Service Bulletin

Mazda North American Operations
Irvine, CA 92618-2922

© 2014 Mazda Motor of America , Inc.

Subject:

Bulletin No:

09-034/14

Last Issued:

08/15/2014

SPEEDOMETER REPLACEMENT PROCEDURE

BULLETIN NOTE
• This bulletin supersedes the previous servious bull eti ns AD-003/97 issued 02/25/97 and 09-026/04 issued on
07/01/04 . The APPLICABLE MODEL(S)NINS has been revised .
• Changes are noted below beside the change bar in Red .

APPLICABLE MODEL(S)NINS

1990-1994 323

1992-1995..929

1992-1995 MX-3

1995-2002 MiJlenia
J

'_.j

2006-2015 Mazda5
2003-2015.Mazda6
-·

2013-20 1.5 Mazda CX~ 5

1990-2003 Protege

1991-1994 Navajo

2002-2003 Protege5

1990-2006 MPV

2007-2012 Mazp;:i CX-7

1990-2005 Miata

1995-2009 8-Series

2007-2015 Mazda CX-9

1993-1995 RX-7

2001-2011 Tribute

2006-2015 Mazda MX-5

1990-1995 MX-6

2011-2014 Mazda2

2004-2011 Mazda RX-8

1990-2002 626

2004-2015 Mazda3

DESCRIPTION
In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer.
NOTE:
Mazda vehicles are manufactured with tamper-proof speedometers.
When a speedometer is replaced , the new speedometer will read zero (0) miles.
This procedure is extremely important to accurately represent actual vehicle mileage.
Prior to speedometer removal , complete the information required on the "Speedometer Replacement Label".
Labels can only be ordered through MStore, not MDCS.

Page 1of2
CONSUMER NOTICE : The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by "do-it-yourselfers." Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern . To determine if the informati on applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved . No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical--i ncluding photocopying and recording and the use of any kind of information storage and retrieval system --without permission in
writing .

Last Issued: 08/15/2014

Bulletin No: 09-034/14
© 2014 Mazda Motor of America, Inc.

REPAIR PROCEDURE
SPEEDOMETER REPLACEMENT
1. Order "Speedometer Replacement Labels" through MStore.
2. Record vehicle mileage before removing the speedometer.
3. Remove and replace the speedometer according to the appropriate workshop manual.
4. Complete the following information on the "Speedometer Replacement Label. "
a. Mileage (before speedometer replacement) .
b. Date of replacement.
c. Dealer code.

SPEEDOMETER REPLACEMENT
Mileage: _ _ _ _ _ ___,,_ _ __
(Before Replacement) · ·'

Date Replaced: _ _/_ _/_ _
Dealer Code:_ _ _ _ _ _ _ __
12S4a

Complete Information and Install
On.Driver's Side "B" Pillar .
_,
5. Attach the completed label to the driver's side "B" P.illar.

PART(S) INFORMATION

Part Number

Description

Qty ..

· Notes

9999-95-SPD0-97

Speedometer
Replacement Labels

1 (Sheet)

Order labels through MStore only.
Each sheet contains 20 labels.

Page 2 of 2