""'·

@ TOYOTA T.,SB-0094-13

2014 Sequoia
Service
Category
Section

Technica1 Service Bull~tin -=

July 31, 2013

Pre~Delivery ~ervice

(PDS)

General
Market

Pre-Delivery Service

USA

Toyota Supports ~
ASE Certification -

Applicability
YEAR(S)

MODEL(S)

2014

Sequoia

ADDITIONAL INFORMATION

Introduction
Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback
indicates the following areas deserve special attention when performing PDS:
• Careful inspection for paint chips/scratches and body dents/dings.
• Proper operation of electrical accessories (including interior light, clock, and radio reset).
• Interior cleanliness.
• Proper function of mechanical systems .
Customer retention and proper maintenance of vehicles has been a major focus for Toyota . To help
remind customers that regular oil changes are essential to the proper maintenance of their vehicle,
dealers are required to begin installing a first oil change reminder sticker prior to delivery. By doing
this, customers will be reminded to return to your dealership for their first oil change . Your current
oil change reminder sticker may be used. (See PDS Check Sheet item 8 of "Final Inspection &
Cleaning.'}
A new PDS Check Sheet has been developed for the 2014 model year Sequoia. Some check points
have been added, expanded, or clarified. Bulletins are available for items in bold type.
Warranty Policy
If the need for additional repairs or adjustment is noted during the Pre-Delivery Service, the required
service should be performed under warranty. Reimbursement will be managed under the warranty
policy.
The Warranty Policy and Procedures Manual requires that you maintain the completed PDS
check sheet in the customer's file. If you cannot produce a completed form for each retailed
vehicle upon TMS and/or Region/Distributor audit, the PDS payment amount will be subject to debit.
An additional Repair Order completed in conjunction with normal PDS must have time punch/flags
for service. If multiple repairs are performed , separate time flags must be punched for each repair.

© 2013 Toyota Motor Sales, USA

Page 1 of 6

@ TOYOTA

T-SB-0094-13

July 31, 2013

Page 2 of 6

2014 Sequoia Pre-Delivery Service (PDS)

Reimbursement Information
OP CODE

DESCRIPTION

TIME

OFP

T1

T2

001013

Pre-Delivery Service (PDS)

1.0

N/A

N/A

N/A

Required Tools & Equipment

I

REQUIRED EQUIPMENT

I

Techstream 2.0*

I

TIS Techstream

I

Techstream Lite

SUPPLIER

PART NUMBER

QTY

TS2UNIT
ADE

TSPKG1

1

TSLITEDLR01

* Essential SST.

NOTE
•

Only ONE of the Techstream units listed above is required.

•

Software version 8.20.019 or later is required.

• Additional Techstream units may be ordered by calling Approved Dealer Equipment (ADE) at
1-800-368-6787.

Before Inspection

When performing new car Pre-Delivery Service, install Short Pin before moving vehicle from storage
lot so that FUNCTIONAL OPERATION checks can begin as soon as vehicle is moved into the
service stall.
1. Install Short Pin - see check sheet
Functional Operation

Apply parking brake and cycle ignition "IG-ON"; place gear selector in reverse, turn on lights and rear
defogger. Unlock all doors, release fuel door, release luggage compartment hatch.
1. Check dome, courtesy, map, and sun visor lights*
2. Check warning/indicator lights, gauges, and horn
3. Check windshield wipers and washers
4. Check headlights, instrument lights, turn signals, emergency flashers , and brake lights
5. Check inside/outside rear view mirror operation/adjustment
6. Check cigarette lighter and power outlets*
Check the power outlet using an electrical accessory designed for this use.

© 201 3 Toyota Motor Sa les, USA

....
@TOYOTA

July 31, 2013

T-SB-0094-13

Page 3 of 6

2014 Sequoia Pre-Delivery Service (P[)S) ·

Functional Operation (Continued)

7. Check audio/navigation*/backup camera* system and set clock
For navigation, set the destination search area to local position.
8. Install shift-lock override button cover
9. Check sliding roof*
10. Check Rear Seat Entertainment System operation*
11. Check Parking Assist System*
Walkaround Inspection

Starting at the left front door, check window and door lock operation and the operation of all power
windows and door locks from master switch, on vehicles so equipped. While walking around
vehicle in a counterclockwise direction, open left rear door and check operation of window regulator
and door lock, set Child Safety Door Lock to the normal (unlocked) position. Assure tightness of
interior garnishes and check seat belts. Inspect luggage compartment contents and lights at rear
of vehicle. Repeat checks at right rear door. Inspect right front door window regulator and lock
operation and garnishes. Check seat and seat belt operation. Continue on around to the front of
the vehicle checking lights.
1. Check Smart Key System* - T-SB-0020-13

2. Check door and door lock operation, including each wireless remote control/theft deterrent
·
system*
3. Check window operation
4. Check that engine starts with all keys
5. Check that child safety door locks are in normal (unlocked) position*
6. Check seats and seat belt operation
7. Check rear defogger*/rear view mirror defogger*
8. Check side marker, tail, backup, and license plate lights
9. Check luggage compartment light* and trim appearance
10. Check jack and tool installation
11. Check headlight aim
Refer to the Repair Manual for procedures.

© 2013 Toyota Motor Sales, USA

@TOYOTA

July 31, 2013

T-SB-0094-13

Page 4 of 6

2014 Seque>ia Pre-Delivery Service (PDS)

Under Hood

1. Check engine oil level
2. Check brake and power steering* fluid levels
Visually inspect using see-through reservoirs.
3. Check engine coolant level
4. Check windshield washer fluid level
5. Check battery state-of-charge using Digital Battery System Analyzer
Refer to Service Bulletin No. PG001-06, "Battery Maintenance for In-Stock Vehicles &
Pre-Delivery."
NOTE

Battery SOC should be a minimum of 75%. Please enter the SOC Reading on the space
provided on the check sheet and attach the printout to the check sheet.

6. Inspect for fuel, oil, coolant, and other fluid leaks
Under Vehicle On Hoist)

1. Remove disc brake anti-rust covers/anti-corrosion wheel film - PD017-04
Visually inspect rotors for rust.
NOTE

For best rotor rust prevention, retain wheel film on vehicle until just prior to customer delivery.

2. Inspect tires for defects/damage
3. Initialize Tire Pressure Warning System (TPWS) - see check sheet
4. Install wheel covers/caps/spare tire wheel covers*
5. Inspect for fuel, oil, coolant, and other fluid leaks
6. Inspect under the vehicle for damage, rust, etc.
7. Visually check bolts and nuts on chassis and powertrain for looseness
8. Install rubber body plugs (stored in glove box or center console)*

© 2013 Toyota Motor Sales, USA

.......

@TOYOTA

July 31, 2013

T-SB-0094-13

Page 5 of 6

2014 Sequoia Pre-Delivery Service (PDS)

Road Test

A complete road test helps assure customer satisfaction. Drive vehicle over a variety of road
surfaces and driving conditions. Check for unusual noise and driving performance.
1. Check cold engine operation
Check starting and fast idle operation performance.
2. Check engine operation during warm-up
Check that engine operates smoothly during warm-up.
Check for unusual noise, engine vibration, rough idle, etc.
3. Check engine at normal operating temperature
Check engine performance over a broad range of driving conditions, including idle quality,
acceleration, cruise, and deceleration.
4. Check automatic transmission operation
Check automatic transmission operation, including operation in each range, neutral start switch,
and shift lock system.
5. Check brake and parking brake operation
Check brake function, including unusual noise, parking brake performance, and all related
brake system indicator lights.
6. Check steering operation and "off-center/vehicle pull/flutter
Check steering function. Check steering off-center/vehicle pull/flutter.
7. Inspect for abnormal noise and vibration
8. Inspect for squeaks and rattles
9. Check front and rear* heater and A/C operation
10. Check cruise control operation
Check cruise control, including On-Off switch, "SET/COAST," "RESUME/ACCEL," and "CANCEL:'
functions.
11. Check Blind Spot Monitor System*
Check when the switch is "ON", the indicator is illuminated.
Check when a vehicle is detected in the blind spot, the outside rear view mirror indicator on
that side illuminates.
12. Check front seat heater/ventilation operation*

© 2013Toyota Motor Sales, USA

July 31, 2013

T-SB-0094-13

2014

Sequ~~ia

Page 6 of 6

Pre-Delivery Service (PDS)

Road Test (Cor tinued)

13. Set/calibrate compass* - see check sheet

14. Check rear height control air suspension*
Final Inspection & Cleaning

1. Remove interior protective covers, unnecessary labels, tags, etc. (Remove protective covers
just before delivery to the customer)
Remove plastic covers from door panels, seats, head restraints, and sun visors, as required.
Remove labels, tags, and stickers (except those containing owner information).
NOTE

Consumer information labels, such as airbag information warning and bumper information
labels, MUST be left on the vehicle until delivery to a retail customer.

2. Visually inspect all interior parts for installation, damage, fit, dirt, etc.
3. Verify floor mat application and install using retaining clips* -T-SB-0023-13

4. Remove Rapgard™ and clear protective bumper film*
Ensure that ALL glue residue is removed.

5. Wash and clean vehicle
6. Inspect paint finish for scratches, chips, rust, dents, damage, etc.
7. Inspect exterior body parts for proper installation, damage, rust, etc.

8. Place oil change sticker on inside of windshield, top left corner
Complete the mileage or date recommendation and apply the oil change reminder sticker to the
inside of the windshield, top left corner. You may use your current oil change reminder sticker.

9. Place Owner's Guide and first aid kit portfolio* in glove box
10. Perform Techstream Health Check
Perform Health Check to ensure that diagnostic trouble codes are not present. Health Check
results can be printed for the customer at delivery, or for the dealer file, using the Diagnostic
Report function.

11 Install front license plate and mounting bracket - see check sheet
1

*lnsbect or install when equipped or required

I

© 2013 Toyota Motor Sales, USA

-- -- T