NHTSA ID Number: 10059267
Manufacturer Communication Number: SB-1315
TSB/Document Date: 2016-02-24
Summary
VANHOOL: PROCEDURE ON HOW TO PROTECT CONTROL PANEL SWITCHES LOCATED IN ENGINE COMPARTMENT. *CN
SB-10059267-6151
SERVICE BULLETIN
SB1315
ADDRESSEES
: ABC Customer Care and Parts Source
Owners and operators of coaches listed under ‘Application’
VEHICLE MODEL
: CX45, TX40, TX45
SYSTEM/SUBSYSTEM
: 14.10 Electrical system – Switches
BULLETIN TYPE
: Product Improvement
DATE
: September 09th, 2015
SUBJECT
: Protection of control panel switches in engine
compartment
TERMS & CONDITIONS
: No reimbursement will be awarded for carrying out
this product improvement.
APPLICATION:
As from following units, Van Hool have moved the control panel in the engine compartment from
upon to beside the toilet service door (refer to figures 1 and 2).
Model
CX45
TX40
TX45
Figure 1: New location of control panel in
engine compartment
VIN
48523
41216
41325
Figure 2: Previous location of control panel in
engine compartment
DESCRIPTION:
1. Service records have shown that in the previous design the lower switches of the control panel
are subject to damage when someone tries to close the rear engine compartment door while
the toilet service door is still open.
2. To address this issue, installation of a guard is necessary on vehicles with the control panel
upon the toilet service door.
3. Please refer to the material list and step-by-step instructions from the procedure below if you
want to install this guard.
Continued on next page.
SB1315_USA_en_2015-09-09
Page 1 of 3
MATERIAL:
Figure 3: Guard
VH reference
11399641
•
•
Description
Guard
Qty.
1
Material may be purchased through regular channels.
Parts/Waste disposal: discard old material according to applicable environmental regulations.
PROCEDURE
1. Preparations
•
•
•
Park the coach safely, apply the parking brake, stop the engine, switch off all systems and
turn off the battery master switch.
Put a “DO NOT OPERATE” tag on the instrument panel.
Read the entire procedure before beginning to work.
WARNING!
Observe safe shop practices at all times.
2. To check condition of switches on toilet service door
1)
2)
3)
4)
Open the engine compartment door.
Make sure that the switches located on the toilet service door are working properly.
Open the toilet service door.
Check the condition of the switches and their electrical wiring (insulation, loose or oxidized
connections). Change not properly operating or corroded switches. Repair damaged
electrical wiring.
Continued on next page.
SB1315_USA_en_2015-09-09
Page 2 of 3
3. To install guard
1) Open the engine compartment door.
2) Remove the two lower fasteners of the control panel.
3) Install the guard over the lower switches as indicated in figure 4. Use the same fasteners.
Figure 4: Guard installed
Procedure complete.
DISCLAIMER:
The procedures contained herein are not exclusive. Van Hool cannot possibly know, evaluate, or
advise the transportation industry of all conceivable ways in which a procedure may be undertaken
or of the possible consequences of each such procedure. Other procedures may be as good, or
better, depending upon the particular circumstances involved.
Each carrier
who uses the procedures herein must first satisfy itself thoroughly that neither the
safety of its employees or agents, nor the safety or usefulness of any products, will be jeopardized
by any procedure selected.
INFORMATION HANDLING:
Important supplements to and modifications of the technical information not yet included in the Van
Hool manuals are communicated by means of Service Bulletins.
File the Service Bulletins at the back of your manual, in numerical order.
To make sure that you will be reminded of the Bulletins that have appeared in the meantime while
paging the manual, mark the pages concerned by hand with the Service Bulletin number.
SB1315_USA_en_2015-09-09
Page 3 of 3
- 3X Stronger than the leading full synthetic*
- 10X Better high stress performance**
- 20,000 miles between oil changes***
- Viscosity breakdown as measured in Kurt Orbahn test on 5W...
- As measured in Seq IX test under high load/torque conditions...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: SB-1315
Replacement Service Bulletin Number:
MFR Communication Date: 2015-09-09
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission
, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
- 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.