@TOYOTA
T-58-00 78-14

Technical Se rvice Bulletin

August 8, 2014

2015 Highlander/Highlander HV Pre-Delivery Service
(PDS)
Service
Category

General

Section

Pre-Del ivery Service

Market

USA

Toyota Supports ~
ASE CertificationW

Applicability
YEAR(S)

MODEL(S)

2015

Highlander, Highlander

ADDITIONAL INFORMATION

HV

Introduction
Pre-Delivery Service (PDS) is a critica l step in satisfying your dealership's new car customers .
Customer feedback indicates the following areas deserve special attention when performing PDS :
• Ca reful inspection for paint chips/scratches and body dents/dings.
• Proper operation of electrical accessories (i nclud ing interior light, clock , and radio reset).
• Interior cleanliness.
• Proper function of mechanical systems.
Customer retention and proper maintenance of vehicles has been a major focus for Toyota . To help
rem ind customers that regular oil changes are essential to the proper maintenance of their vehicle,
dealers are required to begin installing a first oil change reminder sticker prior to delivery. By doing
this, customers will be reminded to return to your dealership for their first oil change. Your current
oil change reminder sticker may be used. (See PDS Check Sheet item 8 of "Final Inspection
& Cleaning.'}
A new PDS Check Sheet has been developed for the 2015 model year Highlander and
Highl ander HV. Some check points have been added , expanded, or clarified . Bulletins are
available for items in bold.
Warranty Policy
If the need for additional repa irs or adjustment is noted during PDS , the requi red service should be
performed under wa rranty. Reimbursement will be managed under the warranty policy.
Th e Warranty Policy and Procedures Manual requires that you maintain the completed PDS
Check Sheet in the customer's file . If you cannot produce a completed form for each reta iled
vehicle upon TMS and/or Region/Distributor audit, the PDS payment amount will be subject to debit.
A n additional Repair Ord er completed in conjunction with normal PDS must have time punch/flags
for service . If multiple repairs are performed , separate time fla gs must be punched for each repair.

© 2014 Toyota Motor Sales, USA

Page 1 of 7

@TOYOTA

Page 2 of 7

August 8, 2014

T-SB-0078-14

2015 Highlande r/Highlander HV Pre-Delivery Service (PDS)

Warranty Information
OP CODE

DESCRIPTION

0010 13

Pre-Delivery Service (PDS)

MODEL

TIME

Highlander

1.1

Highlander HV

1.5

OFP

T1

T2

-

-

-

Required Tools & Equ ipment
REQUIRED EQUIPMENT

Techstream 2.0·
Techstream Lite

SUPPLIER

ADE

PART NUMBER

QTY

TS2UNIT

1

TSLITEPDLR01

• Essential SST

NOTE
• Only ONE o f th e Techstream units listed above is requ ired.
• Software vers i on 9.10.037 or later is req uired.
• Additio nal Techstream u nits may be ordered by calling A pproved Dealer Equ ipm ent (ADE) at
1-800-368-6787.

Before Inspection

When performing new car PDS, install the Short Pin before moving the vehicle from the storage lot
so that Functiona l Operation checks can begin as soon as the vehicle is moved into the service stall.
1. Install Short Pin - see check sheet
Functional Operation

Apply the parking brake and cycle the ignitio n to "IG-ON," place the gear selector in reverse, and turn
on the lights and rear defogger. Unlock all the doors, release the fuel door, and release the back door.
1. Check dome, courtesy, map, and sun visor lights*
2. Check warning/indicator lights, gauges, and horn
3. Check windshield wipers and washers
4. Check headlights, instrument lights, turn signals, emergency flashers, and brake lights
5. Check inside/outside rear view mirror operation/adjustment
6. Check cigarette lighter* and power outlets
Check the power outlet using an electrical accessory designed for this use.

© 2014 Toyota Motor Sales, USA

@TOYOTA

T-SB-0078-14

A ugust 8, 201 4

Page 3 of 7

2015 Highlander/Highlander HV Pre-Delivery Service (PDS)

Functional Operation (Continued)

7. Check audio/navigation*/backup camera* systems and set clock
For navigation , set the destination search area to the correct location .

8. Check multi-information display
NOTE
Refer t o th e multi-information display section in the vehicle's Owne r's Manual for a
comp rehensive list of the system's functi ons and displays .

9. Install shift-lock override button cover
10. Check sliding roof*
11 . Check Rear Seat Entertainment system operation*
Walkaround Inspection

Start at left front door. Check window and door lock operation (from master power switch , if
equipped) . Continue around veh icle in a counterclockwise direction checking each door and window
operation , child door locks, seat belts, interior condition , all lights, and luggage compartment
contents. Remove rubber body plugs from glove box for installation during Under Vehicle inspection.
1. Check Smart Key System - T-SB-0024-14
2. Check door and door lock operation , including each wireless remote control/theft deterrent
system*

3. Check window operation
4. Check that engine starts with all keys

5. Check that child safety door locks are in normal (unlocked) position
6. Check seats and seat belt operation

7. Check rear defogger/rear view mirror defogger*
8. Check side marker, tail , backup, and license plate lights
9. Check luggage compartment trim appearance
10. Check headlight aim
NOTE
Refer t o the Repair Manual for procedures.

© 2014 Toyota Motor Sales, USA

@TOYOTA

T-SB-0078-14

August 8, 2014

Page 4 of 7

2015 Highlander/Highlander HV Pre-Delivery Service (PDS)

Under Hood

1. Check engine oil level
2. Check brake fl uid level
3. Check eng ine coolant level
4. Check inverter coolant level*
5. Check windshield washer fluid level
6. Check battery state-of-charge using Digital Battery System Analyzer
Refer to Service Bulletin No. PG001 -06, "Battery Maintenance for In-Stock Vehicles &
Pre-Delivery."
NOTE

•

Maintenance-free Panasonic batteries can be repl enished with distilled water.

•

Battery SOC should be a minimum of 75% . Please enter the SOC Reading on the space
provided on the check sheet and attach the printout to the check sheet.

7. Inspect for fu el, oil , coolant, and other fluid leaks
B attery Mai ntenance*

1. Perform HV battery check and maintenance - T-SB-0027-14
Under Vehicle

1. Rem ove disc brake anti-rust covers/anti-corrosion wheel film - PD017-04
Visually inspect rotors for ru st.
NOTE

For best rotor rust prevention , retain wheel film o n vehicle until just prior to customer delivery.

2. Inspect tires for defects/damage
3. Adjust spare tire pressure, inspect for damage, and check jack and tool installation
4. Initialize Tire Pressure Warning System (TPWS) - see check sheet
5. Install wheel covers/caps/spare tire wheel covers*
6. Inspect for fuel, oil , coolant, and other fluid leaks

© 2014 Toyota Motor Sales, USA

@TOYOTA

August 8, 2014

T-SB-0078-14

Page 5 of 7

2015 Highlander/Highlander HV Pre-Delivery Service (PDS)

Under Veh ic le (Cont inued)

7. Inspect under the vehicle for damage, rust, etc.
8. Visually check bolts and nuts on chassis and powertrain for looseness
9. Install rubber body plugs
Install the rubber plugs into the front and rear torque box holes.
NOTE
The t w o body plugs are stored in th e glove box.

Road Test

A complete road test helps assure customer satisfaction . Drive the vehicle over a variety of road
surfaces and driving conditions. Check for unusual noise and vehicle performance.
1. Check cold engine operation
Check starting and fast idle operation performance.
2. Check engine operation during warm-up
Check that engine operates smoothly during warm-up.
Check for unusual noise, engine vibration , rough idle, etc .
3. Check engine at normal operating temperature
Check engi ne performance over under a broad range of driving conditions, including idle quality,
acceleration , cruise, and deceleration.
4. Check transmission operation
Check transmission operation , including operation in each range, neutral start switch , and
shift lock system .
5. Check brake and parking brake operation
Check brake function, including unusual noise, parking brake performance and all related brake
system indicator lights.
6. Check steering operation and off-center/vehicle pull/flutter
Check steering function .
Check steering off-center/vehicle pull/flutter.
7. Inspect for abnormal noise and vibration

© 2014 Toyota Motor Sates, USA

@TOYOTA

August 8, 2014

T-SB-0078-14

Page 6 of 7

2015 Highlander/Highlander HV Pre-Delivery Service (PDS)

Road Test (Continued)
8. Inspect for squeaks and rattles

9. Check front and rear* heater and A/C operation
10. Check cruise control operation*
Check cruise control , including "ON-OFF," "-SET," "+RES," and "CANCEL:' functions.
11 . Check front seat heater/ven tilation operation*
12. Set/calibrate compass* - see check sheet
13. Initialize parking assist monitor system - see check sheet
Final Inspection & Cleaning
1. Remove interior protective covers, unnecessary labels, tags, etc. (Remove protective covers
just before delivery to customer.)
Remove plastic covers from door panels, seats, head restraints, and sun visors, as required.
Remove labels, tags, and stickers (except those containing owner informa tion).
NOTE

Customer information labels, such as the fuel caution, airbag warnings , and bumper labels,
MUST be left on the vehicle until delivery to a retail customer.
2. Verify floor mat application and install using retaining clips* - T-SB-0029-14
3. Visually inspect all interi or parts for installation , damage, fit, dirt, etc.
4 . Remove Rapgard™ and clear protective bumper film*
Ensure that ALL glue residue is removed.

5 . Wash and clean vehicle
6. In spect paint finish for scratches, chips, rust, dents, damage, etc.
7. Inspect exterior body parts for proper installation, damage, rust, etc.

8. Place oil change sticker on inside of windshield, top left corner
Complete the mileage or date recommendation and apply the oil change reminder sticker to the
inside of the windshield , top left corner. You may use your current oil change reminder sticker.
9. Place Owner's Guide and first aid kit portfolio* in glove box

© 201 4 Toyota Motor Sales, USA

@TOYOTA

T-SB-0078-14

August 8, 2014

Page 7 of 7

2015 Highlander/Highlander HV Pre-Delivery Service (PDS)

Final Inspection & Cleaning (Continued)

10. Install front license plate and mounting bracket* - see check sheet
11 . Perform Techstream Health Check
Perform Health Check to ensure that diagnostic tro uble codes are not present. Health Check
results can be printed for the customer at delivery, or for the dealer file, using the Diagnostic
Report function .
· Inspect or install when equipped or reqwred

© 20 14 Toyota Motor Sales, USA