Mercedes-Benz

star bulletin

The best. or nothing.

Date:

July 8, 2014

Order No.:

S-B-00.00/98a

Supersedes:

S-B-00.00/98, March 4, 2013

Group:

00

Revision a: Renamed Section and Title of Warranty Manual.
SUBJECT:

MY-All, Models All
Test Drive Operations

Test drives that are required as part of the technical repair procedure may be claimed under
warranty I goodwill assuming that they are properly documented and technically justified. Test
drives that are performed in conjunction with the service reception and final inspection (e.g. quality
checks) are considered dealership overheads I administrative costs and they may not be claimed
under warranty I goodwill.
Examples of test drives that may be claimable are:
• Noise inspection drives
• Measuring drives
• Calibration drives
• Test drives required by specific workshop documentation
For measuring drives, the corresponding test sheet must be completely filled out and include all the
required details. Reimbursement will only occur if the measurement results confirm the customer
complaint.
Because test drive operations are considered diagnostic operations and generally do not have
established times, all time punching requirements as outlined in the NTG (No Time Given) section
of the Warranty manual must be followed. The time required when conducting the test drive, the
employees involved and the exit I entry mileage readings must be documented on the repair order.
There are a number oftest drive operation codes within groups 00, 07, 18, 27 and 94 which are
explained in greater detail below.

Measuring and calibration drives
In group 00 operation code 00-9151 is used for general road testing. For this operation code the
reasoning for the test drive must be documented on the repair order. This operation code may also
This bulletin has been created and maintained in accordance with MBUSA-SLP S423QH001, Document and Data Control, and MBUSASLP S424HH001, Control of Records.

© 2014 Mercedes-Benz USA, LLC

or in part is not permitted without authorization from the

Dealer Workshop Services

publisher. Printed in USA.

www.MBUSA.com

1-800-FOR-MERCedes

www.StarTeklnfo.com

II

All rights reserved. Reproduction or translation in whole

Mercedes-Benz Canada, Inc.

be used when there is no other test drive operation code available in the remaining groups. This
operation code cannot be combined with other operation codes for a test drive and noise
determination.
Category

p

Operation
Number
00-9151

0 peration text
Perform workshop test drive
Reasoninn: .. ; Technician: .. ; Deoarture: ... ;Arrival: ... ; StartinQ km: ... ; Endina km: ...

Fuel consumption measuring drive
For fuel consumption measurement use operation code 07-1333.
Category

p

Operation
Number
07-1333

Operation text
Determine fuel consumption (by driving on the road)
Technician: ... ; Denarture: ... ;Arrival: ... ; Startina km: ... ; Endina km: ...

Oil consumption measuring drive

For oil consumption measuring drives use operation code 18-1010.
Category

p

Operation
Number
18-1010

Operation text
Conduct oil consumotion measurinQ drive (on road)

Adaptation of automatic transmission
Operation code 27-1047 is used for adaptation of the automatic transmission. This
operation code cannot be combined with the other operation codes.
Category

p

Operation
Number
27-1047

Operation text
Conduct adaptation (after repair)
Technician: ... ; Denarture: ... ;Arrival: ... ; StartinQ km: ... ; EndinQ km: ...

Noise determination at standstill in workshop
When determining noise at a standstill in the workshop, as well as for rectifying noises,
operation code 94-1010 is used. This operation code is also to be used if minor repairs (e.g.
applying felt tape, retightening bolts) are necessary as a result of a noise inspection test
drive. In that case, 94-1010 may be claimed in combination with the corresponding noise
inspection test drive operation code (e.g. 94-1013, 94-1015 or 94-1017). The combination of
operation codes must be explained in detail on the repair order and in the claim text
otherwise the operation code may be denied. Any disassembling work conducted on the
vehicle should be claimed using the appropriate operation codes from ASRA. Operation
code 94-101 O is solely for the localization and rectification of the noise, not for
disassembling the vehicle.
Category

p

2

Operation
Number
94-1010

Operation text
Noise; location: ... Localization and rectification; Remedv: ...

S-B-00.00/98a

Test drives for noise inspection
For noise inspection test drives there are three operation codes available:
•
•
•

94-1013
94-1015
94-1017

These operation codes refer to the damage causing component (i.e. Warranty booker defines the
operation code based on the technician's findings). Operation codes 94-1013, 94-1015 and 941017 cannot be combined with each other. These operation codes are only for the reimbursement
of locating the noise, disassembly work on the vehicle must be claimed separately.
Category

p

Operation
Number
94-1013

p

94-1015

p

94-1017

Operation text
Localize noise on engine;
Test drive technician: ... ; Departure: ... ;Arrival: ... ; Startin!l km: ... ; Endin!l km: ...
Localize noise on chassis;
Test drive technician: ... ; Departure: ... ;Arrival: ... ; Startin!l km: ... ; Endin!l km: ...
Localize noise on body
Test drive technician: ... ; Departure: ... ;Arrival: ... ; Startin!l km: ... ; Endin!l km: ....

S-B-00.00/98a

II

3