T-SB-0058-13 Service Bulletin/Repair Instructions

®TOYOTA

Rev1
T-SB-0058-13
Technical Service Bulletin
April 26, 2013
Flex Fuel Extended Crank due to Alcohol Density

Calculation

Service

Category
Engine/Hybrid System
Section
Engine Control
Market
Toyota Supports ~

ASE Certification
W
USA
Applicability

YEAR(S)
MODEL(S)
2012 - 2013
Sequoia
2012 - 2013
Tundra
ADDITIONAL INFORMATION
REVISION NOTICE
June 6, 2013 Rev1:

• Warranty Information and Repair Procedure sections have been updated.

Any previous printed versions of this bulletin should be discarded.
Introduction
Some 2012-2013 model year Sequoia and Tundra vehicles with the 3UR-FBE engine may exhibit a

MIL "ON" condition with Diagnostic Trouble Codes (DTCs) P0171/P0174 (System too Lean Bank 11

Bank 2), P0172/P0175 (System too Rich Bank 1/Bank 2), P1604 (Startability Malfunction) , and/or

P1605 (Rough Idling) after attempting to start the engine. Alcohol Density Estimate values may be

high even though the vehicle was fueled with regular fuel (EO/E 10). The Engine Control Module/ECM

(SAE term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of this

condition occurring. Use the following repair procedure to reprogram the ECM (PCM).

Warranty Information

OP CODE
EG1308*
DESCRIPTION
TIME
Reprogram ECM

(PCM) Engine, Reset

Values, and Add Fuel
0.7
MODEL
Sequoia
ENGINE
TOWING

OPTION
OFP
Standard
89661-0CN20

89661-0CN21

89661-0CN22

89661-0CN23
Tow
89661-0CN30

89661-0CN31

89661-0CN32

89661-0CN33
3UR-FBE
© 2013 Toyota Motor Sales, USA
T1
T2
8A
99
Page 1 of 8
@TOYOTA
T-SB-0058-13
Rev1
April 26, 2013
Page 2 of 8
Flex Fuel Extended Crank due to Alcohol Density Calculation
Warranty Information (Continued)

OP CODE
EG1308*
DESCRIPTION
TIME
Reprogram ECM

(PCM) Engine, Reset

Values , and Add Fuel
0.7
MODEL
Tundra
ENGINE
TOWING

OPTION
OFP
Standard
89661-0CM60

89661-0CM61

89661-0CM62

89661-0CM63
Tow
89661-0CM?O

89661-0CM71

89661-0CM72

89661 -0CM73
3UR-FBE
T1
T2
8A
99
* A maximum of $15.00 (3 gallons of fuel) will be allowed under Sublet type "GA".
APPLICABLE WARRANTY

• This repair is covered under the Toyota Federal Emission Warranty. This warranty is in effect

for 96 months or 80,000 miles, whichever occurs first, from the vehicle's in-service date.

• Warranty application is limited to occurrence of the specified condition described in this

bulletin.
Calibration Information

MODEL
ENGINE
DRIVETRAIN
TOWING

OPTION
PREVIOUS
NEW
Standard
30CK5000

30CK5100

30CK5200

30CK5300
30CK5400
Tow
30CK6000

30CK6100

30CK6200

30CK6300
30CK6400
Standard
30CJ9000

30CJ9100

30CJ9200

30CJ9300
30CJ9400
Tow
30CKOOOO

30CK0100

30CK0200

30CK0300
30CK0400
Sequoia
3UR-FBE
CALIBRATION ID
4WD
Tundra
© 2013 Toyota Motor Sales, USA
@ TOYOTA
Rev1
T-SB-0058-13
April 26, 2013
Page 3 of 8
Flex Fuel Extended Crank due to Alcohol Density Calculation
Parts Information

MODEL
ENGINE
TOWING

OPTION
PART NUMBER

PART NAME

PREVIOUS
NEW
Standard
89661-0CN20

89661-0CN21

89661-0CN22

89661-0CN23
89661-0CN24
Tow
89661-0CN30

89661-0CN31

89661-0CN32

89661-0CN33
89661-0CN34
Standard
89661-0CM60

89661-0CM61

89661-0CM62

89661-0CM63
89661-0CM64
Tow
89661-0CM?O

89661-0CM71

89661-0CM72

89661-0CM73
89661-0CM?4
Sequoia
3UR-FBE
Tundra
QTY
-
Computer,

Engine Control

(ECM/PCM)
-
-
PART NUMBER
PART NAME
QTY
00451-00001 -LBL
Authorized Modification Labels
1
NOTE

• The ECM (PCM) should NOT be replaced as part of the repair procedure.

• Authorized Modification Labels may be ordered in packages of 25 from the Materials

Distribution Center (MDC) through Dealer Daily - Dealer Support Materials Orders.
© 2013 Toyota Motor Sales, USA
@TOYOTA
T-SB-0058-13
Rev1
April 26, 2013
Page 4 of 8
Flex Fuel Extended Crank due to Alcohol Density Calculation
Required Tools & Equipment

REQUIRED EQUIPMENT
SUPPLIER
Techstream 2.0*

TIS Techstream
PART NUMBER
QTY
TS2UNIT

ADE
Techstream Lite
TSPKG1
1
TSLITEDLR01
SPECIAL SERVICE TOOLS (SST)
PART NUMBER
QTY
GR8 Battery Diagnostic Station*
00002-MCGR8
1
NOTE

• Only ONE of the Techstream units listed above is required.

• Software version 8.10.021 or later is required.

• Additional Techstream units may be ordered by calling Approved Dealer

Equipment (ADE) at 1-800-368-6787.

• Additional SSTs may be ordered by calling 1-800-933-8335.

• The Diagnostic Tester is NOT recommended for flash reprogramming.

Please use Techstream or an approved J2534 interface to perform flash

reprogramming updates. Visit techinfo.toyota.com for more information

regarding J2534 reprogramming.
* Essential SST.
© 2013 Toyota Motor Sales, USA
@TOYOTA
T-SB-0058-13
Rev1
April 26, 2013
Page 5 of 8
Flex Fuel Extended Crank due to Alcohol Density Calculation
Repair Procedure
1. Confirm the difficult-to-start condition .

. 2. Using Techstream, confirm one or more of the following DTCs is present:

• P1604: Startability Malfunction

• P1605: Rough Idling

• PO 171 : System Too Lean (Bank 1)

• P0172: System Too Rich (Bank 1)

• P0174: System Too Lean (Bank 2)

• P0175: System Too Rich (Bank 2)
3. If any of the DTCs listed above is present, confirm the Alcohol Density Estimate and fuel trim

values.

Is the Alcohol Density Estimate value 15% or greater and are the fuel trim values negative?

• YES • NO -
Reprogram the ECM (PCM). Go to step 4.

This bulletin does NOT apply. Continue diagnosis using the applicable Repair Manual.
© 2013 Toyota Motor Sales, USA
@TOYOTA
T-SB-0058-13
Rev1
April 26, 2013
Page 6 of 8
Flex Fuel Extended Crank due to Alcohol Density Calculation
Repair Procedure (Continued)
4. Check for the Authorized Modifications Label affixed to the vehicle in the location shown in

Figure 1. Confirm if the ECM (PCM) calibration has been updated. If the calibration ID listed is

NOT the latest ECM (PCM) calibration - go to step 5.

Figure 1. Location of Authorized Modifications Label on 2012 - 2013 Sequoia and Tundra
=
THE FOLLOWING MODIFICATIONS HAVE BEEN MADE:
THESE MODIFICATIONS HAVE BEEN APPROVED

AS APPROPRIATE BY EPA AND CARB

DATE:

CHANGE AUTHORITY:
1
Replacement ECM (PCM) Part Number (i.e.,

89661-0CN24)
2
New Calibration ID(s) (i.e., 30CK5400)
3
Dealer Code
5
4
Date Completed
5
This SB Number
© 2013 Toyota Motor Sales, USA
@TOYOTA
· T-SB-0058-13
Rev1
April 26, 2013
Page 7 of 8
Flex Fuel Extended Crank due to Alcohol Density Calculation
Repair Procedure (Continued)
5. Flash reprogram the ECM (PCM).

NOTE

• The GR8 Battery Diagnostic Station MUST be used in Power Supply Mode to maintain

battery voltage at 13.5 volts while flash reprogramming the vehicle.

• For details on how to use the GR8 Battery Diagnostic Station, refer to the

GR8 Instruction Manual located on the Technical Information System (TIS), Diagnostics Tools & Equipment - Battery Diagnostics.
Follow the procedures outlined in Service Bulletin No. T-SB-0012-13, "Techstream ECU Flash

Reprogramming Procedure", and flash the ECM (PCM) with the NEW calibration file update.
6. Install the Authorized Modifications Label.

A. Using a permanent marker, enter the following information on the label:

• ECM part number [Refer to the Parts Information section for the NEW PART NUMBER]

• Calibration ID(s) [Refer to the Calibration Information section for the NEW

CALIBRATION ID]

• Dealer Code

• Repair Date

• Change Authority [This SB number]

B. Affix the Authorized Modifications Label to the vehicle at the location shown in

Figure 1. The Authorized Modifications Label is available through the MDC,

P/N 00451-00001-LBL.
7. Disconnect the negative (-)terminal of the battery for 10 minutes. Reconnect battery.

8. Using Techstream, confirm the A/F Learn Values are at 0%.

9. Using Techstream Utility, perform Fuel Density Learning Value Reset.

A. Turn the ignition switch to ON.

B. Enter the following menus:

Powertrain I Engine and ECT I Utility I Fuel Density Learning Value Reset

C. Check that the following conditions are met:

• Ignition switch: ON

• Engine: stopped

• Battery voltage: 9 V or higher
© 2013 Toyota Motor Sales, USA
®TOYOTA
T-SB-0058-13
Rev1
April 26, 2013
Flex Fuel Extended Crank due to Alcohol Density Calculation
Repair Procedure (Continued)
D. Press Next.

HINT
When Next is pressed, initialization is performed automatically.
E. Press Exit.

10. Turn ignition switch OFF.

11. Add 3 gallons of fuel to the vehicle.

12. Using Techstream, confirm the Alcohol Density Learning is Incomplete.

13. Test drive the vehicle to confirm proper vehicle operation.
© 2013 Toyota Motor Sales, USA
I --
Page 8 of 8

Bestseller No. 1

KINGBOLEN Ediag Elite OBD2 Scanner Bluetooth, Bidirectional Test Scanner All System Diagnostic Tool for iOS & Android, 15+ Hot Reset, CANFD Protocol, FCA AutoAuth, No Subscriptions Lifetime Update

OBD2 Bluetooth Scanner Lifetime Update: Ediag Elite offers revolutionary Advantage Lifetime Updates with unlimited access to the superior 15+ reset service, bidirectional testing and full system diagnostics.The Ediag Elite is an excellent Bluetooth OBD2 scanner diagnostic tool ideal for DIY's and private car owners.
Bidirectional Test for Quickly Locating Problems: The Bidirectional Scan tool allows you to send commands directly from your smartphone to your vehicle for active testing. This feature helps to quickly narrow down problems such as air conditioning clutches, windows, doors, sunroofs, etc., reducing diagnostic time for mechanics and helping DIY users locate faults more easily. In addition, Ediag Elite provides fault analysis and repair guidance to help you solve problems efficiently.
15+ Maintenance Resets: The current version introduces 15+ popular special features: Oil Reset, Headlight Matching, Bleeding Reset, TPMS Reset, BMS Reset, Gear Box Relearn, Throttle Learning, Injector Coding, SAS Reset and more special functions in system diagnose menu. These functions make it easy for owners to carry out the necessary maintenance and servicing, ensuring that your vehicle stays in top condition, prolonging its service life and preventing common problems and breakdowns. Note: The Special function vary by model& year, Reach us check compatibility.
Wide Compatibility CANFD & FCA Autoauth: Compatible with GM, Ford, Toyota, Chrysler, Honda, Mazda, Nissan, Mitsubishi, Hyundai, KIA with standard OBD2 port from 1996 to newer. More car brands and features will be released gradually. Newest Ediag Elite scanner supports CANFD Protocol and FCA cars. Note: Coverage may vary on different vehicle by model& year ,Please contact us to confirm compatibility before purchase.
Perfect for Monitoring The Health of Your Vehicle: Ediag Elite is designed to make vehicle maintenance simple and efficient. With intelligent Auto VIN quick recognition, it is easy to connect to your car without the need for manual input. Real-time data is visualized in a variety of formats, including graphs, numeric, meter displays and clear 4-in-1 data charts, allowing you to effortlessly monitor real-time data. Data logging/reporting is available for playback and further analysis

SaleBestseller No. 2

KINGBOLEN K7 Bidirectional Scan Tool 2026 OBD2 Scanner Bluetooth with Lifetime Updates, No Annual Fees, 31+ Resets, Component Matching, All System Diagnostic, CAN FD, FCA AutoAuth, Crankshaft Relearn

No Annual Fees & 2026 Upgraded CAN FD: Why pay $199/year or more for updates? The 2026 newest Kingbolen K7 obd2 scanner features have been upgraded to Lifetime Updates without subscription fees, saving you significant costs in the long run. K7 scan tool also adds the CAN FD protocol for the latest GM models (2019+), enabling faster data transfer, reducing the risk of undetected errors
2026 Newest Top-tier Car Scanner: Kingbolen K7 diagnostic scan tool is equipped with most capabilities for daily repair/maintenance: Wireless diagnosis via Bluetooth, Bidirectional Test, ECU Online/Offline Code, 31+ Resets, PMI for Ford, Lincoln, Mazda, Global version for 100+ brand vehicles and 17 languages, no area limit, FCA AutoAuth
OE-Level Full Systems Scan Tool: K7 professional diagnostic scanner with Auto Vin can do one-click to scan ECUs on most of vehicles, like pcm, ecm, eps, bcm, tpms, sas, a/c system... to read/clear code, view live data, freeze frame, read ecu info. 4-in-1 data stream graphics can make data viewing more intuitive. Detailed diagnostic reports will help you easily master the car situation as it can be shared by bluetooth or email! Adding workshop information can help your customers to know more
Bidirectional Test/Active Test & ECU Code: Stop guessing and start fixing. Bidirectional scan tool Kingbolen K7 can perform real active test that can send commands to the vehicle's ECU to drive the actuators to work, like window, rear mirrors, sunroof, door, solenoids, wipers, headlamp, etc, helping you quickly find out bad parts and pinpoint faulty issues. K7 bidirectional scanner will be a good choice to save money and time on car repairs when performing complex maintenance and repair
31 Reset Functions: Avoid expensive dealership visits for simple services. Experience tells us that just a small repair service may cost a lot of money. Kingbolen K7 is a professional diagnostic scanner with 31 common maintenance services like Oil /SAS/EPB/TPMS Reset, Battery Matching, ABS Bleeding, Injector Code, etc. It effectively handles most of the car reset and relearning jobs, perfect for experienced DIYers and mechanics. Note: Functions in the menu vary across vehicles. Kindly check the compatibility before purchase

SaleBestseller No. 3

KINGBOLEN OBD2 Scanner S608, 2026 Bidirectional Scan Tool for ABS/SRS/Transmission/Engine, 9 Resets Oil Brake DPF Bleed Gear Injector Throttle BMS SAS, CAN FD & FCA/Renault SGW, Lifetime Free Update

WHY S608 STANDS OUT:2026 Kingbolen S608 is the only scanner <200 bucks that offers powerful active tests on Engine, ABS, SRS, and Transmission systems. Offers 9 resets,Covers 110+ global brands with a 6.2'' larger touchscreen
KINGBOLEN'S NEW BIDIRECTIONAL SCAN TOOL: As the 2026 upgraded version of S600, our Newest S608 obd2 scanner has the powerful Bi-directional Control on Engine, ABS, SRS, and Transmission systems. It can send commands to the ECUs of actuators for functional tests and work status checks, such as ABS, fuel injectors, adjusting throttle, coolant pumps, EVAP test, fuel trim reset, etc. No more Guesswork. Quickly identify problem components without teardown, get fuss-free results in seconds.
【9 HOT RESET SERVICES CAR SCANNER】Tired of costly mechanic trips for common resets? The Kingbolen S608 obd2 scanner lets you do it yourself, even for beginners—quickly and effortlessly! It offers 9 hot reset functions: Oil/EPB Reset, ABS Bleeding, SAS Calibration, DPF Regeneration, Injector Coding, BMS Matching, Throttle Adaptation, Gear Learning. Stop paying mechanics for 5-minute jobs. Save hundreds per year! 🚗*Function vary from vehicle models. reach us to check compatibility firstly!
【4 SYSTEM DIAGNOSTIC TOOL + FULL OBDII FUNCTIONS】Kingbolen S608 is an OBDII scanner and 4 systems diagnostic tool made for home mechanics, DIYers, and professionals. You can access Engine, ABS, SRS, Transmission fault codes, track live data in graphs, and onboard DTC library lookup to find the right troubleshooting procedure, and diagnose with full 10 OBD2 test modes to fix most of emission issues. Give your aging cars routine maintenance to avoid costly repairs, a breakdown, or even a crash.
【NEW CAN FD, FCA/RENAULT SGW, 140+ BRANDS】Kingbolen S608 scanner for car supports 140+ vehicle brands, 100,000+ models, 28 languages and can be used worldwide. S608 stays up-to-date with modern vehicles, allows secure access to 2017+ FCA cars and 2015+ Renault cars (📢*Need to purchase an AutoAuth/Renault account by yourself), and supports the latest CAN-FD protocol for 2019+ GM/Chrysler, enabling 2X faster data transfer and more precise diagnostics. 🚗*Check compatibility before purchase.

This product presentation was made with AAWP plugin.

Last update on 2026-05-12 / Affiliate links / Images from Amazon Product Advertising API

Buffer Email Facebook Flipboard Hacker News LinkedIn Messenger Mix Pinterest Print Reddit SMS Telegram Tumblr X VK WhatsApp Line Xing Threads Bluesky Copy Mastodon Nextdoor