NHTSA ID Number: 10066461
Manufacturer Communication Number: AOS-14-15
TSB/Document Date: 2016-05-23
Summary
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Service Information
Offboard Diagnostic Information System Service (ODIS Service)
Number: AOS-14-15
Subject: ODIS Service Installation Phase 2 – Software Installation Date: June 10, 2014
& Configuration Instructions
Supersedes AOS-14-12: Windows® XP & VAS-PC references deleted.
Table of Contents
Page
Section
1.0
Introduction - Must Read!
2
1.1
New Installations - Overview
2
1.2
Reinstallations - Overview
2
Preparation
3
2.0
2.1
Device and License Request Checklists
3
2.2
Hardware Prerequisites – All Installations
4
2.3
Reinstallations - Uninstall ODIS Service
4
2.4
Note the DVD-ROM Drive Letter
5
3.0
Installation
5
3.1
Application Software & License Installation
5
3.2
Post-Setup - Diagnostic Data Installation
12
4.0
Post-Setup Configuration
15
4.1
Administration - General
15
4.2
Administration - Support
18
4.3
Administration - Connections
19
Post-Installation File Management & Back-Up
21
5.1
General Information
21
5.2
Backup Device Folder on USB Flash Drive
22
Online Updates
22
General Information
22
5.0
6.0
6.1
Page 1 of 22
© 2014 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi
of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
Notes:
• The following procedures must be performed by qualified personnel only!
• Please read these instructions in their entirety before performing these procedures. If you do not
have previous experience loading software or do not understand these instructions, arrange
to have a qualified person perform these procedures.
• Heed all prerequisite requirements and notes, and follow all instruction steps in the Section
order given, including instructions cross-referenced in documents posted on ServiceNet.
• Perform the procedures in an area that is quiet, clean and without distraction or interruption.
• Discard all printed copies of this document after use. Revised versions may be issued at any
time. Always check ServiceNet for the latest version.
1.0 – Introduction
This document describes the complete installation and configuration processes of ODIS Service
Installation DVD Version 2.1.0 on VAS diagnostic devices with Windows 7 operating systems. The
installation options covered here are:
• New installations
• Reinstallations.
Separate instructions for each installation option are covered throughout this document. Refer to
Subsections 1.1, 1.2 and 1.3 below for information on how to use these instructions.
In all cases, important preparations and prerequisites must be fulfilled prior to proceeding!
1.1 - New Installations
New Installations are defined as installations on:
•
New devices where ODIS Service was not previously installed.
•
Existing devices that have been updated from Windows XP to Windows 7 using the AoAsupplied DVD.
In both cases, ALL ODIS Service Installation Phases (1, 2 and 3) must be completed, in phase order, on
all new or updated devices prior to using ODIS Service. All phase documents are posted on ServiceNet.
Look for the New Installations subsection titles and references throughout this document.
1.2 – Reinstallations
Reinstallations are defined as installations on existing VAS diagnostic devices where ODIS Service was
previously installed.
Reinstallations may be necessary whenever new “installation version” DVDs are issued, or to resolve
application malfunctions on an existing version.
Look for the Reinstallations subsection titles and references throughout this document.
Page 2 of 22
© 2014 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi
of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
2.0 – Preparation
2.1 – Device and License Preparation Checklists
Complete the device and license checklist for the installation option that applies:
New Installations – Device and License Preparation Checklist
New device where ODIS Service was not previously installed:
VAS 6150C laptop
or
VAS 6160A tablet
Existing device updated from Windows XP to Windows 7 using the AoA-supplied DVD:
VAS 6150A laptop
VAS 6150B laptop
VAS 6150C laptop
VAS 6160 tablet
VAS 6160A tablet
All devices: ODIS Service Installation Phase 1 - Preparation & License Request Instructions (eShop)
completed:
License requested from eShop and license request approval email received
License file downloaded from eShop to a folder on the diagnostic device desktop
DO NOT proceed without the license file intended for the device!
New Installations checklist completed. Proceed to Section 2.2 - Page 4.
Reinstallations – Device and License Preparation Checklist
Existing device where ODIS Service was previously installed:
VAS 6150A laptop
VAS 6150B laptop
VAS 6150C laptop
VAS 6160 tablet
VAS 6160A tablet
Existing license file saved in a folder on the diagnostic device desktop*
or
Existing license file backed-up on USB flash drive*
*If the existing license file is not available, request a replacement license from eShop > Phase 1 Instructions
Reinstallations checklist completed. Proceed to Section 2.2 - Page 4.
Page 3 of 22
© 2014 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi
of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
2.2 – Hardware and Network Prerequisites – All Installations
ODIS Service Version 2.1.0 DVD - Order No. 009.5002.02.21 on hand.
Device disconnected from dealership network: Ethernet cable disconnected, device wireless
operation switch in the OFF position where applicable.
A Windows 7 update MUST NOT be in the process of being downloaded or installed. Go to:
Control Panel > Windows Update to confirm!
Diagnostic device with functioning CD/DVD drive and USB.
Diagnostic device plugged in to A/C power adapter and booted to Windows desktop.
VAS Diagnostic Tablets: Device mounted in base station with USB mouse and keyboard
connected.
2.3 – Reinstallations – Uninstall ODIS Service
ODIS Service must always be uninstalled along with additional files prior to reinstallations. Use the
procedures specified below.
Reinstallation Tips:
• If you are unaware of, or have not recorded the Email Outbox Server configuration settings,
please note them now! Go to: ODIS Service > Admin > Support > E-mail outbox server …and
record the various settings on a separate piece to use during the post-reinstallation configuration.
• If the license file was not saved in a folder on the Windows desktop, or if the USB flash drive
containing the backup license file is not available, copy the installed license to the Windows
desktop prior to uninstallation as follows:
1. From the Windows desktop, go to: Windows (Start) > Computer > Local Disc (C:) > Program
Files (x86) > Offboard_Diagnostic_Information_System_Service > license
2. Right click the license (.dat) file.
3. Select Copy, and then close all windows.
4. Paste the license on the Windows desktop (for retrieval during the installation routine) and revisit
the Phase 1 instructions, Section 3.5 for a suggested method to save the license file in a
desktop folder.
Uninstall ODIS Service and Softing D-PDU API files:
1. Go to: Windows (Start) > All Programs > (ODIS Service) > ODIS Service Uninstallation Program
or uninstall ODIS Service using the applicable Windows “Add or Remove Programs” utility.
2. When prompted, check the boxes to remove all licenses, MCD projects, diagnostic logs etc. Scroll
down in the prompt window and check all boxes as necessary.
3. Restart the diagnostic device when prompted.
4. Go to: Windows (Start) > All Programs > Softing D-PDU API for VCIs > 1.X0.0XX > Uninstall (Be
aware that more than one Softing D-PDU API file may be listed under Programs).
5. Follow the uninstallation routine for ALL available D-PDU API 1.X0.0XX files.
6. Restart the diagnostic device.
Continued …5/
Page 4 of 22
© 2014 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi
of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
2.4 – Note the DVD-ROM Drive Letter
The installation routine directs you navigate to a content folder on the installation DVD.
As DVD-ROM drive letter assignments may not be consistent between devices, they may or may not
match the examples illustrated in these instructions. Please note YOUR drive letter as follows:
1. From the Windows desktop, go to: Windows (Start) > Computer
2. Note the letter assigned to the DVD RW Drive ( _ 🙂
3. Close the Computer Window.
All Preparation steps completed. Proceed to Section 3.0 below.
3.0 – Installation
3.1 – Application Software & License Installation
1. Insert ODIS Service Version 2.1.0 DVD into the DVD-ROM drive. The DVD should AutoPlay.
2. Select Open folder to view files:
If the DVD does not AutoPlay, go to: Windows (Start) > Computer and open the DVD-ROM directory.
3. Wait while the directory contents are read.
4. Click on OffboardDiagSetup-Service_2_1_0-RC.…:
Continued …6/
Page 5 of 22
© 2014 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi
of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
modified or reposted to other sites, without the prior expressed written permission of the publisher.
Service Information
5. Wait while the Install4j wizard prepares the installation:
6. Confirm English (US) is highlighted. Click OK.
7. Click Next:
8. No action needed. Click Next:
Page 6 of 22
© 2014 Audi
of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual
property rights of Audi
of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may
be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: AOS-14-15
Replacement Service Bulletin Number:
MFR Communication Date: 2014-06-10
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM:SOFTWARE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS
, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford
, for Lincoln
, and for Mazda
ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS
Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS
Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first - Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
Last update on 2026-06-30 / Affiliate links / Images from Amazon Product Advertising API
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS
/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS
/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities. - 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS
Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming. - 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




