Technical Service Bulletin
37 Gearbox warning light on (DTC P060B00 stored in TCM)
37 14 45 2028405/4 September 26, 2014. Supersedes Technical Service Bulletin Group 37 number 14-40 dated
August 1, 2014 for reasons listed below.
Model(s)

Year

VIN Range

Vehicle-Specific Equipment

A4, A4 Avant, A5,
A5 Cabriolet

2011 - 2012

All

All with 2.0L and 8 Speed tiptronic

Q5

2011 - 2012

All

All with 2.0L and 8 Speed tiptronic

Condition
REVISION HISTORY
Revision

Date

Purpose

1

-

Revised header data (Added Model Year 2011)
Revised Condition (Removed Tip)

3

8/1/2014

Revised header data (Removed Model Year 2011)
Revised Condition (Added Tip)

2

5/15/2014

Revised Service (Updated SVM Table)
Revised Warranty (Updated Damage Code; corrected Labor Operations)

1

1/26/2012

Initial publication

• Customer may report that the transmission warning light is on.
• DTC P060B00 (2528) (Internal Control Module A/D Processing Performance) is stored in the transmission
control module (TCM), J217 (address word 02).

Technical Background
A software change in the diagnosis function was made.

© 2014 Audi of America, Inc.

Page 1 of 3

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.

Technical Service Bulletin
Production Solution
Not applicable.

Service
If this fault is present, update the TCM software.
SVM Update Instructions
1. Follow all instructions in TSB 2011732, 00 Software Version Management (SVM), operating instructions.
2. Update the TCM using the SVM action code as listed in the table below if necessary.

Model

Engine and/or

Old Software

Transmission

Part Number

Old
Software
Version

8K0 927 158 K
A4, A5, A5

8K0 927 158 Q

Cabriolet

or
2.0 with 0BK

8K0 927 158 S

Transmission

8R0 927 158 E

Audi Q5

All

New Software
Part Number

New Software
Version
(or higher)

8K0 927 158 K

1014

8K0 927 158 S

1007

8R0 927 158 E

1015

8R0 927 158 T

1010

SVM Code
Input

02A072

8R0 927 158 M
or
8R0 927 158 T

Tip: Do not replace the mechatronics for this fault.

© 2014 Audi of America, Inc.

Page 2 of 3

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.

Technical Service Bulletin
Warranty
Claim Type:

Use applicable claim type. If vehicle is outside any warranty, this Technical Service Bulletin
is informational only.

Service Number:

3730

Damage Code:

0041

Labor Operations:

Update TCM software

3730 2599

40 TU

Diagnostic Time:

GFF – Checking and clearing fault codes included in

No allowance

0 TU

Road test prior to service procedure

No allowance

0 TU

Road test after service procedure

0121 0004

10 TU

existing labor operations

Technical diagnosis at dealer’ s discretion
(Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details)
Claim Comment:

As per TSB #2028345/4

All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures

Manual. Claims are subject to review or audit by Audi Warranty.

Additional Information
The following Technical Service Bulletin will be necessary to complete this procedure:
• TSB 2011732 00 Software Version Management (SVM), operating instructions.
All parts and service references provided in this TSB (2028405) are subject to change and/or removal. Always
check with your Parts Department and service manuals for the latest information.

© 2014 Audi of America, Inc.

Page 3 of 3

All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior
expressed written permission of the publisher.