NHTSA ID Number: 10056981
Manufacturer Communication Number: SIB-10-05-14
TSB/Document Date: 2015-03-24
Summary
DETROIT: INFORMATION PROVIDED ON FOR BETTER SERVICEABILITY ALTERED STEPS ON INSTALLATION AND REMOVAL OF THE OIL COOLANT MODULE. *PE
10 05-14
1
10 05-14
SB-10056981-9409
SUBJECT
DATE
October 2014
Additions, Revisions, or Updates
Publication Number / Title
DDC-SVC-MAN-0081
DDC-SVC-MAN-0181
DDC-SVC-MAN-S181
Platform
DD Platform
EuroIV
Section Title
Removal of the Oil
Coolant Module
Installation of the Oil
Coolant Module
All information subject to change without notice.
10 05-14
Copyright © 2014 DETROIT DIESEL CORPORATION
Change
Altered steps for better serviceability.
3
2 Removal of the Oil Coolant Module
2
Removal of the Oil Coolant Module
Remove as follows:
1.
2.
3.
4.
5.
6.
7.
Shut off the engine, apply the parking brake, chock the wheels, and perform any other applicable safety steps.
Open hood.
Disconnect the batteries. Refer to the OEM procedure.
Loosen oil filter cap to allow oil to drain to the pan.
If necessary, remove the front bumper. Refer to the OEM procedure.
Drain the coolant. Refer to section "Cooling System Drain Procedure".
Remove the plug (1) on the bottom of the oil coolant module. Discard O-ring (2).
8. Remove the thermostat. Refer to section "Removal of the Engine Coolant Thermostat and Seal".
9. Remove engine harness connectors from the coolant temperature sensor, intake air temperature sensor, and throttle
valve. Cut the ties securing the harness to the oil coolant module.
NOTE: Ensure any remaining coolant is drained from the oil coolant module and from the cylinder block to
prevent coolant from contaminating the engine oil.
10. Remove the coolant crossover pipe. Refer to section "Removal of the Coolant Crossover Pipe".
11. Remove the mixer pipe, cold boost pipe and throttle valve as an assembly. Refer to section "Removal of the Intake
Throttle/EGR Mixer Assembly".
12. Loosen the clips and remove the heater, coolant recovery, and Exhaust Gas Recirculation (EGR) coolant supply hoses
from oil coolant module.
13. If equipped, inspect the coolant coupler hose for damage. Discard if damage is found.
14. If necessary, remove the air filter housing. Refer to the OEM procedure.
15. Disconnect the coolant line from the fuel module to the oil coolant module.
16. Remove the poly-V-belt from the water pump pulley. Refer to section "Removal of the Poly-V-Belts".
17. Remove the radiator support rod and bracket.
18. Remove the oil dipstick tube by removing the two bolts and bracket attaching it to the cylinder block.
19. If equipped, disconnect the block heater and cut remaining harness ties.
4
All information subject to change without notice.
Copyright © 2014 DETROIT DIESEL CORPORATION
10 05-14
10 05-14
20. If equipped, remove the harness bracket from near the bottom of the oil coolant module.
21. Remove eleven bolts securing oil coolant module to engine block
and remove oil coolant module.
NOTICE: No abrasive power tools or abrasive pads should be used on the block or module gasket surfaces.
Debris created using abrasives may enter the oil system and cause severe engine damage.
22. Inspect the mounting surface on the cylinder block for any foreign debris or remaining gasket material; wipe clean
using a shop towel. Sealing surfaces should be clean and dry.
23. Remove and discard the gasket.
24. Using a new O-ring, install the plug on the bottom of the oil coolant module. Torque to 50 N·m (37 lb·ft).
All information subject to change without notice.
10 05-14
Copyright © 2014 DETROIT DIESEL CORPORATION
5
3 Installation of the Oil Coolant Module
3
Installation of the Oil Coolant Module
Install as follows:
NOTICE: No abrasive power tools or abrasive pads should be used on the block or module gasket surfaces.
Debris created from using abrasives may enter the oil system and cause severe engine damage.
1. Inspect the mounting surface on the cylinder block for any foreign debris or remaining gasket material; wipe clean
using a shop towel. Sealing surfaces should be clean and dry.
2. Install new gasket onto guide pins on the cylinder block.
3. Install the oil coolant module onto the guide pins on the cylinder block. Install eleven bolts.
4. Torque the bolts to the following specifications using the torque sequence below:
a. 10 N·m (7 lb·ft).
b. Final torque the bolts to 60 to 65 N·m (44 to 48 lb·ft).
6
All information subject to change without notice.
Copyright © 2014 DETROIT DIESEL CORPORATION
10 05-14
10 05-14
5. If equipped, install the block heater and harness tie straps.
6. If removed, install the water pump.
a. For a standard water pump, Refer to section "Installation of the Water Pump".
b. For a variable speed water pump, Refer to section "Installation of the Variable Speed Water Pump".
7. Install the radiator support rod and bracket. Torque to 100 N·m (74 lb·ft).
8. Install the Poly-V-belt to the water pump pulley. Refer to section "Installation of the Poly-V-Belts".
9. Connect coolant line to fuel module and oil coolant module.
10. If equipped, install heater hose to oil coolant module.
NOTE: Before installing the coolant crossover pipe, check the coupler hose for damage. Replace as necessary.
11. Install the coolant crossover pipe. Refer to section "Installation of the Coolant Crossover Pipe".
12. If removed, install the air filter housing. Refer to the OEM procedure.
13. Install the mixer pipe, cold boost pipe and throttle valve as an assembly. Refer to section "Installation of the Intake
Throttle/EGR Mixer Assembly".
14. Install the thermostat to the oil coolant module with four bolts. Torque to 20 to 25 N·m (15 to 19 lb·ft).
15. If removed, install the dipstick tube and two bolts and torque to 15 N·m (11 lb·ft).
16. If removed, install the front bumper. Torque bolts to 27 N·m (20 lb·ft).
17. Torque the oil filter cap to 40 to 50 N·m (30 to 37 lb·ft).
18. Connect the batteries. Refer to the OEM procedure.
19. Tighten radiator drain fitting (refer to OEM for proper torque specifications).
20. Fill the coolant system. Refer to section "Cooling System Fill Procedure".
WARNING: ENGINE EXHAUST
To avoid injury from inhaling engine exhaust, always operate the engine in a well-ventilated area.
Engine exhaust is toxic.
All information subject to change without notice.
10 05-14
Copyright © 2014 DETROIT DIESEL CORPORATION
7
3 Installation of the Oil Coolant Module
WARNING: PERSONAL INJURY
To avoid injury before starting and running the engine, ensure the vehicle is parked on a level
surface, parking brake is set, and the wheels are blocked.
21. Start the engine and inspect for leaks.
22. Verify proper coolant level.
23. Close hood.
8
All information subject to change without notice.
Copyright © 2014 DETROIT DIESEL CORPORATION
10 05-14
- Unsurpassed freeze protection and anti-boil performance...
- Organic acid technology resists rust, scale & corrosion...
- High-quality additives protect against leaks and won’t...
- Pre-mixed orange formula is ready-to-use in a 50/50 ratio...
- 5 year/150,000 mile guarantee protects against engine...
- Formulated to replace the OEM fluid in Asian make vehicles...
- 5 year/150, 000 mile . Silicate-free, long-life, phosphate...
- The long life formula provides protection for all cooling...
- Meets the following OEM and industry specifications: JIS K...
- Note: Please check the vehicle specification before...
Last update on 2026-06-21 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: SIB-10-05-14
Replacement Service Bulletin Number:
MFR Communication Date: 2014-10-01
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE AND ENGINE COOLING:ENGINE:DIESEL
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 💯【Conta.ct us for Support Directly】If you met any issues about: Received a registered device/ Language Changing/ Function not Support/ VCI150 Blueto-oth connector malfunction/ Subscription Renewal, please conta.ct us via 📞autelsupply @outlook. com🛣️, we will provide perfect solution for you. ⚠️Note: Autel MK900BT comes with 1-Year Free Software Update, most features will remain active after update subscription expires. 1. For questions regarding updates or need more useful accessories, please conta.ct us via 📞autelsupply @outlook.com🛣️. 2. If the device fails to charge or turn on, please conta.ct us via 📞autelsupply @outlook. com🛣️, we will handle it promptly.
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW MODEL OF MK808S MK900 MX900 MK808BT MX808S】2026 newest Autel MK900BT retains all features of MK808S MX900 MX808S MK808Z MK808Z-BT MK808K-BT, while EXTRA added powerful functions (value 2000+ bucks). The Pro-level Autel MK900BT makes a big leaps: 28+➡40+, 50+➡3000+ Active Tests, 2026 NEW✅CAN FD & DOIP protocols ✅Pre&Post diagnostic report ✅WIFI Print ✅Auto VIN&Auto Scan 2.0 ✅Scan VIN/ License ✅Battery Test (Need purcha.se BT506). If found defect or us.ed, please conta-ct 📞autelsupply @outlook. com📞 get perf-ect solut.ion.
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS906 PRO】Differ from MS906BT MS906 MP808 MK808 MX808 MK808BT only 50 tests, Autel scanner MK900BT escaner automotriz professional offers 3000+ active tests, it can send command to ECUs & monitor actuators operation, quickly locating faulty components. Bidirectional scanning takes your diagnostics to the next level with menu lists 3000+ active tests, such as windows, rear mirrors, sunroof, wipers, fuel injector, coolant fans, radiator fan, AC clutch, coolant pump and more. Note: Functions are not available for all vehicles, please send vehicle VIN to us check compatibility.
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full level-up of OBD2 code reader MaxiCOM MK808S MK808 MK808Z MX808 MK808Z-BT with 28 service, Autel scan tool MK900BT/ MK900-BT offers 40+ maintenance service on 150+ brands 10,000 vehicles from 1996-2025-2026. Hottest Services like: Oil Reset, ABS Bleed, SAS Calibration, Injector Coding, SRS, Throttle Reset, Gearbox Reset, Battery Registration etc. Added 12+ advanced resets: rain slash light sensor reset, HVA.C/ SUS calibration etc. Welcome to send Vehicle Make>Model>Year>VIN>Functions you required to 📞autelsupply @ outlook . com📞 check compatibility.
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE/ AUTO VIN】2026 new release Autel MaxiCOM MK900-BT scan tool embodies all system diagnostic with its 8in display for all vehicles. Like Sna.p-on tools, it can perform ✔Read/Clear Codes✔Displays 5-in-1 Live Data✔Record & Playback Data✔Retrieve Info on all available systems like ABS ECM BCM SRS TCM etc. In addition to Auto VIN technology, Autel MK900BT adds Scan License/ Auto Scan 2.0 to identify vehicle’s VIN/ license, make, year, model, no need manual input; One-click WiFi Printing of Pre&Post comparison diagnostic reports, highlight root causes of problems.
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool supports Reading and Clearing DTCs, DTC Look Up, displaying Live Data, Freeze Frame & I/M Readiness, view vehicle information, etc., to figure out the root cause of the Check Engine Light (CEL) and turn it off, helping you catch any potential issues early and avoid excessive costs from unnecessary repairs.
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with 7 languages (English, French, Spanish, etc.) and various post-1996 OBD II protocol vehicles (Toyota
, Nissan, Honda, Ford, etc.), this OBD II scanner provides accurate and fast diagnosis for worldwide car owners. - 【FOR END USER & DIYERS】 This error code reader AL319 is “plug and play” and comes with an easy interface. Even if you’re not familiar with vehicle repair, you can quickly take control of this obd2 scanner, and get the information you want.
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check engine code reader features a patented One-Click I/M Readiness, TFT color display, built-in speaker, LED Indicator etc. The cable is long enough without being too long and getting in the way. No batteries are needed.
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the date of purchase and lifetime free update are offered by this Automobile OBDII scan tool. Welcome to contact us via Q&A, email, or hotline, and our after-sale-service team for technical support.
- 👨🎓Tips Before Order: 🚩All function are vehicle-specific - send VIN(17 digits)/Make/Model/Year & needed function via 📞auteldirect @ outlook . com📞 to check before order. 🚩Register tool: a) Follow on-screen guide; or b) Register em-ail on Autel we-b, then bind using SN(back of device) + verification code (find in tool settings or con-tact us via above em-ail). MK808BT PRO comes with ✅English, if need Spanish, please s.end device SN to add. ✅1-year war-ranty. ✅$150 worth 1yr fr-ee updates(New users: ignore renewal alerts). ⚠️📢Post-expiry: Most functions remain functional,for exclusions, refer to A+ Tips. ⚠️Fee for FCA AutoAuth Ga.teway(optional): $50/year, charged by AutoAuth,not Autel.
- 【2026 MK808BT PRO: Same as MK900BT, up of MK900 MX900 MK808S MX808S】Why pay more? 2026 MK808BT PRO functions as MK900BT and saves you 100USD. At same c0st, you now get diagnostic 8X faster and sup-port for 150+ models(1996-2026).💡Dramatically Improved: ✔️Faster & Smarter OS: Android 4.4➡ Android 11 ✔️More Services: 28+➡ 40+ ✔️Bidirectional Control: 50+➡ 3,000+ ✔️Enhanced Hardware: 1/32G➡ 4G/64G ✔️2.4GHz➡ 5G Dual WiFi ✔️Working range: 0.9m➡ 10m+ 🔋Battery test is clear on the large 7in display(BT506 required). 🔔Your Autel scanner is shipped brand new. For any issues(used, damaged, incompatible), e-m-a-il 📞auteldirect @ outlook . com📞 for priority resolution.
- 👍【New Next-Level Bidirectional Control, 50➡3000+ Tests, Covers Daily Repairs】Unlike the Autel DS708 DS808 MP808 MK808 and MX808 car diagnostic scanners, which offer only 50 functional tests, the Autel bidirectional scan tool MK808BT PRO is equipped with over 3000 active tests. These tests are widely used on car subsystems to help technicians quickly check if the car's actuators are functioning properly. Such as ABS, windows, rearview mirrors, wipers, sunroofs, fuel injectors, AC clutches, coolant fans, radiator fans, coolant pumps,etc. Tips📢: All functions are vehicle-specific, not universal to all vehicles,pls send VIN to 📞auteldirect @ outlook . com📞check compatibility before order.
- 👍【28+ Hot Services for 150+ Makes】Autel scan tool MK808BT PRO, upgraded with a BT VCI Mini(valued at 120USD), surpasses the old wired OBDII scanner MK808S MK900, by providing a convenient 33ft wireless working range, offering greater freedom and comfort compared to the 3.3ft cable limit of the MK900 MK808S MX808S car scanner. New features include VIN Check across different modules for comparison and 28+ resets, such as injector coding, ABS autobleed, Oil reset, SAS cali.bration, BMS, throttle relearn, suspension adjustments, etc. ⚠️📢Tips: Service functions are vehicle-specific, not universal to all vehicles, pls send VIN to 📞auteldirect @ outlook . com📞check compatibility before order.
- 👍【All Available Module Diagnosis - OE-Level Scanner】The OE versatile OBDII scan tool MK808BT PRO escaner para autos effectively works with all car systems: ABS, ECM, BCM, SRS, TCM,etc. It identifies vehicles via AutoVIN/manual input/select, like S.nap-on tools, it can ✔read/clear 7000+ DTCs, ✔read ECU info, ✔view 5-in-1 live data, ✔perform active tests, and ✔reset services. ✔Reports can be shared via QR-code and printed, working globally and 21+ multilingual. Supports 150+ US/EU/Asian makes, with ongoing updates from 2024 to 2026. ⚠️Note📢: The AutoVIN function usually works for post-2006 cars, depending on if the vehicle's VIN is stored in the ECU. You can always do manual input/select.
Last update on 2026-06-21 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.