NHTSA ID Number: 10066102
Manufacturer Communication Number: 14079G
TSB/Document Date: 2016-05-19
Summary
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Bulletin No.: 14079G
Date: September 2014
Recall Bulletin
PRODUCT SAFETY RECALL
SUBJECT:
Front Axle Right Half Shaft Fracture
MODELS:
2013-2014 Chevrolet
Cruze
Equipped with 1.4L Turbo Engine (LUV)
The Part Information section has been revised to remove one of the two part numbers for the
half shaft for manual transmissions. The stock for part number 13371620 has been exhausted.
Please discard all copies of bulletin 14079F.
It is a violation of Federal law for a dealer to deliver a new motor vehicle or any new or used item
of motor vehicle equipment (including a tire) covered by this notification under a sale or lease
until the defect or noncompliance is remedied.
Vehicles involved in this recall were placed on stop delivery March 27, 2014. Once the service
procedure contained in this bulletin has been performed on the vehicle, the vehicle is released
from stop delivery and the vehicle can be delivered to the customer.
All involved vehicles that are in dealer inventory must be held and not delivered to customers,
dealer traded, or used for demonstration purposes until the repair contained in this bulletin has
been performed on the vehicle.
Some vehicles involved in this Safety Recall were repaired under Safety Recall 13276. A
suspect half shaft may have been installed in the vehicle during the repair. These customers
are being asked to return to the dealership for an inspection and possible half shaft replacement.
CONDITION
General Motors
has decided that a defect which relates to motor vehicle safety exists in some
2013-2014 model year Chevrolet
Cruze vehicles, equipped with a 1.4L turbo engine (LUV). The
interconnecting tubular bar on the front right axle half shaft on some of these vehicles may not
meet GM specification and could fracture and separate. If this occurs while driving the vehicle,
steering and braking control would be maintained; however, the vehicle would lose power to the
wheels and would coast to a stop. If a vehicle with a fractured half shaft is parked on an incline
without the parking brake applied, the vehicle could move unexpectedly, resulting in a possible
crash or injury to pedestrians.
CORRECTION
Dealers are to inspect and, if necessary, replace the half shaft.
Copyright 2014 General Motors
. All Rights Reserved.
Page 2
September 2014
Bulletin No.: 14079G
VEHICLES INVOLVED
All involved vehicles are identified by Vehicle Identification Number on the Investigate Vehicle
History screen in GM Global Warranty Management system. Dealership service personnel
should always check this site to confirm vehicle involvement prior to beginning any required
inspections and/or repairs. It is important to routinely use this tool to verify eligibility because
not all similar vehicles may be involved regardless of description or option content.
For dealers with involved vehicles, a listing with involved vehicles containing the complete
vehicle identification number, customer name, and address information has been prepared and
will be provided to dealers through the GM GlobalConnect Recall Reports. Dealers will not have
a report available if they have no involved vehicles currently assigned.
The listing may contain customer names and addresses obtained from Motor Vehicle
Registration Records. The use of such motor vehicle registration data for any purpose other
than follow-up necessary to complete this recall is a violation of law in several
states/provinces/countries. Accordingly, you are urged to limit the use of this report to the followup necessary to complete this recall.
PART INFORMATION
Parts required to complete this recall are to be obtained from General Motors
Customer Care
and Aftersales (GMCC&A). Please refer to your “involved vehicles listing” before ordering parts.
Normal orders should be placed on a DRO = Daily Replenishment Order. In an emergency
situation, parts should be ordered on a CSO = Customer Special Order.
Note: When placing an order for a half shaft, order only one of the listed part numbers. If that
particular part number is not available, dealers will be sent the half shaft that is available at that
time.
Part Number
13367770
13371628,
13334705,
13367771, or
13335132
11611964
19258728
11518632
19259104 – US
19259105 – CN
88861037 – US
19264717 – CN
*
Description
SHAFT, FRT WHL DRV HALF (Manual Trans)
SHAFT, FRT WHL DRV HALF (Automatic Trans)
Quantity/Vehicle
1 (if req'd)
1 (if req'd)
WASHER, FRT WHL DRV SHF
PLUG, TRANS OIL DRN (Manual Trans)
BOLT
1*
1*
1*
FLUID, M/TRANS (70W)
2*
FLUID, A/TRANS (Dexron VI)
Up to 7 quarts*
Required only if half shaft is replaced.
Page 3
September 2014
Bulletin No.: 14079G
SERVICE PROCEDURE
Note: Always confirm vehicle involvement in IVH prior to beginning any required inspections
and/or repairs. It is important to routinely use this tool to verify eligibility because not all similar
vehicles may be involved regardless of description or option content. Below are the build dates
of the vehicles involved in this recall.
Automatic transmissions: November 28, 2012 – January 8, 2014
Manual transmissions: November 28, 2012 – March 7, 2014
Right Front Axle Half Shaft Service Stock Inspection
Service Part Number 13371620 (Manual Trans Tubular)
1. Inspect the inboard side of the shaft (shorter portion between rubber isolator and boot) for a
green stripe, green dot or combination of green stripe and green dot.
3924829
If one of these markings (3) are present, this is a good part.
If there are no green markings on the inboard portion of the shaft (4) this part should
be returned to General Motors
under special return message G_0000187857 dated
March 18, 2014 (US) or GMP 2014-073 dated March 17, 2014 (CN).
Service Part Number 13371628 (Auto Trans Tubular)
3773590
Page 4
September 2014
Bulletin No.: 14079G
1. Inspect outboard side of the half shaft (longer portion of shaft between CV joint and
isolator). Determine if a machined groove is present on the half shaft.
If the machined groove is present (A) on the half shaft, the part can be used for
service.
If the machined groove is NOT present (B) on the half shaft, proceed to step 2.
2. Inspect the inboard side of the shaft (shorter portion between rubber isolator and boot) for a
green stripe, green dot or combination of green stripe and green dot.
If these markings are present, this part can be used for service.
If no green strip, green dot, or green stripe and dot is present, this part should be
returned to General Motors
under special return message G_0000187857 dated
March 18, 2014 (US) or GMP 2014-073 dated March 17, 2014 (CN).
Service Part Number 13334705, 13367771, 13335132 (Auto Trans solid shaft) and 13367770
(Manual Trans solid shaft)
3919719
Solid Shaft
Note: Any additional paint marks found on a solid axle shaft can be disregarded.
1. The outboard side of the half shaft (longer portion of shaft between CV joint and isolator) is
a solid painted bar shaft. Same diameter across entire shaft. There are no other
identifications on the half shaft to look for. This part can be used for service.
Page 5
September 2014
Bulletin No.: 14079G
Right Front Axle Half Shaft On-Vehicle Inspection
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in SI.
2. Inspect the right (passenger side) half shaft near the front wheel. Determine if a machined
groove is present on the half shaft.
3773590
(1) Wheel Side of Half Shaft (2) Transmission Side of Half Shaft (A) Machined Groove (B) No Groove
If the machined groove is present (A) on the half shaft, no further action is required.
Lower the vehicle.
If the machined groove is NOT present (B) on the half shaft, proceed to step 3.
3. Inspect the right (passenger side) half shaft near the transmission. Determine if a green
stripe, green dot, or green stripe and green dot is present on the half shaft bar.
3802789
(1) Wheel Side of Half Shaft (2) Transmission Side of Half Shaft (A) Automatic Transmission (B)
Manual Transmission (3) Green Stripe (4) No Stripe (5) Green Dot (6) Green Stripe and Green Dot
Page 6
September 2014
Bulletin No.: 14079G
If a green stripe, green dot, or a green stripe and green dot is present (3, 5, or 6) on
the half shaft, no further action is required. Lower the vehicle.
Note: Replace the half shaft if a blue stripe, blue dot or no stripe (4) is present.
If a green stripe, green dot or green stripe and green dot is NOT present on the half
shaft, replace the half shaft. Refer to Front Wheel Drive Shaft Replacement ---Right
Side in this bulletin.
Front Wheel Drive Shaft Replacement ---Right Side
1. Remove the right side front wheel drive shaft. Refer to Front Wheel Drive Shaft
Replacement --- Right Side in SI.
Note: The outer tie rod nut, drive shaft nut and lower ball joint-to-knuckle nut can be re-used.
This information supersedes the information in SI. Do NOT use a new tie rod nut, drive shaft
nut or lower ball joint-to-knuckle nut unless the fastener is damaged on removal. Apply GM
Teflon Pipe and Thread Sealant (P/N 12346004, USA and P/N 10953480, Canada) to the
threads of the new fluid drain plug.
2. Install a new right side front wheel drive shaft. Refer to Front Wheel Drive Shaft
Replacement --- Right Side in SI.
FLOOR PLAN REIMBURSEMENT
Dealers in possession of vehicles included in the Stop Delivery are eligible for reimbursement of
floor plan expense upon completion of this recall. This reimbursement is limited to the number
of days from the Stop Delivery message to receipt of the recall parts and/or repair procedures.
Floor plan reimbursement beyond these dates is not allowed. The amount of reimbursement
should be charged as a net amount expense using the recall labor operation provided.
COURTESY TRANSPORTATION – For US and Canada
The General Motors
Courtesy Transportation program is intended to minimize customer
inconvenience when a vehicle requires a repair that is covered by the New Vehicle Limited
Warranties. The availability of courtesy transportation to customers whose vehicles are within
the warranty coverage period and involved in a product program is very important in maintaining
customer satisfaction. Dealers are to ensure that these customers understand that shuttle
service or some other form of courtesy transportation is available and will be provided at no
charge. Dealers should refer to the General Motors
Service Policies and Procedures Manual
for Courtesy Transportation guidelines.
Page 7
September 2014
Bulletin No.: 14079G
WARRANTY TRANSACTION INFORMATION
Submit a transaction using the table below. All transactions should be submitted as a ZFAT
transaction type, unless noted otherwise.
Note: To avoid having to "H" route the floor plan transaction for approval, it must be submitted
prior to the repair transaction.
Labor
Code
9100427
9100428
9100724
9100429
Description
Inspect Front Axle Right Half Shaft – No Further Action Req'd
Inspect & Replace Front Axle Right Half Shaft
Courtesy Transportation
Floor Plan Reimbursement
Labor
Time
0.2
1.1
N/A
N/A
Net
Item
N/A
N/A
*
**
* The amount identified in “Net Item” should represent the actual dollar amount for courtesy
transportation.
** The amount identified in “Net Item” should represent the product of the vehicle’s average daily
interest rate (see table below) multiplied by the actual number of days the vehicle was in
dealer inventory and not available for sale. This reimbursement is limited to the number of
days from the date of the stop delivery message (March 27, 2014) to the date the repair is
completed and the vehicle is ready for sale (not to exceed 158 days):
Vehicle
US
Reimbursement Amount
Canadian
Reimbursement Amount
2013 Chevrolet
Cruze
$2.79
$3.43
2014 Chevrolet
Cruze
$2.82
$3.43
CUSTOMER NOTIFICATION
General Motors
will notify customers of this recall on their vehicle.
DEALER RECALL RESPONSIBILITY – For US (US States, Territories, and Possessions)
It is a violation of Federal law for a dealer to deliver a new motor vehicle or any new or used item
of motor vehicle equipment (including a tire) covered by this notification under a sale or lease
until the defect or noncompliance is remedied.
The US National Traffic and Motor Vehicle Safety Act provides that each vehicle that is subject
to a recall of this type must be adequately repaired within a reasonable time after the customer
has tendered it for repair. A failure to repair within sixty days after tender of a vehicle is prima
facie evidence of failure to repair within a reasonable time. If the condition is not adequately
repaired within a reasonable time, the customer may be entitled to an identical or reasonably
equivalent vehicle at no charge or to a refund of the purchase price less a reasonable allowance
for depreciation. To avoid having to provide these burdensome remedies, every effort must be
made to promptly schedule an appointment with each customer and to repair their vehicle as
soon as possible. In the recall notification letters, customers are told how to contact the US
National Highway Traffic Safety Administration if the recall is not completed within a reasonable
time.
Page 8
September 2014
Bulletin No.: 14079G
DEALER RECALL RESPONSIBILITY – All
All unsold new vehicles in dealers' possession and subject to this recall must be held and
inspected/repaired per the service procedure of this recall bulletin before customers take
possession of these vehicles.
Dealers are to service all vehicles subject to this recall at no charge to customers, regardless of
mileage, age of vehicle, or ownership, from this time forward.
Customers who have recently purchased vehicles sold from your vehicle inventory, and for which
there is no customer information indicated on the dealer listing, are to be contacted by the dealer.
Arrangements are to be made to make the required correction according to the instructions
contained in this bulletin.
In summary, whenever a vehicle subject to this recall enters your vehicle inventory, or is in your
dealership for service in the future, you must take the steps necessary to be sure the recall
correction has been made before selling or releasing the vehicle.
GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of conditions that
may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the tools,
equipment, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to
your vehicle, or that your vehicle will have that condition. See your dealer for information on whether your vehicle may benefit from the information.
We Support
Voluntary Technician
Certification
Page 9
September 2014
Bulletin No.: 14079G
IMPORTANT SAFETY RECALL
Dear General Motors
Customer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
General Motors
has decided that a defect which relates to motor vehicle safety exists in certain
2013-2014 model year Chevrolet
Cruze vehicles, equipped with a 1.4L turbo engine. As a
result, GM is conducting a safety recall. We apologize for this inconvenience. However, we
are concerned about your safety and continued satisfaction with our products
IMPORTANT
This notice applies to your GM vehicle, VIN _____________________.
Your vehicle is involved in GM safety recall 14079.
Parts needed for the recall repairs are becoming available for dealers to
order. Please contact your GM dealer to schedule an appointment to
have the recall repairs performed on your vehicle.
This service will be performed for you at no charge.
Why is your
vehicle being
recalled?
The interconnecting tubular bar on the front right axle half shaft may
not meet GM specification and could fracture and separate. If this
occurs while driving the vehicle, steering and braking control would
be maintained; however, the vehicle would lose power to the wheels
and would coast to a stop. If your vehicle has a fractured half shaft
and is parked on an incline without the parking brake applied, the
vehicle could move unexpectedly, resulting in a possible crash or
injury to pedestrians.
What will we
do?
Your GM dealer will inspect the half shaft to determine if your
vehicle has a suspect half shaft. If it does, your dealer will replace
it. This service will be performed for you at no charge. Because of
service scheduling requirements, it is likely that your dealer will need
your vehicle longer than the actual inspection time of approximately
15 minutes. If the half shaft requires replacement, an additional 1
hour will be needed.
Until you have your vehicle repaired, you should apply the park
brake before you exit the vehicle to prevent the vehicle from
moving unexpectedly.
What should
you do?
You should contact your GM dealer to arrange a service
appointment as soon as possible.
Page 10
September 2014
Do you have
questions?
Bulletin No.: 14079G
If you have questions or concerns that your dealer is unable to
resolve, please contact the appropriate Customer Assistance Center
at the number below.
Division
Number
Chevrolet![]()
Guam
Puerto Rico – English
Puerto Rico – Español
Virgin Islands
1-800-222-1020
65-6267-1752
1-800-496-9992
1-800-496-9993
1-800-496-9994
Text Telephones
(TTY)
1-800-833-2438
If after contacting your dealer and the Customer Assistance Center, you are still not satisfied
we have done our best to remedy this condition without charge and within a reasonable time,
you may wish to write the Administrator, National Highway Traffic Safety Administration, 1200
New Jersey Avenue, SE., Washington, DC 20590, or call the toll-free Vehicle Safety Hotline at
1.888.327.4236 (TTY 1.800.424.9153), or go to http://www.safercar.gov. The National
Highway Traffic Safety Administration Campaign ID Number for this recall is 14V151.
Federal regulation requires that any vehicle lessor receiving this recall notice must forward a
copy of this notice to the lessee within ten days.
Jim Moloney
General Director,
Customer and Relationship Services
GM Recall #14079
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 14079G
Replacement Service Bulletin Number:
MFR Communication Date: 2014-09-01
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: POWER TRAIN:AXLE ASSEMBLY
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 2026 ALL-IN-ONE HEAVY DUTY TRUCK SCANNER – BUILT FOR DIESEL DIAGNOSTICS:The ANCEL X7HD PRO combines full-system diagnostics, bi-directional control, ECU coding, HDOBD/OBD2 functions, and 42+ reset services in one powerful heavy duty truck scanner. This diesel scan tool helps technicians, fleet owners, and repair shops diagnose problems faster, reduce downtime, and complete more repairs without switching between multiple truck diagnostic tools. Features a 10.1" Android tablet, Bluetooth & Wi-Fi, live data graphing, and 2 years of f-ree updates
- 42+ RESET FUNCTIONS – MORE THAN A BASIC TRUCK CODE READER:Perform essential service functions including forced DPF regeneration, injector coding, speed limiter adjustment, idle adjustment, oil reset, ABS reset, SRS reset, EPB reset, throttle reset, and suspension calibration. Designed for real truck maintenance and fleet service, this commercial truck diagnostic scanner helps reduce dealer visits, avoid unnecessary downtime, and handle more repair jobs with one diesel diagnostic tool
- ACTIVE TEST & ECU CODING – ADVANCED BIDIRECTIONAL SCAN TOOL FOR TRUCKS:Quickly locate faults by activating components and sending commands directly to vehicle systems. Test injectors, ABS, throttle, cooling systems, and other modules in real time without unnecessary disassembly. ECU coding and module matching help adapt replacement parts, restore factory settings, and reduce repeat repairs, making this semi truck scan tool ideal for advanced troubleshooting and daily shop work
- FULL-SYSTEM HDOBD/OBD2 DIAGNOSTICS – WIDE TRUCK & ENGINE COVERAGE:Read and clear codes, monitor live data, freeze frame, and diagnose engine, transmission, ABS, body, and other major systems. Compatible with Freightliner
, Kenworth
, Peterbilt
, Volvo
, Mack
, International
, and other commercial truck brands, plus Cummins
, Caterpillar
, Detroit, Paccar
, and Navistar
diesel engines. Also supports full OBD2/EOBD diagnostics for standard vehicles, making it a versatile truck obd2 scanner for mixed fleets and repair shops - PROFESSIONAL HARDWARE + RELIABLE SUPPORT – BUILT FOR DAILY SHOP USE:This professional diesel diagnostic computer features a 10.1" touchscreen, Android 10.0 system, 6000mAh battery, Bluetooth/Wi-Fi connectivity, and built-in front & rear cameras for documenting repairs and remote troubleshooting. Includes 2 years of fr-ee updates, 1-year w-arranty, and responsive technical support. Contact [email protected] before purchase to confirm compatibility and supported functions for your truck or diesel engine
- 【Built for Heavy Duty Diesel Diagnostics】Designed for SAE J1939 and J1708 compliant trucks, buses, and diesel-powered commercial vehicles. HD601 truck scanner diagnostic tool helps owner-operators, small fleets, mobile technicians, and independent repair shops quickly identify fault codes, view live data, and make informed repair decisions—saving time, reducing downtime, and avoiding unnecessary shop visits
- 【Full System Diagnostics+All HD OBD Modes】The New HD601 heavy duty truck scanner delivers full-system diagnostics on SAE J1939 and J1708-compliant commercial vehicles—digging into engine, transmission, ABS, fuel, every system that keeps your rig rolling. It supports all HD OBD modes, giving you live data, freeze frame, ECU info, vehicle info, emissions data tracking, plus code reading and clearing. Not just what broke, but why—so you fix it right the first time. Pinpoint issues faster, cut repair costs, and spend less time on the shoulder
- 【Wide Heavy-Duty Vehicle Coverage】Supports a wide range of heavy-duty vehicle manufacturers and systems, including Freightliner
, Kenworth
, Peterbilt
, Volvo
, International
, Detroit, Cummins
, Paccar
, Allison, Eaton
, Bendix
, Wabco, and more. Coverage varies by vehicle make, model, year, and system configuration. Contact our support team before purchase if compatibility verification is needed - 【Speaks Major Truck Protocol】The New HD601 diesel truck scanner is built for American-made trucks—and supports the heavy‑duty protocols you' re most likely to run into on the road: SAE J1939, J1708/J1587, ISO 15765‑4, ISO 14230‑4, ISO 9141‑2, J1850 PWM/VPW, ISO 27145‑4, and EURO‑6. For most trucks, model years, and systems, it speaks the language your vehicle understands. Just plug it in and start diagnosing—no guesswork, no gatekeeping. Note: vehicle functions and module availability may vary by manufacturer and model year
- 【Save Hundreds on Diagnostic Fees】Why pay $150–300 for someone to read your codes? With the New ANCEL heavy duty truck scanner, you can pull fault codes yourself—in minutes, without leaving the truck. One or two uses pays for the tool. After that, every diagnostic is money back in your pocket. Smart investment for owner-operators, techs, and small fleets. Read and clear stored fault codes in minutes. Active fault codes may require repairs before they can be cleared
- 【One Tool, Total Fleet Coverage: 6/9/16 Pin Ready】Featuring an integrated 16-pin OBD2 connector and professional-grade 6-pin & 9-pin adapters, this heavy duty truck scanner provides extensive support for J1939, J1708, J1587, ISO 14230-4, ISO 15765-4 and ISO 9141-2, ISO 27145-4 protocols. It offers reliable diagnostic coverage for major American diesel brands—including Cummins
, Paccar
, Caterpillar
, Detroit, and Freightliner
—making it a versatile semi truck scanner for managing any diverse fleet. - 【2 in 1 Diesel Code Reader & Advanced HD OBDII】Equipped with professional-grade diesel scanner capabilities, the HD301 features intuitive Read/Erase codes and turn off the "Check Engine" light. With the built-in DTC Lookup library, you can instantly access fault code definitions on-device without searching the internet. It also retrieves hundreds of essential live sensor data—such as coolant temperature, fuel pressure, and engine RPM—in a stable text format for precise and rapid troubleshooting. (Please note that the HD301 can not support DPF Regen.)
- 【Full System Truck Diagnostic】The FOXWELL HD301 heavy duty scan tool is engineered to deeply access and scan all available electronic control modules specifically for truck, including Engine, Transmission, ABS, SRS, Chassis, and Body Control. This professional truck scanner diagnostic tool allows you to identify issues across the entire vehicle, ensuring your rig stays in peak condition for the long haul.
- 【Versatile for most big Rigs: Commercial, Passenger & Beyond】Engineered for more than just trucks, this heavy duty scan tool offers extensive coverage for pickups, buses, trailers, and even marine vessels. From construction machinery (excavators, loaders) to agricultural equipment (tractors, harvesters), it provides a true all-in-one diagnostic solution.
- 【Plug-and-Play & No Subscription】Designed for the road! No WiFi, no batteries, and no complex App setup required. Simply plug it into your vehicle’s diagnostic port to start scanning immediately. Enjoy lifetime free software updates to keep your HD301 diesel truck scanner current with the latest vehicle models and features—without any hidden subscription fees—While overcoming language barriers with support for Spanish and English.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




