NUMBER

GROUP

~ HYUnDRI I

AUTOMATIC
TRANSMISSION

nEWTHlnKlnG.
nEW POSSIBILITIES.

Technical Service Bulletin

13-AT-002
MODEL

DATE
FEBRUARY 2013

SUBJECT:

GENESIS SEDAN (BH)
GENESIS COUPE (BK)
EQUUS (VI)

AUTOMATIC TRANSMISSION
SOLENOID & SENSOR OTC P0741, P0743, P0748, P0753 ,
P0758, P075A, P0763, P0768, P0773, P2709 & P0841

This TSB supersedes TSB 12-AT-015-1 to add an Op Code for pressure switch replacement.

Description: The Genesis Sedan , Genesis Coupe and Equus are equipped with an 8-speed
transm ission. Do not replace the transmission for the OTC listed below. Instead , follow the repair
procedure and replace the related part.

Applicable Vehicles:
2012 MY - Genesis Sedan 3.8L/4 .6L/5 .0L
2013 MY - Genesis Coupe 2.0L/3.8L
2012 MY- Equus 4.6L/5.0L
OTC LIST & PARTS INFORMATION:
OTC

DESCRIPTION

PNC

PART NO.

45000

Parts catalog

P0741

Torque converter clutch circuit performance or stuck off

P0743

Torque Converter Clutch Circuit Electrical

46202A

46313-3B010

P0748

Pressure Control Solenoid Valve(VFS) A Electrical

46313A

46313-4E510

P0753

Shift Control Solenoid Valve 'A' Electrical (UD/B)

46313

46313-4 E500

P0758

Shift Control Solenoid Valve 'B' Electrical (2-6/B)

46313

46313-4E500

P075A

ON/OFF Solenoid

463130

46313-3 B030

P0763

Shift Control Solenoid Valve 'C' Electrical (35R/C)

46313C

46313-4E700

P0768

Shift Control Solenoid Valve 'D' Electrical (OD/C)

46313B

46313-4E600

P0773

Shift Control Solenoid Valve 'E' Electrical (SS-A - 27B)

46313

46313-4E500

P2709

Shift Control Solenoid Valve 'F' Electrical (SS-B)

46313A

46313-4E510

P0841

Transmission Fluid Pressure Sensor/Switch A Circuit

456620

46306-4EOOO

E-Module - BH 3.8L, BK 2.0L/3.8L

46305C

46305-4F100

E-Module - BH 4.6L/5.0L, VI 5.0L

46305C

46305-4E100

All

Circulate To: Service Manager, Warranty Manager, Service Advisors , Technicians, Fleet Repair

SUBJECT:

AUTOMATIC TRANSMISSION SOLENOID & SENSOR OTC P0741, P0743, P0748, P0753,
P0758, P075A, P0763, P0768, P0773, P2709 & P0841

WARRANTY INFORMATION-Solenoid replacement (BH & BK):
OP CODE

OPERATION

OP TIME

45600ROO

Replace valve body assy.

1.4

45600RQO

GOS Operation

0.3

CAUSAL PART

NATURE
CODE

CAUSE
CODE

46200-4E220

N69

C15

CAUSAL PART

NATURE
CODE

CAUSE
CODE

46306-4EOOO

N69

C15

WARRANTY INFORMATION - Pressure switch replacement (BH, BK & VI):
OP CODE

OPERATION

OP TIME

46306ROO

Replace pressure switch

1.5

46306RQO

GOS Operation

0.3

SERVICE PROCEDURE:

1.

Using a GOS, check for OTC in the "Automatic Transaxle" menu. Record the OTC and
description . Delete the OTC.

2.

From the GOS, select the following menus :
• Vehicle and A/T menu
• "Actuation Test"
• Press the "Start" button and look for a "Success" indication and listen for a solenoid
operation noise. If necessary, use Chassis Ears or a stethoscope.
I

Preparation

Repair
Transmission/Automatic Transaxle

Testl1ems

liM;lffltf!!JitiMi!dH!f·!(!lW
S hift Control
Shift Control
Shift Control
S hift Control

Solenoid
Solenoid
Solenoid
Solenoid

Valve
Valve
Valve
Valve

Df'&OD/Q
E(27/B)
C{35R/Q
Bf6!Q

Shift Control Solenoid Valve F(8LRfB)

Pressure Co ntrol Solenoid Valve(VFS) ~AR
To rque Converter Dutch Sole noid Valve
151Gearlamp
2nd Gear Lamp
3rdGearlllmp
4thGearhmp
5th Gear lamp
6th Gear lamp
7th Gea r Lamp
8th Ge ar l am p
ON/OFF Solenoid B(Re.,..erse) (SBW)

ON/OFF Solenoid (SBQ

• Ouralion

~
, s,-c ---J~

TSB #: 13-AT-002

• Conditions
JG. ON. ENG OFF. 'P'PANGE.
NO OTC

• Result
Success

Page 2 of 9

SUBJECT:

AUTOMATIC TRANSMISSION SOLENOID & SENSOR OTC P0741, P0743, P0748, P0753,
P0758, P075A, P0763, P0768, P0773, P2709 & P0841

3.

If the test results show:
• "Success" - The GOS requested the TCM to activate the solenoids. Use a stethoscope or
Chassis Ears to confirm the solenoid operation . If the solenoids are audible , the harness
currently has no open/short circuit. Go to Step 5.
• "Failure" - The GOS did not request the TCM to activate the solenoids. Go to Step 4.

4.

Visually check the wiring harness between the PCM and transmission for a damaged wire or
connector. Check for a open/short circuit.
• If so , repair or replace the ECM control harness and drive the vehicle to confirm the repair.
• If no damage, go to Step 6.

5.

Disconnect the negative battery terminal.

6.

Lift the vehicle on a hoist.
Press the tab in the center of the latch and
push the latch upward.
Push the connector up to disconnect the
connector.

7.

Use an 8mm or 5/16" hex socket and remove
the drain plug and drain the ATF. Reinstall the
drain plug .
Torque: 17-19 lb.ft (2.4-2 .6 kgf.m)
Remove the 14 bolts that secure the oil pan
and remove the pan.

TSB # : 13-AT-002

Page 3 of 9

SUBJECT:

8.

AUTOMATIC TRANSMISSION SOLENOID & SENSOR OTC P0741, P0743, P0748, P0753,
P0758, P075A, P0763, P0768, P0773, P2709 & P0841

Remove the 10 bolts that secure the valve
body to the case and remove the valve body.
Note the location of the 3 black long bolts.

9.

Remove 8 bolts and remove the E-module.
Install a new E-module after solenoid
replacement.
Torque : 6-7 lb.ft (0 .9-1.0 kgf.m)

10. P0841 only:
If P0841 was recorded in Step 1, disconnect
the connector and replace the pressure switch,
P/N 46306-4EOOO . Reconnect the connector.
Torque : 3-4 lb.ft (0.4-0.5 kgf.m)
If P0841 was not recorded, go to Step 11 .

TSB #: 13-AT-002

Page 4 of 9

SUBJECT:

AUTOMATIC TRANSMISSION SOLENOID & SENSOR OTC P0741, P0743, P0748, P0753,
P0758, P075A, P0763, P0768, P0773, P2709 & P0841

11. Refer to the solenoid OTC recorded in Step 1
and replace the related solenoid.
Refer to the PNC in the parts catalog.
OTC
P0753
P0768
P0763
P0773
P0758
P2709
P075A
P0743
P0748

SOLENOID
(A) UD
(0) 4&0D
(C) 35R
(E) 27
(B) 6
(F) 8LR
SS-A
DC
LP

PNC
46313
463138
46313C
46313
46313
46313A
46313D
46202A
46313A

UD
4&00
35R

27
6
8LR
SS-A
DC
LP

12. Remove two bolts and remove the solenoid
support.

13. Use a magnet to remove the pin and remove
the related solenoid.
Install a new solenoid.
Install the pin and the solenoid support.

TSB #: 13-AT-002

Page 5 of 9

SUBJECT:

AUTOMATIC TRANSMISSION SOLENOID & SENSOR OTC P0741, P0743, P0748, P0753,
P0758, P075A, P0763, P0768, P0773, P2709 & P0841

14. Use a 5mm hex socket to remove 4 bolts that
secure the support to the valve body and
remove the support.
Remove the related solenoid .
Install a new solenoid.
Install the support.

15. Install a new E-module and torque to specification (See Step 9).
Torque: 6-7 lb.ft (0.9-1.0 kgf.m)
ASSEMBLY

16. Confirm that 5 a-rings are seated in the case.

TSB #: 13-AT-002

Page 6 of 9

SUBJECT:

AUTOMATIC TRANSMISSION SOLENOID & SENSOR OTC P0741, P0743, P0748, P0753,
P0758, P075A, P0763, P0768, P0773, P2709 & P0841

17. Carefully align the manual valve to the shift
lever and install the new valve body.

18.

Install 10 bolts and torque to specification.

Install the 3 long black bolts in the correct
location .
Torque: 7.2-8.7 lb.ft (1.0-1.2 kgf.m)

19. Reconnect the harness connector and pull the latch down until it clicks (See Step 6) .
20.

Install the oil pan and torque the bolts to specification.
Torque: 10-12 lb.ft (1.4-1 .6 kgf.m)

21.

Reconnect the negative battery terminal.

TSB#: 13-AT-002

Page 7 of 9

SUBJECT:

AUTOMATIC TRANSMISSION SOLENOID & SENSOR OTC P0741, P0743, P0748, P0753,
P0758, P075A, P0763, P0768, P0773, P2709 & P0841

22 . Use an 8mm or 5/16" hex socket and remove
the fill plug and washer.
Shift into Park and lift the vehicle on a hoist.
Use a fluid pump or suction gun to add
approximately 4 quarts of SPH-IV-RR ATF
through the fill plug.

*NOTE
Use only SPH-IV-RR ATF, P/N 0023219052.

23.

Remove the overflow plug.
Start the engine .
Add approximately 4-5 additional quarts of
SPH-IV-RR ATF through the fill plug until the
ATF flows out in a thin steady stream.
Reinstall the fill plug and washer.
Torque: 27-33 lb.ft (3.7-4 .6 kgf.m)
Reinstall the overflow plug.
Torque: 16-18 lb-ft (2.3-2 .5 kgf.m)

24 . Attach a GOS and select vehicle , A/T menu, Current Data and Oil Temperature Sensor.
25 . Drive the vehicle until the ATF is at the low end of the range of 122-140°F (50-60 °C).

TSB #: 13-AT-002

Page 8 of 9

SUBJECT:

AUTOMATIC TRANSMISSION SOLENOID & SENSOR OTC P0741, P0743, P0748, P0753,
P0758, P075A, P0763, P0768, P0773, P2709 & P0841

26 . Move the shift lever to "P" and leave the
engine idling . Ra ise the vehicle on a hoist.
Remove the overflow plug . The ATF level is
correct when the ATF flows out in a steady,
thin stream.

ATF TEMPERATURE= 122-140°F (50-60°C)
SHIFT LEVER IN " P" AND ENGINE RUNNING

27 . Attach a GOS and reset the adaptive learning . Select VIN , A/T menu , "Option Treatment" and
"Resetting Auto T/A values . Follow the screen prompts.
Follow TSB 12-AT-017 to relearn the TCM .
Erase any OTC .
28 . Drive the vehicle to confirm the proper operation of the transmission .

TSB # : 13-AT-002

Page 9 of 9