T-SB-0027-13 Service Bulletin/Repair Instructions

@TOYOTA

Technical Service Bulletin
February 8, 2013
T-SB-0027-13
Maintenance for HV & Auxiliary Batteries

Service

Category
General
Section
Pre-Delivery Service
Toyota Supports ~

ASE Certification .
USA
Market
Applicability

YEAR(S)
2014
MODEL(S)
ADDITIONAL INFORMATION
Prius , Prius C , Prius
PHV, Prius V
Introduction
Prius vehicles are equipped with 2 types of batteries:

• Hybrid Vehicle (HV) battery

•
12-volt auxiliary battery
If Prius vehicles are put into storage, the state of cha rge (SOC) of its HV battery and auxiliary

battery will gradually decrease. To prevent the auxiliary battery from becoming discharged during

storage, proper maintenance is necessary.

Please perform the following maintenance service for the HV battery and 12-volt auxiliary battery.

NOTE

• Before disconnecting the auxiliary battery, confirm the shift lever is in the "P" position and

apply the parking brake completely. The shift lever CANNOT be shifted from the " P" position

with the 12-volt auxiliary battery disconnected.

• If the negative (-) terminal of the auxiliary battery is reconnected, even if the power button is in

the " START" mode, the hybrid system may NOT start. In this case, push the " POWER" button

and select the " START" mode again to start the hybrid system (the " READY" light is ON). If the

hybrid system still does NOT start (the " READY" light is OFF), refer to the Repair Manual.
Warranty Information

OP CODE
DESCRIPTION
TIME
OFP
T1
T2
N/A
Not Applicable to Warranty
-
-
-
-
© 2013 Toyota Motor Sales, USA
Page 1 of 7
@TOYOTA
T-SB-0027-13
February 8, 2013
Page 2 of 7
Maintenance for HV & Auxiliary Batteries
Maintenance Items

CONDITION*
MAINTENANCE OPERATION
Before Delivery
Fully charge 12-volt auxiliary battery (deliver the vehicle to

the customer after it is fu lly charged 12.6 V or more).
To Store for 30 Days or More
Disconnect the negative (-) terminal of the 12-volt

auxiliary battery in the luggage compartment to prevent

the SOC of the auxiliary battery from decreasing during

storage due to parasitic current.
Just After Unloading & Every 2 Months
Keep the Hybrid System ON for 30 minutes with the

transmission in the "P" position (in order to charge the

HV battery and the auxiliary battery) .
* The condition also corresponds with the section titles within this TSB.

Required Tools & Equipment

S PE CIAL SERVICE TOOLS (SST)
PART NUMBER
QTY
GR8 Battery Diagnostic Station**
00002-MCGR8
1
NOTE

• The GR8 Battery Diagnostic Station (P/N 00002-MCGR8) supersedes the Automatic Trickle

Charger (P/N 00002-YA122-01 ) and Fast Battery Chargers (Associated P/N ASE6003 and

Christie P/N CAPPDQ). P/N 00002-YA 122-01 , ASE6003, and CAP PDQ are now obsolete.

• Additional SSTs may be ordered by calling 1-800-933-8335.

** Essential SST.
© 2013 Toyota Motor Sales, USA
@TOYOTA
February 8, 2013
T-SB-0027-13
Page 3 of 7
Maintenance for HV & Auxiliary Batteries
Before Delivery

Fully charge the 12-volt auxiliary battery :
1. Before charging the auxiliary battery, turn OFF all lights, accessories, and the hybrid system .

2. Open the back door and remove the battery cover.

3. Remove the positive(+) terminal cover.
Figure 1.
I
Positive Terminal Cover
4. Check the battery SOC.

• If the battery voltage is LESS THAN 12.6 V, then continue to step 5.

• If the battery voltage is 12.6 V or MORE, replace the positive(+) terminal cover, install

battery cover and close the back door.

NOTE

• If measuring the voltage with the negative (-) terminal connected, turn OFF the power

switch and turn ON the headlights for 20 to 30 seconds. This will remove the surface

charge from the battery.

• If the engine has been running before measuring the voltage, wait 20 minutes or more after

the engine stops. This removes the surface charge .
© 2013 Toyota Motor Sales, USA
@TOYOTA
T-SB-0027-13
February 8, 2013
Maintenance for HV & Auxiliary Batteries
Before Delivery

Fully charge the 12-volt auxiliary battery: (Continued)
5. Test/charge the 12-volt auxiliary battery using the

GR8 Battery Diagnostic Station.
Figure 2. GRS Battery Diagnostic Station
A. Connect the red charger clamp to the positive

(+) battery terminal and the black charger

clamp to the negative(-) battery terminal.

B. Plug the charger into a grounded 110-volt

nominal outlet and flip the power switch to the

"ON" position.

C. Once the charge r is properly turned ON,

perform a diagnostic charge.

The GR8 Battery Diag nostic Station will

indicate result when complete.

If the battery tests bad ("Replace Battery"),

then replace the auxiliary battery.
1
NOTE

If the auxiliary battery was stored at 32°F

(0° C) or below, charge the auxiliary battery

in a room above 32° F (0° C).
CAUTION

•
Charge in a well-ventilated area.
•
Do NOT allow sparks or fire near the

auxiliary battery.
If the GR8 Battery Diagnostic Station is NOT

available, you may charge the 12-volt battery

by cycling the vehicle on to "READY."

• Run time will vary depending on the state

of charge.

• If this method is used, you must confi rm

that the battery is charged to 12.8 volts

using a DVOM.
© 2013 Toyota Motor Sales, USA
I
P/N 00002-MCGRS
Page 4 of 7
@TOYOTA
February 8, 2013
T-SB-0027-13
Maintenance for HV & Auxiliary Batteries
Before Delivery

Fully charge the 12-volt auxiliary battery: (Continued)
6. After charging the auxiliary battery, install the

positive(+) terminal cover.
Fig u re 3.
I I

1
Pos itive Terminal Cover
7. Install the battery cover and close the back door.

To Store for 30 Days or More

Disconnect the negative (-) terminal :
1. Turn OFF all lights, accessories, and the hybrid system.

2. Open back door and remove the battery cove r

3. Disconnect the negative(-) terminal.
Figu re 4.
1
© 2013 Toyota Motor Sales, USA
I
Negative Terminal
Page 5 of 7
@TOYOTA
T-SB-0027 -13
February 8, 2013
Page 6 of 7
Maintenance for HV & Auxiliary Batteries
To Store for 30 Days or More

Disconnect the negative (- ) terminal: (Continued)
4. Install the'battery cover and close the back door.

NOTE

When it is necessary to move the vehicle, reconnect the negative (- ) terminal.

When removing the vehicle from storage , connect the negative(-) terminal:
1. Open the back door and remove the battery cover.

2. Connect the negative (-)terminal.
Figure 5.
Torque: 6.0 N*m (61 kgf*cm, 4.4 ft*lbf)
1
I
Negative Terminal
3. Install the battery cover and close the back door.

NOTE

After recharging the auxiliary battery, the hybrid system may NOT start. Follow the procedure

below to initialize the system.

• Put the shift lever in the "P" position.

• Open and close any of the doors .

• Restart the hybrid system.
© 2013 Toyota Motor Sales, USA
@TOYOTA
February 8, 2013
T-SB-0027-13
Page 7 of 7
Maintenance for HV & Auxiliary Batteries
Every Two Months

Cycle vehicle to "READY" ON:

NOTE

• When the remaining capacity of the HV battery is low, the gasoline engine automatically starts

and the HV battery is charged by the generator. The 12-volt auxiliary battery is also charged by

the HV battery regardless of the gasoline engine operation.

• Be sure to reconnect the negative (-) terminal of the auxiliary battery BEFORE performing

this procedure .
1. Park the vehicle in open air or con nect the exhaust extraction hose to the exhaust pipe.

2. Apply the parking brake.

3. With the brake pedal depressed, push the

"POWER" button and select the "START' mode

and check that the "READY" light in the meter

illuminates when the hybrid system starts (the

"READY" light is ON).
Figure 6.
"\..\ii.I~
.,..,._,,,,,,
-(READY)-
ffj

4. Turn OFF all lights and accessories.

5. Check that the shift lever is in the "P" position.

6. Keep the "READY" light on and charge the HV battery for 30 minutes.

NOTE

• If the amount of charging energy is small, the display may NOT indicate the energy flow.

• Ensure there is a sufficient amount of fuel for the vehicle to run for 30 minutes.
© 2013 Toyota Motor Sales, USA

Bestseller No. 1

KINGBOLEN Ediag Elite OBD2 Scanner Bluetooth, Bidirectional Test Scanner All System Diagnostic Tool for iOS & Android, 15+ Hot Reset, CANFD Protocol, FCA AutoAuth, No Subscriptions Lifetime Update

OBD2 Bluetooth Scanner Lifetime Update: Ediag Elite offers revolutionary Advantage Lifetime Updates with unlimited access to the superior 15+ reset service, bidirectional testing and full system diagnostics.The Ediag Elite is an excellent Bluetooth OBD2 scanner diagnostic tool ideal for DIY's and private car owners.
Bidirectional Test for Quickly Locating Problems: The Bidirectional Scan tool allows you to send commands directly from your smartphone to your vehicle for active testing. This feature helps to quickly narrow down problems such as air conditioning clutches, windows, doors, sunroofs, etc., reducing diagnostic time for mechanics and helping DIY users locate faults more easily. In addition, Ediag Elite provides fault analysis and repair guidance to help you solve problems efficiently.
15+ Maintenance Resets: The current version introduces 15+ popular special features: Oil Reset, Headlight Matching, Bleeding Reset, TPMS Reset, BMS Reset, Gear Box Relearn, Throttle Learning, Injector Coding, SAS Reset and more special functions in system diagnose menu. These functions make it easy for owners to carry out the necessary maintenance and servicing, ensuring that your vehicle stays in top condition, prolonging its service life and preventing common problems and breakdowns. Note: The Special function vary by model& year, Reach us check compatibility.
Wide Compatibility CANFD & FCA Autoauth: Compatible with GM, Ford, Toyota, Chrysler, Honda, Mazda, Nissan, Mitsubishi, Hyundai, KIA with standard OBD2 port from 1996 to newer. More car brands and features will be released gradually. Newest Ediag Elite scanner supports CANFD Protocol and FCA cars. Note: Coverage may vary on different vehicle by model& year ,Please contact us to confirm compatibility before purchase.
Perfect for Monitoring The Health of Your Vehicle: Ediag Elite is designed to make vehicle maintenance simple and efficient. With intelligent Auto VIN quick recognition, it is easy to connect to your car without the need for manual input. Real-time data is visualized in a variety of formats, including graphs, numeric, meter displays and clear 4-in-1 data charts, allowing you to effortlessly monitor real-time data. Data logging/reporting is available for playback and further analysis

SaleBestseller No. 2

KINGBOLEN K7 Bidirectional Scan Tool 2026 OBD2 Scanner Bluetooth with Lifetime Updates, No Annual Fees, 31+ Resets, Component Matching, All System Diagnostic, CAN FD, FCA AutoAuth, Crankshaft Relearn

No Annual Fees & 2026 Upgraded CAN FD: Why pay $199/year or more for updates? The 2026 newest Kingbolen K7 obd2 scanner features have been upgraded to Lifetime Updates without subscription fees, saving you significant costs in the long run. K7 scan tool also adds the CAN FD protocol for the latest GM models (2019+), enabling faster data transfer, reducing the risk of undetected errors
2026 Newest Top-tier Car Scanner: Kingbolen K7 diagnostic scan tool is equipped with most capabilities for daily repair/maintenance: Wireless diagnosis via Bluetooth, Bidirectional Test, ECU Online/Offline Code, 31+ Resets, PMI for Ford, Lincoln, Mazda, Global version for 100+ brand vehicles and 17 languages, no area limit, FCA AutoAuth
OE-Level Full Systems Scan Tool: K7 professional diagnostic scanner with Auto Vin can do one-click to scan ECUs on most of vehicles, like pcm, ecm, eps, bcm, tpms, sas, a/c system... to read/clear code, view live data, freeze frame, read ecu info. 4-in-1 data stream graphics can make data viewing more intuitive. Detailed diagnostic reports will help you easily master the car situation as it can be shared by bluetooth or email! Adding workshop information can help your customers to know more
Bidirectional Test/Active Test & ECU Code: Stop guessing and start fixing. Bidirectional scan tool Kingbolen K7 can perform real active test that can send commands to the vehicle's ECU to drive the actuators to work, like window, rear mirrors, sunroof, door, solenoids, wipers, headlamp, etc, helping you quickly find out bad parts and pinpoint faulty issues. K7 bidirectional scanner will be a good choice to save money and time on car repairs when performing complex maintenance and repair
31 Reset Functions: Avoid expensive dealership visits for simple services. Experience tells us that just a small repair service may cost a lot of money. Kingbolen K7 is a professional diagnostic scanner with 31 common maintenance services like Oil /SAS/EPB/TPMS Reset, Battery Matching, ABS Bleeding, Injector Code, etc. It effectively handles most of the car reset and relearning jobs, perfect for experienced DIYers and mechanics. Note: Functions in the menu vary across vehicles. Kindly check the compatibility before purchase

SaleBestseller No. 3

KINGBOLEN OBD2 Scanner S608, 2026 Bidirectional Scan Tool for ABS/SRS/Transmission/Engine, 9 Resets Oil Brake DPF Bleed Gear Injector Throttle BMS SAS, CAN FD & FCA/Renault SGW, Lifetime Free Update

WHY S608 STANDS OUT:2026 Kingbolen S608 is the only scanner <200 bucks that offers powerful active tests on Engine, ABS, SRS, and Transmission systems. Offers 9 resets,Covers 110+ global brands with a 6.2'' larger touchscreen
KINGBOLEN'S NEW BIDIRECTIONAL SCAN TOOL: As the 2026 upgraded version of S600, our Newest S608 obd2 scanner has the powerful Bi-directional Control on Engine, ABS, SRS, and Transmission systems. It can send commands to the ECUs of actuators for functional tests and work status checks, such as ABS, fuel injectors, adjusting throttle, coolant pumps, EVAP test, fuel trim reset, etc. No more Guesswork. Quickly identify problem components without teardown, get fuss-free results in seconds.
【9 HOT RESET SERVICES CAR SCANNER】Tired of costly mechanic trips for common resets? The Kingbolen S608 obd2 scanner lets you do it yourself, even for beginners—quickly and effortlessly! It offers 9 hot reset functions: Oil/EPB Reset, ABS Bleeding, SAS Calibration, DPF Regeneration, Injector Coding, BMS Matching, Throttle Adaptation, Gear Learning. Stop paying mechanics for 5-minute jobs. Save hundreds per year! 🚗*Function vary from vehicle models. reach us to check compatibility firstly!
【4 SYSTEM DIAGNOSTIC TOOL + FULL OBDII FUNCTIONS】Kingbolen S608 is an OBDII scanner and 4 systems diagnostic tool made for home mechanics, DIYers, and professionals. You can access Engine, ABS, SRS, Transmission fault codes, track live data in graphs, and onboard DTC library lookup to find the right troubleshooting procedure, and diagnose with full 10 OBD2 test modes to fix most of emission issues. Give your aging cars routine maintenance to avoid costly repairs, a breakdown, or even a crash.
【NEW CAN FD, FCA/RENAULT SGW, 140+ BRANDS】Kingbolen S608 scanner for car supports 140+ vehicle brands, 100,000+ models, 28 languages and can be used worldwide. S608 stays up-to-date with modern vehicles, allows secure access to 2017+ FCA cars and 2015+ Renault cars (📢*Need to purchase an AutoAuth/Renault account by yourself), and supports the latest CAN-FD protocol for 2019+ GM/Chrysler, enabling 2X faster data transfer and more precise diagnostics. 🚗*Check compatibility before purchase.

This product presentation was made with AAWP plugin.

Last update on 2026-05-13 / Affiliate links / Images from Amazon Product Advertising API

Buffer Email Facebook Flipboard Hacker News LinkedIn Messenger Mix Pinterest Print Reddit SMS Telegram Tumblr X VK WhatsApp Line Xing Threads Bluesky Copy Mastodon Nextdoor