personnel.
• Never short-circuit the rechargeable battery.
• Never throw the rechargeable battery into a fire.
• Dispose of/recycle the battery only when discharged and in accordance with local regulations.
Remove battery from its packaging and install as follows:
1. Turn the laptop over and press the “Push” mark on the battery compartment cover, then slide and
remove cover -arrow-:
Page 6 of 15
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
2. Slide the battery pack into the compartment until it connects firmly with the contacts -arrow-, then
replace the battery compartment cover:
Caution!
Ensure battery compartment cover snaps into place. Otherwise, the battery pack may fall out during
transport.
Note
For optimum battery performance and service life, please heed the battery charging and recalibration
instruction documents included with the Panasonic program suite. After 6160C set up is completed
and the diagnostic software is installed /configured etc., locate the documents as follows:
1. From the Windows desktop, go to Start > Programs (ALL Programs) Panasonic > Battery
2. Select Battery Recalibration or Important Tips
7.0 – Connecting to Power
The laptop is connected to power either via the docking station (port replicator) connection to the A/C
power adapter, directly via the A/C power adapter or run from the internal rechargeable battery pack.
Caution!
•
•
•
The A/C power adapter includes a country-specific power cable (UL-approved or CSA-approved,
oil-resistant power cord).
Operation on ungrounded or impedance-grounded electrical networks (IT electrical networks) is
prohibited.
Use only the original Panasonic CF-53 power adapter. For additional information (part number
etc.), refer to the CF-53 Operating Manual.
Page 7 of 15
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
8.0 – Initial Start and Windows® Setup
8.1 – Preparation
Initial startup must be performed with the laptop removed from the docking station (port replicator)
and the wireless switch in the OFF position. Additional information can be found in the Panasonic CF-53
Operating Manual.
1. Open the access cover located to the right of the rechargeable battery cover and confirm the laptop
wireless operation switch is in the OFF position -arrow-:
2. Connect the A/C power adapter cable to a 115V A/C outlet and the DC IN 15.6V port -arrow- on the
right side of the laptop:
8.2 - Interface Connections
For additional information, on interface connections, refer to the Panasonic CF-53 and docking station
(port replicator) Operating Manuals.
8.3 - Switching the Unit On and Off
Switch on the laptop by pressing the on/off button for approximately 1 second. The laptop boots up and the
initial Windows Welcome screen appears.
Caution!
•
When switching the tablet off after normal use, DO NOT press and hold the on/off button for
longer than 5 seconds! This executes a forced shutdown which may result in hard drive faults.
•
To switch off the laptop after normal use, click the Windows “Start” symbol from the desktop and
then select “Turn Off Computer” and “Turn Off” (Windows XP) or “Shut down” (Windows 7).
Page 8 of 15
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
8.4 – Windows - Initial Setup
After the initial Windows setup screens are displayed…
1. Set the Date, local Time, Time Zone and Daylight Savings settings as applicable to your location and
click Next: (Windows XP setup screen illustrated below. Windows 7 setup screen is similar).
The system saves the settings and then automatically reboots to the Windows desktop.
All settings performed here can be changed at any time through Windows Control Panel.
8.5 – Delete Non-Applicable Documentation
Note
The Windows desktop on new devices includes two documents containing information that is not
applicable to the -US/CDN- market. Please delete these documents as instructed below.
1. From the Windows desktop, locate two Adobe Acrobat document icons entitled:
HowTo Guide_ODIS Service Set-Up_EN and HowTo Guide_ODIS Service Set-Up_DE:
2. Right click each icon and select Delete from the dropdown.
3. When prompted to confirm file delete, click Yes.
Continued …10/
Page 9 of 15
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
9.0 – Network Configuration & Netviewer
9.1 – Set Computer Name
Notes
•
•
•
If more than one VAS diagnostic console, tablet or laptop device is connected to the dealership
network, each device must use a different computer name.
While various computer naming methods may be used, each must ensure that the computer
names for all individual devices on the network are different.
The computer name must be determined and set before using any vehicle diagnostic software
functions that utilize the dealership network connection to the Internet.
We recommend the computer name be set before proceeding with the remaining setup.
For a suggested method to build, set and validate computer names, refer to Service Information – VAS
Tester document title: VAS Diagnostic Device Computer Name Builder
9.2 – Configure Static IP Addresses
This section applies ONLY to VAS diagnostic devices used in dealership networks using static IP
addresses (the laptop is set to DHCP by default).
If your dealership network is configured using DHCP, proceed to Section 9.3 - Download and Install
Netviewer Software - Page 10.
We recommend that you ask your dealership systems administrator or IT professional for assistance with
this step if you are unfamiliar with the process, or call the VWGoA IT Service Desk at: 866-892-3375.
9.2.1 – Static IP Configuration – Windows XP
1. From the Windows desktop, click Start > Control Panel > Network Connections.
2. From the Network Connections dialog, right click (select) Local Area Connection and open its
Properties dialog box.
3. Click on Internet Protocol (TCP/IP).
4. In the General tab, check “Use the following IP addresses” to open the IP data window.
5. Fill in all IP and DNS address fields as appropriate to your dealership. Ask your dealership systems
administrator or IT professional for assistance with this step if you do not know the necessary entries.
6. Select OK and close all dialog boxes, and Restart the laptop (Start > Turn Off Computer > Restart).
7. Connect a dealership network Ethernet cable to the laptop and confirm internet connectivity, i.e.:
launch Internet Explorer.
Continued …11/
Page 10 of 15
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
9.2.2 – Static IP Configuration – Windows 7
1. From the Windows desktop, click Start > Control Panel > Network and Internet > Network and
Sharing Center.
2. Click Change Adapter Settings.
3. Right click Local Area Connection and choose Properties.
4. Click Internet Protocol Version 4 (TCP/IPv4)
5. Place a dot in Use the following IP Address and Use the following DNS server addresses.
6. Fill in all IP and DNS address fields as appropriate to your dealership. Ask your dealership systems
administrator or IT professional for assistance with this step if you do not know the necessary entries.
7. Select OK and close all dialog boxes, and Restart the tablet (Start > Turn Off Computer > Restart).
Connect a dealership network Ethernet cable to the tablet and confirm internet connectivity, i.e.: launch
Internet Explorer.
9.3 – Download and Install Netviewer Software
Note
Netviewer telediagnosis software enables VWGoA support personnel to access your device
remotely during support call consultation. When necessary, consultants will instruct you to start the
Netviewer application, and they will provide a session number to start a remote diagnosis session.
An active internet connection must be available before continuing, i.e.: static IP configuration performed as
instructed in Section 9.2 or DHCP connection confirmed.
1. From the Windows desktop, launch Microsoft Internet Explorer.
2. Logon to ServiceNet.
3. From the Workshop Equipment section, select VAS Tester > Software.
4. Right click the link to the Netviewer one2one – Telediagnosis Software.
5. Select Save Target As… from the menu and save file to the Windows desktop.
6. When the save is complete select “Close” from the dialog box and close all remaining windows.
9.4 – Additional Information
Before proceeding to use the VAS 6160C, please read the "Panasonic CF-53 Series Operating
Manual", containing additional important information regarding the unit, its accessories and its care.
Page 11 of 15
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
10.0 – Install Offboard Diagnostic Information System Service (ODIS Service)
10.1 – General Information
Dealerships are responsible for requesting an ODIS Service license, and then installing and configuring
the latest “installation version” of ODIS Service available.
A security certificate to enable vehicle Software Version Management (SVM) and module adaptations must
also be requested and installed.
For detailed instructions, refer to Service Information - ODIS Service document titles (in order of use):
•
ODIS Service Installation Phase 1 - Preparation and License Request Instructions (eShop)
•
ODIS Service Installation Phase 2 - Software Installation & Configuration Instructions
•
ODIS Service Installation Phase 3 - Security Certificate Request & Installation Instructions
Note
Before proceeding to Section 11.0, prepare the laptop, request the license, install and configure
the latest version of ODIS Service etc. in phase order, exactly as instructed in the three Service
Information document titles specified above!
Continued …13/
Page 12 of 15
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
11.0 – VAS 5054A Transmitter Head Setup
11.1 – General information
The VAS 6150C is equipped with a Bluetooth® (wireless) interface for operation of the supplied VAS
5054A Transmitter Head:
The VAS 5054A is powered by the vehicle Data Link Connector (DLC) when connected, and
communicates with the laptop and the diagnostic software via Bluetooth (wireless) mode or supplied
USB cable via USB mode.
11.2 – Windows Bluetooth & EDIC Configuration
Bluetooth (wireless) operation is possible only with the laptop wireless operation switch in the ON
position. Visible confirmation of wireless operation is via the wireless operation indicator on the upper
LED array adjacent to the laptop carrying handle -arrow-:
Prior to first use of the VAS 5054A and ODIS Service in Bluetooth (wireless) mode, the VAS 5054A
must be configured to the Windows Bluetooth and EDIC software on the laptop.
ODIS Service must be installed before Windows Bluetooth and EDIC software configuration. For detailed
instructions refer to Service Information - VAS Tester document title: VAS 5054A Transmitter Head –
Bluetooth & EDIC Configuration – ODIS Service Only.
Continued …14/
Page 13 of 15
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
11.3 – VAS 5054A USB (cabled) Operation
If the laptop is used to perform Software Version Management (SVM) flash procedures or ant-theft
immobilizer adaptations, a USB (cabled) connection must be used between the VAS 5054A and the
laptop. This ensures an uninterrupted data stream.
Prior to first use with a USB cable, the laptop and transmitter head must be configured for USB
(cabled) operation. For instructions refer to Service Information – VAS Tester document title: VAS
5054A Transmitter Head - USB Configuration & Function – ODIS Service Only
Notes
• For USB (cabled) connection of VAS 6150C to VAS 5054A, the supplied USB cable is of
the Rugged USB 2.0 type. A circular, secure (locked) laptop connection is used.
•
To connect, line up the two dots and insert the connection straight into the Rugged USB 2.0
port on the rear of the laptop -arrow A-:
•
To disconnect, release the connector lock by sliding the locking collar away from the laptop
-arrow B-:
A
B
12.0 – Warranty Registration
A formal warranty registration process for new laptop for warranty coverage is no longer necessary.
The device serial number was automatically registered with the US/CDN market service provider for
warrantable repairs at the time of purchase.
In case of warranty repair requests, please provide the serial number of the device to the VWGoA DTSS
consultant at the toll-free number listed below.
Page 14 of 15
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
13.0 – Malfunctions and Support
All VAS 6150C are tested before leaving the factory. Selected components and numerous quality
control inspections ensure high reliability of your new diagnostic laptop.
Should performance or functional issues occur after placing the device into service, please attempt to
identify and localize as accurately as possible. Try to determine if the symptom is a result of the
Panasonic CF-53 laptop hardware, Windows operating system, ODIS Service software or
dealership network (for internet connectivity). Then proceed as follows:
•
For laptop hardware and operating system issues, consult the information in the
"Troubleshooting" chapter in the Panasonic CF-53 Operating Manual.
Also review the latest VAS Tester FAQs and Service Information document topics in the
Workshop Equipment – VAS Tester section of ServiceNet. The issue may be previously known
and a resolution already published.
•
For ODIS Service software functional issues, review the latest ODIS Service FAQs and
Service Information document topics in the Workshop Equipment – ODIS Service section of
ServiceNet. The issue may be previously known and a resolution already published.
•
If it is not possible to resolve the issue with the aid of the Panasonic CF-53 Operating Manual or
ServiceNet documents, contact:
VWGoA DTSS: 1-888-896-1298
Page 15 of 15
© 2014 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: VVT-14-02
Replacement Service Bulletin Number:
MFR Communication Date: 2014-01-10
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.