File in Section:

Service Bulletin

-

Bulletin No.:

PIE0149F

Date:

July, 2013

PRELIMINARY INFORMATION
Subject:

Engineering Information – Engine No Crank/No Start Due to Discharged 12V Battery

Models:

2012-2013 Chevrolet Volt

Attention: Proceed with this PI ONLY if the customer has commented about this concern AND the
PIE number is listed in GWM/IVH. If the customer has not commented about this
condition or the EI does not show in GWM/IVH, disregard the PI and proceed with
diagnostics found in published service information. THIS IS NOT A RECALL – refer to
Service Bulletin 04-00-89-053E for more details on the use of Engineering
Information PIs.
This PI is being revised to update the models. Please discard PIE0149E.

Condition
Important: If the customer did not bring their vehicle in for this concern, DO NOT proceed with this PI.
Some customers may comment that the vehicle will not crank or start because the 12V battery is drained or dead.

Cause
GM Engineering is attempting to determine the root cause of the dead 12V battery concern. Engineering has a need
to gather information on vehicles PRIOR to repair that may exhibit this condition. As a result, this information will be
used to “root cause” the customer's concern and develop/validate a field fix.

Instructions
Important: DO NOT disconnect the 12V battery prior to making contact with the engineer.
If a vehicle that exhibits the above customer concern is found, please contact the engineer listed below for further
instructions on root cause analysis of the condition and repair of the vehicle. DO NOT disassemble/repair or replace
any parts prior to calling.

Contact Information
Engineer Name

Phone Number

Mick Dowd

(248) 804-0398

If the engineer is unable to take your call, please leave the information listed below in a message.
– Technician name
– Dealer name and phone number
– Complete VIN and repair order number
On the repair order, document the date and time the call was placed (even if the engineer was not reached).
If engineering is unable to return the call within one hour, proceed with diagnosis and repair based on information
found in SI.

Warranty Information
If engineer was contacted or required information was provided, use:
Labor
Operation
J7740*

Description
Engineering Information –
Engine No Crank/No Start Due
to Dead Battery

Labor
Time
0.2 hr

*This is a unique labor operation for bulletin use only. It will
not be published in the Labor Time Guide.