ESB E101 - Remove & Replace Expiring Test Exemption Label

Page 1 of 3

SB-10056404-8360
Technical Information Bulletin
E101

Section
Miscellaneous

Subject
Replacement of Expiring Emissions Labels

Release Date
9/22/2014

Condition
Chassis have a test exemption EPA/CARB label that must be replaced with a certified EPA/CARB label because the exemption
expires on December 31, 2014.

Chassis Affected
12 T680 and T880s built between 12/02/2013 – 12/12/2013 equipped with PACCAR MX-13 EPA2013 MY2014 engines. See attached
chassis list.

Action
CAMPAIGN
Review the attached chassis list for your dealer code and schedule your customer(s) for service if their chassis is on the list. Use the
attached procedure. Review the DWWC or SIR for “Complete” next to the “E101” campaign code prior to performing this repair.
NOTE: While this campaign may be performed at a time convenient for the customer, it must be completed before December 31, 2014
in order to keep the engine in EPA/CARB compliance. Customers failing to replace the test exemption label could face fines up to
$3,750 per day, per vehicle.

https://eportal.paccar.com/dealer/uskw/en/service/enginebulletins/enginefieldservice/Pages... 10/3/2014

ESB E101 - Remove & Replace Expiring Test Exemption Label

Page 2 of 3

Warranty
There is no time or mileage limit to this campaign. Kenworth will pay for parts at dealer net plus applicable mark-up and labor:
0.3 hours labor to remove and replace the emissions label. (Use Quick Claim Code 053-XXX 0.30 hrs.).
File an additional claim for extraordinary circumstance. A quick claim for standard labor must be filed first.
CLAIM CODING
Failure Location: 053-005-001
Failure Type: 340
SRT Code: 053-XXX

Work Accomplished: 35
Responsibility Code: 01
Claim Type: C

Parts
Parts are available from PACCAR Parts. See the attached ordering procedure.

Procedure
Verification:
To qualify for the new label each engine must have at least software version RC1. To verify this, enter the chassis
number in SIR and check to see if any of the following ESBs have already been performed:
E067, E069, E071, E072, or E082.
Ordering:
See attached ordering procedure.
Installation:
1) Remove the Test Exemption EPA/CARB label from the engine’s valve cover or intake pipe. This label MUST be
removed before installing the replacement label.
2) The EPA/CARB label must be placed on the intake pipe as shown below. (Prior to 2013 this label was installed on
the engine valve cover. Since 2013, it has been located on the intake pipe).

https://eportal.paccar.com/dealer/uskw/en/service/enginebulletins/enginefieldservice/Pages... 10/3/2014

ESB E101 - Remove & Replace Expiring Test Exemption Label

Page 3 of 3

Attachments
Chassis List
Customer Letter
Procedure

Authored by: GH

Access to PACCAR’s Enterprise Portal is provided as a benefit of doing business with PACCAR. All applications and content accessed
through this system are confidential and proprietary and the property of PACCAR Inc and its suppliers, and must be kept strictly
confidential pursuant to the contract licensing such access. Disclosure, publication, release or distribution of any material found on
PACCAR systems to any person other than employees with a need to know such information is strictly prohibited. All activity on this
system is monitored. If PACCAR suspects or discovers any unauthorized activity, access may be immediately terminated without
prior notification. Violators may be subject to legal action.

© Copyright 2014 PACCAR Inc. All rights reserved. We welcome your feedback on this page. For technical questions or concerns
about this page, please contact the DealerNet Webmaster.

https://eportal.paccar.com/dealer/uskw/en/service/enginebulletins/enginefieldservice/Pages... 10/3/2014