®TOYOTA
T-SB-0174-13

Rev1

Technical Service Bulletin

November 27, 2013

2014 Highlander Pre-Delivery Service (PDS)
Service
Category

General

Section

Pre-Delivery Service

Market

USA

Toyota Supports ~
ASE Certification¥

Appl icabi Iity
YEAR(S)

MODEL(S)

2014

Highlander

ADDITIONAL INFORMATION

REVISION NOTICE
December 20, 2013 Rev1 :
• Before Inspection and Under Vehicle sections have been updated.
Any previous printed versions of this bulletin should be discarded.

Introduction
Pre-Delivery Service (PDS) is a critical step in satisfying your dealership's new car customers.
Customer feedback indicates the following areas deserve special attention when performing PDS:
• Carefu l inspection for paint chips/scratches and body dents/dings.
• Proper operation of electrical accessories (including interior light, clock, and radio reset).
• Interior cleanl iness.
• Proper function of mechanical systems.
Customer retention and proper maintenance of vehicles has been a major focus for Toyota. To help
remind customers that regular oil changes are essential to the proper maintenance of their vehicle,
dealers are required to begin installing a first oil change reminder sticker prior to delivery. By doing
this, customers will be reminded to return to your dealership for their first oil change. Your current
oil change reminder sticker may be used. (See PDS Check Sheet item 8 of "Final Inspection &
Cleaning.'?
A new PDS Check Sheet has been developed for the 2014 model year Highlander. Some check
points have been added, expanded, or clarified . Bulletins are available for items in bold.
Warranty Policy
If the need for additional repairs or adjustment is noted during the Pre-Delivery Service, the
required service should be performed under warranty. Reimbursement will be managed under the
warranty policy.

© 2013 Toyota Motor Sales, USA

Page 1 of 7

@TOYOTA

Rev1

T-SB-0174-13

November 27, 2013

Page 2 of 7

2014 Highlander Pre-Delivery Service (PDS)

Warranty Policy (Continued)

The Warranty Policy and Procedures Manual requires that you maintain the completed PDS
Check Sheet in the customer's file. If you cannot produce a completed form for each retailed
vehicle upon TMS and/or Region/Distributor audit, the PDS payment amount will be subject to debit.
An additional Repair Order completed in conjunction with normal PDS must have time punch/flags
for service. If multiple repairs are performed , separate time flags must be punched for each repair.
Warranty Information
OP CO DE

DESC RIPTION

MODEL

TIME

OFP

T1

T2

001013

Pre-Delivery Service (PDS)

Highlander

1.1

-

-

-

Required Tools & Equipment
REQUIRED EQUIPMENT

SUPPLIER

Techstream 2.0*
TIS Techstream

PART NUMBER

QTY

TS2UN IT
ADE

Techstream Lite

TSPKG 1
TSLITEDLR01

• Essential SST.

NOTE
• Only ONE of the Techstream units listed above is required.
• Software version 8.30.023 or later is required .
• Additional Techstream units may be ordered by calling Approved Dealer Equipment (ADE) at
1-800-368-6787.

Before Inspection

When performing new car PDS, install the Short Pin before moving the vehicle from the storage
lot so that FUNCTIONAL OPERATION checks can begin as soon as the vehicle is moved into
the service stall.
1. Install Short Pin - see check sheet
2. Install antenna* - T-SB-0025-13

© 2013 Toyota Motor Sales, USA

1

@TOYOTA

T-SB-0174-13

Rev1

November 27, 2013

Page 3 of 7

2014 Highlander Pre-Delivery Service (PDS)

Functional Operation

Apply the parking brake and cycle the ignition to "IG-ON," place the gear selector in reverse, and turn
on the lights and rear defogger. Unlock all the doors, release the fuel door, and release the back door.
1. Check dome, courtesy, map, and sun visor lights*
2. Check warning/indicator lights, gauges, and horn
3. Check windshield wipers and washers
4. Check headlights, instrument lights, turn signals, emergency flashers, and brake lights

5. Check inside/outside rear view mirror operation/adjustment
6. Check cigarette lighter* and power outlets
Check the power outlet using an electrical accessory designed for this use.
7. Check audio/navigation*/backup camera* systems and set clock
For navigation, set the destination search area to the correct location.
8. Check multi-information on center display (vehicles WITH and WITHOUT navigation).
NOTE
Refer to the multi-information display section in the vehicle's Owner's Manual for a
comprehensive list of the system's functions and displays.

9. Install shift-lock override button cover
10. Check sliding roof*
11. Check Rear Seat Entertainment system operation*
Walkaround Inspection

Start at left front door. Check window and door lock operation (from master power switch, if
equipped). Continue around vehicle in a counterclockwise direction checking each door and window
operation, child door locks, seat belts, interior condition, all lights, and luggage compartment
contents. Remove rubber body plugs from glove box for installation during UNDER VEHICLE
inspection.
1 . Check Smart Key System - T-SB-0020-13
2. Check door and door lock operation, including each wireless remote control/theft deterrent
system*
3. Check window operation
4. Check that engine starts with all keys

© 201 3 Toyota Motor Sales, USA

@TOYOTA

Rev1

T-SB-0174-13

November 27, 2013

Page 4 of 7

2014 Highlander Pre-Delivery Service (PDS)

Walkaround Inspection (Continued)

5. Check that child safety door locks are in normal (unlocked) position
6. Check seats and seat belt operation
7. Check rear defogger/rear view mirror defogger*
8. Check side marker, tail, backup, cargo*, and license plate lights
9. Check luggage compartment trim appearance
10. Check headlight aim
NOTE

Refer to the Repair Manual for procedures.

Under Hood

1. Check engine oil level
2. Check brake fluid level
3. Check engine coolant level
4. Check inverter coolant level*
5. Check windshield washer fluid level
6. Check battery state-of-charge using Digital Battery System Analyzer

Refer to Service Bulletin No. PG001-06, "Battery Maintenance for In-Stock Vehicles &
Pre-Delivery."
NOTE

•

Maintenance-free Panasonic batteries can be replenished with distilled water.

•

Battery SOC s hould be a minimum of 75%. Please enter th e SOC Reading on th e space
provided on the check sheet and attach the printout to the check sheet.

7. Inspect for fuel, oil, coolant, and other fluid leaks

© 2013 Toyota Motor Sales, USA

@TOYOTA

Rev1

T-SB-0174-13

November 27, 2013

Page 5 of 7

2014 Highlander Pre-Delivery Service (PDS)

Under Vehicle

1. Remove disc brake anti-rust covers/anti-corrosion wheel film - PD017-04
Visually inspect rotors for rust.
NOTE
For best rotor rust prevention, retain wheel film on vehicle until just prior to customer delivery.

2. Inspect tires for defects/damage
3. Adjust spare tire pressure, inspect for damage, and check jack and tool installation
4. Initialize Tire Pressure Warning System (TPWS) - see check sheet
5. Install wheel covers/caps/spare tire wheel covers*
6. Inspect for fuel , oil , coolant, and other fluid leaks
7. Inspect under the vehicle for damage, rust, etc.
8. Visually check bolts and nuts on chassis and powertrain for looseness
9. Install rubber body plugs
Install the rubber plugs into the front and rear torque box holes.
NOTE
The two body plugs are stored in the glove box.

Road Test

A complete road test helps assure customer satisfaction. Drive the vehicle over a variety of road
surfaces and driving conditions. Check for unusual noise and vehicle performance.
1. Check cold engine operation
Check starting and fast idle operation performance.
2. Check engine operation during warm-up
Check that engine operates smoothly during warm-up.
Check for unusual noise, engine vibration , rough idle, etc.
3. Check engine at normal operating temperature
Check engine performance over under a broad range of driving conditions, including idle quality,
acceleration, cruise, and deceleration.

© 2013 Toyota Motor Sales, USA

@TOYOTA

Rev1

T-SB-0174-13

November 27, 2013

Page 6 of 7

2014 Highlander Pre-Delivery Service (PDS)

Road Test (Continued)
4 . Check transmission operation
Check transmission operation, including operation in each range, neutral start switch , and
shift lock system .

5. Check brake and parking brake operation
Check brake fu nction , including unusual noise, parking brake performance and all related brake
system indicator lights.
6. Check steeri ng operation and off-center/vehicle pull/flutter

Check steering function .
Check steering off-center/veh icle pull/flutter
7. Inspect for abnorm al noise and vi bration

8. Inspect for squeaks and rattles

9. Check front and rear* heater and A/C operation
10. Check cruise control operation*
Check cruise control, including "ON-OFF," "-SET," "+RES," and "CANCEL'.' functions.
11 . Check front seat heater/ventilation operation*
12. Set/calibrate compass* - see check sheet
13. Initialize parking assist monitor system - see check sheet
Final Inspection & Cleaning
1. Remove interior protective covers, unnecessary labels, tags, etc. (Remove protective covers
just before delivery to customer.)
Remove plastic covers from door pa nels, seats, head restraints, and sun visors, as required.
Remove labels, tags, and stickers (except those containing owner information) .
NOTE
Customer information labels, such as the fuel caution, airbag warnings, and bumper labels,
MUST be left on the vehicle until delivery to a retail customer.
2. Verify floor mat application and install using retaining clips* - T-SB-0023-13
3. Visually inspect all interior parts for installation, damage, fit, dirt, etc.
4. Remove Rapgard ™ and clear protective bumper film*
Ensure that ALL glue residue is removed.
© 2013 Toyota Motor Sales, USA

@TOYOTA

Rev1

T-SB-017 4-13

November 27, 2013

Page 7 of 7

2014 Highlander Pre-Delivery Service (PDS)

Final Inspection & Cleaning (Continued)

5. Wash and clean vehicle
6. Inspect paint fi nish for scratches, chips, rust, de nts, damage, etc.
7. Inspect exteri or body parts for proper installation, da mage, rust , etc.
8. Place oil change sticker on inside of windshield, top left corner
Complete the mileage or date recommendation and apply the oil change reminder sticker to the
inside of the windshield, top left corner. You may use your current oil change reminder sticker.
9. Place Owner's Guide and first aid kit portfolio* in glove box
10. Install front license plate and mounting bracket* - see check sheet
11 . Perform Techstream Health Check
Perform Health Check to ensure that diagnostic trouble codes are not present. Health Check
results can be printed for the customer at delivery, or for the dealer file, using the Diagnostic
Report function .
• Inspect or install when equipped or required

© 2013 Toyota Motor Sales, USA