NHTSA ID Number: 10071049
Manufacturer Communication Number: VOS-13-13
TSB/Document Date: 2016-06-13
Summary
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Service Information
Offboard Diagnostic Information System Service (ODIS Service)
Number: VOS-13-13
Subject: ODIS Service Installation Phase 3 - Security Certificate
Request & Installation Instructions
Date: June 26, 2013
Supersedes VOS-12-09 due to updated screenshots and revised information
1.0 – Introduction
Installation of the ODIS Service Security Certificate is required on each individual diagnostic device to
enable online software updates, vehicle immobilizer adaptations and SVM etc.
Use this document to request and install a security certificate on VAS diagnostic devices where a security
certificate was not previously installed or to request and install a replacement certificate.
Installation Phases 1 through 3 must be completed on all new devices prior to using ODIS Service for
vehicle diagnosis.
Important prerequisites and preparations must be noted and fulfilled prior to proceeding!
We recommend printing these instructions.
Notes:
The following procedures must be performed by the dealership ODIS Service Administrator or IT
Professional, or personnel qualified to perform software installations.
Perform all instruction steps in the exact order given. Heed all Prerequisites and Notes!
Perform the update in an area that is quiet, clean, and without distraction or interruption.
If assistance with specific instruction steps is needed, contact VWGoA DTSS: 1-888-896-1298.
We encourage installers to FIRST read this document in its entirety to become familiar
with the step-by-step processes and prepare accordingly.
2.0 – Security Certificate Request & Management
2.1 – Device Preparation and ODIS Service Software Installation Prerequisites
All preparations and instructions in the ODIS Service Installation Phase 1 - Preparation & License
Request and Phase 2 - Software Installation & Configuration documents must be completed and all
necessary outcomes achieved:
Diagnostic device(s) assigned with unique Device ID.
USB flash drive prepared with Device ID folders containing License and Certificate
subfolders.
Diagnostic device Hardware Key generated via eShop and saved/recorded in Master List
Wordpad document on USB flash drive.
License request submitted via eShop.
License file received via email and copied to applicable Device ID / License subfolder
on USB flash drive.
The latest version of ODIS Service software installed and configured.
Page 1 of 10
ver1.4
© 2013 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
2.2 – Certificate Request
Prerequisites:
ODIS Service Administrator granted logon access to the eCRMS certificate request
application on vwhub.
Prepared USB flash drive with Master List Wordpad document (containing the device
hardware key) and Device ID / License folders (containing the saved license file) on
hand.
Perform requests using a network-connected PC or laptop, connected to a printer.
Note the Device ID of an eligible diagnostic device.
ATTENTION!
DO NOT proceed with the request process if the diagnostic device hardware key was not
recorded on the USB Flash drive or otherwise recorded electronically. Manual (typed-in) entry of
the hardware key in the request form is not possible!
1. Insert prepared USB flash drive into available port on a network PC or laptop connected to a printer.
2. Open the USB flash drive directory.
3. Start Internet Explorer and Logon to vwhub.
4. Select the My Hub or Service category.
5. From the Related Sites menu (far left) click on ODIS Certificate Request Mgmt. System (eCRMS).
6. Complete the eCRMS logon.
7. Select Create Certificate:
8. The eShop license referred to below is the ODIS Service license file that was installed during the
Installation Phase 2 process. Click Yes:
Continued …3/
Page 2 of 10
© 2013 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
Information must be entered in all certificate request interface fields marked with an asterisk ( * ):
9. Enter applicable information in the Dealer/Site Information section
* Dealer Number
10. Enter applicable information in the Contact Information section:
* Contact Name
* Contact Phone Number
* Contact email / * Confirm email.
11. Enter applicable information in the Device Information section as follows:
a. Minimize the eCRMS browser session and navigate to the USB flash drive directory.
b. Open the prepared Master List Wordpad document and locate the Device ID previously noted.
c. Select and Copy the first 32 characters (only) of the device’s corresponding Hardware Key from
the Master List (this step saves the 32-character hardware key in “clipboard” memory).
d. Restore the eCRMS browser session.
e. In the *Hardware ID field, use Windows® keystroke combination Ctrl + V to Paste the 32character Hardware Key into the field. (Manual entry is not possible).
f.
In the *Device Type field, Select the device type from the dropdown menu.
g. In the *Device Name field, Enter the corresponding, assigned Device ID.
Note:
Assigned Device IDs must be accurately noted and associated with its Hardware Key in the
preceding step. The Device ID and Hardware Key entered above will appear next to the certificate
file staged in eCRMS during the Certificate Management steps. Ref. Section 2.3.
12. When all required information fields ( * ) are filled in, click Submit:
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxx
Page 3 of 10
© 2013 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
13. Note the email address and/or fax number from the Important dialog message. Click OK:
14. Print the confirmation page (click Print):
15. In the printed copy, fill in the Service Manager’s name.
16. Have your Service Manger sign and date the printed copy.
17. Fax the printed form to (248) 754-6302 or scan and email form to information.security@vw
.com
18. Safely remove /eject the prepared USB flash drive.
19. Retain USB flash drive for the Certificate Management steps. Ref. Section 2.3.
When the certificate request is approved:
The certificate is created and is staged for download in eCRMS.
An email is sent, instructing you to logon to eCRMS to locate and download the certificate.
Note:
Certificate request confirmation emails can be expected within one working day from the time of
submission.
Certificate Request steps complete
Continue to the Certificate Management process, Section 2.3 – Page 5.
Page 4 of 10
© 2013 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
2.3 – Certificate Management
Prerequisites:
Certificate confirmation email received.
Prepared USB Flash drive on hand.
1. Insert prepared USB flash drive into available port on a network PC or laptop.
2. Logon to vwhub and navigate through My Hub or Service > Related Sites > ODIS Certificate
Request Mgmt. System (eCRMS). A new browser window will open.
3. Logon as necessary and then select View Certificate:
4. Enter your Dealer Number, select Status: Active, and click Search:
A screen with active certificate(s) for the dealership appears:
1. Note the Device ID associated with a posted certificate and place a checkmark () next to the
certificate number:
2. Click Download Certificate: Note the Download Instructions dialog, and click OK:
3. Navigate to the applicable Device ID folder on the prepared USB flash drive, and Save the certificate
in the Certificate subfolder:
4. Ensure certificate file appears as being saved in the applicable Device ID / Certificate subfolder.
Page 5 of 10
© 2013 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
5. Select Close eCRMS:
6. Safely remove /eject prepared USB flash drive
7. Retain USB flash drive for certificate installation. Ref. Section 3.0.
Certificate Management steps complete
3.0 – Security Certificate Installation
Prerequisites:
Diagnostic device plugged in to power adapter and booted to Windows® desktop.
Note the Device ID of the device on which the certificate installation is being made.
VAS 5052A: Recommend connecting USB mouse and keyboard for easier input.
Prepared USB flash drive with saved certificate file(s) on hand.
1. Insert prepared USB flash drive into diagnostic device requiring certificate installation.
2. From the Windows desktop, click the DiagStarter icon.
3. Select Offboard Diagnostic Information System Service.
4. From the ODIS Service main screen, select the Admin operating mode:
5. Click the Certificate tab:
Continued …7/
Page 6 of 10
© 2013 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
6. Click Select:
6. Navigate to directory for USB flash drive: “Removable…” (_:):
7. Open the USB Flash drive directory and navigate to the Device ID folder for the device on which the
certificate installation is being done.
Continued …8/
Page 7 of 10
© 2013 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
8. Open the Certificate subfolder and select/highlight the saved certificate file (xxxx-cert). Then click
Open to copy the certificate file to the installation window entry:
Note: DO NOT double click on certificate file in its saved location!
9. Ensure certificate file appears as being copied (directory path illustrated is example only):
10. Minimize the ODIS Service window.
11. Navigate to the Master List WordPad document on the USB flash drive.
12. From the list, locate the Device ID of the device on which the certificate installation is being done.
Page 8 of 10
© 2013 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
13. Select and Copy the 32-character hardware key (only) next to the Device ID of the device. Do not
copy the additional device information etc. after the first colon.
14. Restore the ODIS Service window.
15. Paste the 32-character hardware key (only) in the Password entry field as illustrated below. Ensure
that no extra spaces or characters are present. When a valid certificate and password (hardware key)
are recognized, the Import button will become active. Click Import:
The certificate is imported and appears in summary form in the Available certificate window.
16. Click Ok:
Page 9 of 10
© 2013 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
17. Click Diagnosis to return to the main screen or Close the application.
18. Safely remove /eject the USB flash drive and retain for future reference and support.
19. Save / back up the security certificate file on the diagnostic device and additional USB flash drive as
instructed in the ODIS Service Installation Phase 2 – Software Installation & Configuration
document, Sections 5.2 and 5.3.
Security Certificate Installation completed
Page 10 of 10
© 2013 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this
document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: VOS-13-13
Replacement Service Bulletin Number:
MFR Communication Date: 2013-06-26
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM:SOFTWARE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 🎉[OTOFIX D1 Lite, Perfect Cost-effective Diagnostic Tool]: OTOFIX D1 Lite, a newest bidirectional scan tool from OTOFIX company, is a great choice for DIYers and repair shops. 👉This obd2 scanner diagnostic tool packs all practical functions: OE level all systems diagnoses, Bi-Directional Control, 38+ reset services fixing 99% of common problems, support DoIP & CANDF protocols and FCA
AutoAuth, high-end hardware configuration. Worldwide vehicles and 🔥2 Years Free Updating🔥 covered. - 🎉[Bi-Directional Scan Tool, Active Test]: OTOFIX D1 Lite bluetooth obd2 scanner can also command ECUs and monitor the operation of the actuators to track down the problems of certain parts, like windows, sunroof, wipers, fuel pumps, etc., saving repair time & trouble. This makes OTOFIX D1 Lite the most cost-effective bidirectional scan tool.
- 🎉[2026 Newest, 38+ Hot Reset Functions]: Equipped with 38+ reset functions in one, the OTOFIX D1 lite automotive scanner diagnostic tool allows you to troubleshoot 99% of common vehicle problems. You can use this car diagnostic scanner holding enough functions to easily repair common vehicle models in your repair shops. Including Oil Reset, Injector Coding, Throttle, DPF Reset, SCR Reset, Gear Learning, Clutch Learning, Suspension, etc. Note* Reset functions vary by model.
- 🎉[OE Level Full Systems Diagnostics]: Unlike the 2-system and 4-system diagnostic tools, the OTOFIX auto scan tool can complete comprehensive system diagnostics within 5 minutes. It accesses and scans all available onboard systems like for Engine /AT /ABS /EPB /BMS /TPMS /SRS /SAS /Audio System /BCM /Air Conditioning / etc., to read & clear codes, view live data, and check ECU information. Note: Active test is not involved.
- 🎉[Powerful Hardware Configuration]: Designed with a fashion appearance & a 7” touchscreen and a weight of 463g, this OTOFIX D1 Lite OBD2 diagnostic scanner scan tool is convenient for everywhere and easy to use & store. Android9.0 OS and 2+64GB memory enhance multi-task smoothness and diagnostic operation, no more wasting too much time. 5800mAh battery allows hours-lasting use. WiFi & VCI1 also bring faster communication for your diagnostics.
- 🏆【2026 TOP OBD2 Scanner Diagnostic Tool】OTOFIX D1 Lite wireless obd2 scanner has upgraded hardware configuration and car coverage. The newly upgraded D1 Lite with 🔥OS Android 9.0🔥1.5Ghz 4 core high efficiency processor🔥2GB RAM
+64GB ROM large storage🔥5800mAh large battery, more stable and longer lasting diagnostics🔥 38+ Reset🔥action tests🔥full system diagnostic🔥Supports MV105 endoscope🔥21+ Language Supports🔥100000+ vehicle coverage to meet all your daily maintenance needs. - 👍【Bi-Directional Control / Active Test】D1 Lite obd2 scanner has bidirectional control(worth $300+), which is the most beloved feature among mechanic. If your headlights or car windows are broken, going to a repair shop will cost a lot of money. You can use D1 Lite to send execution commands to the ECU module and identify the repair status. Such as ABS, car windows, doors, valves, wipers, headlights, etc., effectively shorten diagnostic time and reduce diagnostic costs.
- 🔥【All Systems Diagnostics, In-depth Checking】This advanced OBD2 Scanner D1 Lite can perform OE-level diagnosis of all systems including engine, transmission, airbag, ABS, ESP, TPMS, gateway, steering, radio, and air conditioning for more than 100 brands. This diagnostic scanner supports essential functions, such as reading ECU version info, reading and clearing fault codes, and reading data streams.With just a simple click, it provides you with accurate and in-depth diagnostics.
- 🏆【38+ Reset Hot Functions】For repair workshops, holding an OTOFIX D1 Lite Auto scanner is a strong advantage over others. Its 38+ maintenance functions provide various solutions for all module repairs, including Oil Reset, TPMS Reset, Injector Coding, Suspension, Throttle Matching, etc., which will usher your repair business to a new pinnacle. Continuously updating will never make the functionality & compatibility out-of-date.
- 🏆【150+ Models, 10000+ Car Coverage & 16 Languages】D1 Lite is a comprehensive car diagnostic scan tool, help you to troubleshoot car issues fast for 95% US, European, Asian auto makes. ✅ With frequent updates and optimizations allow D1 Lite to cover more vehicles to meet your needs. ✅ Multilingual menu allows auto mechanics around the world to use it without language barriers. 🚩Note: Kindly send us the S/N of the device to authorize new language updates before changing the menu language.
- 2026 Newest Wireless Bluetooth Scan Tool D1: OTOFIX D1 Diagnostic scanner is upgraded version with Enhanced Hardwares & Newest Functions, FASTER and SMARTER! ✅Alternative Bluetooth 5.0 +USB connect✅2G+64GB✅Android 9.0 OS✅5G & 2.4 GHz Dual WiFi✅5800mAh battery👍VAG Guided Function👍ECU Online Coding👍CANFD&DOIP👍40+ Services👍Bi-Directional Control👍Full Systems Diagnose👍2 Years Free Update👍150+ Vehicle Coverage🎁Contact to get gift: otofixaftersales-amz@ outlook.com
- ECU Coding to Unlock the Hidden Features: OTOFIX D1 obd2 scanner diagnostic tool newly adds ECU Coding which can Online Coding(ONLY for VW
/Au.di/Sk0da), Variant Coding/Offline Programming, Flash Hidden Functions, Reset Adaptive Data, Match Replaced Components, Customize OE-Settings. Such as: halogen fog lamps retrofitted with xenon fog lamps, different capacity battery retrofit, disbale auto start-stop, sunroof initialization, injector calibration, etc. PS: Coding functions vary by model&year. - Full Bidirectional Control for Active Car Tests: The D1 OTOFIX scanner also offers bi-directional control, allowing you to perform powerful active tests on car subsystems. This means that you can check the working status and functionality of open & close solenoids, energize injectors, turn cooling fan on & off, and more, all from the device itself.🚩The D1 bi-directional obd2 scanner can quickly help you to check if a system or component goes well,Improving 200% Efficiency.**Note that Active Tests available depend on the make/model/year of your car.
- 40+ Popular Maintenance Functions: OTOFIX D1 obd scanner for car performs 40+ hot services, including Oil Reset, EPB, TPMS, BMS, E.GR, G.PF, D.PF, SAS Calibration, ABS Bleeding, Injector Coding, Gearbox Match, Suspension, Crankshaft Relearn, Power Balance, etc., still growing. Great choice for DIYers, technician, repair shop. 🚩Get MORE special functions from "Car Brand>System>Service". Check compatibility before purchase via 📧 otofixaftersales-amz@ outlook.com.
- OE-Level All Systems Diagnostic + One-Click AutoVIN & AutoSCAN: OTOFIX D1 scanner automotriz gives you the ability to troubleshoot entire car systems including engion system,transmission system,body system,chassis,etc. 🚩One of the standout features of the D1 obd2 scanner diagnostic tool is the one-click AutoVIN & AutoScan function. This feature allows you to quickly and easily scan all diagnosable ECUs with just one click, and identify any problems hidden in your vehicle's systems.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




