NHTSA ID Number: 10056178
Manufacturer Communication Number: BMW
-33-01-14
TSB/Document Date: 2014-09-29
Summary
BMW
: INFORMATION PROVIDED REGARDING LIMITED INVOLVED VEHICLES ON THE IMPLEMENTING OF ORDERING PROCEDURE, FOR VIN SPECIFIC REAR AXLE. *PE UPDATED 10/24/14. *PE
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
- SB-10056178-3582.pdf (238.63 KB)
- SB-10056178-9457.pdf (107.59 KB)
- Scanner POR V2.0 with all obd2 services
- Do the scanning for engine
- Support OBDII/EOBD Ten Modes of Operation
This product presentation was made with AAWP plugin.
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: BMW
-33-01-14
Replacement Service Bulletin Number: SIB-33-01-14
MFR Communication Date: 2014-03-07
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: SUSPENSION:REAR:AXLE:NON-POWERED AXLE ASSEMBLY
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
Page 1 of 10
SI B33 01 14
Rear Axle
SB-10056178-3582
March 2014
Technical Service
This Service Information bulletin supersedes SI B33 01 14 dated February 2014.
PERFORM THE PROCEDURE OUTLINED IN THIS SERVICE INFORMATION ON ALL AFFECTED
VEHICLES BEFORE CUSTOMER DELIVERY OR THE NEXT TIME THEY ARE IN THE SHOP FOR
MAINTENANCE OR REPAIRS.
designates changes to this revision
SUBJECT
Delivery Stop/Service Action: Check Rear Axle Differential
MODEL
F15 (X5)
F30 (3 Series Sedan)
F31 (3 Series Sport Wagon)
F32 (4 Series Coupe)
F33 (4 Series Convertible)
F34 (3 Series Gran Turismo)
SITUATION 1
A Delivery Stop has been issued on certain 2014 model year F15 and F3x vehicles produced from July 2013 to
January 2014 because the final drive differential gears may not have been properly hardened.
Vehicles held at the ports of entry are being inspected and/or repaired prior to center delivery. During
this inspection and analysis of data, BMW
of North America has documented a failure rate of less than one
in two hundred.
The affected vehicles are listed in the attachment to this bulletin; they are also identified with a “Vehicle
Comment” in the DCSnet Warranty Vehicle Inquiry or ISPA as follows:
Defect Code 0033840100, Delivery Stop: Rear Axle Differential; see SI B 33 01 14
The initial limited available stock of parts is reserved for vehicles that have already been sold and are in
customers’ hands (see Situation 2). Affected vehicles in center inventory must not be retailed or delivered until
the rear differential has been replaced.
SITUATION 2
Certain 2014 model year F15 and F3x vehicles produced from July 2013 to January 2014 may have final drive
differential gears that have not been properly hardened. These vehicles have already been sold and delivered to
customers.
AFFECTED VEHICLES
This Delivery Stop/Service Action involves F15 and F3x Models produced July 2013 to January 2014
First check if a Service Action label with a code number 671 is already attached to the B-pillar.
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/16032.2.B330114... 4/24/2014
Page 2 of 10
If a code number 671 has been punched out, the Campaign has already been performed and no further action is
necessary.
Vehicles which require this Service Action to be completed will show it as “Open” when checked either in the
"Service Menu" of DCSnet (Dealer Communication System) or with the Key Reader.
PROCEDURE 1 (DELIVERY STOP, NEW VEHICLES IN-STOCK)
Replace the rear differential (Refer to Repair Instruction RA 33 10 016). The initial limited available stock of parts
is for vehicles that have already been sold and are in customers’ hands.
PROCEDURE 2 (CUSTOMER’S VEHICLES)
A certain number of miles need to accumulate before the gears show signs of wear (for example, the 310 mile
threshold).
If the vehicle has 310 miles or less:
Replace the rear differential (Refer to Repair Instruction RA 33 10 016).
If the vehicle has more than 310 miles:
The gear oil in the rear differential needs to be checked first for metallic debris/shavings
Some vehicles may need the tension
struts removed to access to the fill
plug. Remove bolts (1) and (2) to
remove the tension struts (3).
Tightening torque for M10x20 bolts:
50 Nm.
Tightening torque for M12x35 bolts:
100 Nm.
Remove the oil fill plug from the rear
differential and insert a magnet into
the fill hole (1).
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/16032.2.B330114... 4/24/2014
Page 3 of 10
The magnet needs to reach the bottom
of the inside of the diff to accurately
inspect for debris (1). *Rear
differential cover was removed for
clarity. Do Not remove the rear
differential cover.
If there is no debris (1) on the magnet,
the differential does not need to be
replaced. (A small amount of metallic
flakes may be on the magnet. This is
considered normal wear of the
differential.)
Note: Check and top the rear
differential oil after checking the
differential. Replace with a new fill
plug, P/N 33 11 7 525 064.
If the magnet is covered in metallic
debris/shavings (1), the differential
will need to be replaced. If there is no
debris, the differential does not need to
be replaced.
Note: Check and top the rear
differential oil after checking and/or
replacing the differential. Replace with
a new fill plug, P/N 33 11 7 525 064.
PARTS INFORMATION
Note: Performing a part number look-up in ETK (EPC) by VIN or model will result in the wrong rear axle
drive part number being invoiced and installed.
We have implemented a VIN-specific parts ordering process.
Plug P/N 33 11 7 525 064 is not blocked from ordering, and should only be ordered as needed. All other parts are
blocked and will be ordered for you once the below information has been provided. Please follow the ordering
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/16032.2.B330114... 4/24/2014
Page 4 of 10
procedure outlined below:
All requests must be emailed to [email protected]. The email must contain the following information or the
orders request will be cancelled:
Subject line – Rear Axle Differential
Center number and location code where the part should be delivered
Contact Information – Name, phone number
VIN – Last seven (7) digits
Stock on these parts is limited. Orders will be placed into the system between 10:00 am and 6:00 pm EST, using
the last 7 digits of the VIN as the PO. All orders will be placed as VOR in the order they are received. Orders
received after local VOR cut-off time will be shipped the following day.
Multiple requests on the same VIN will be cancelled.
Part Number
Description
Quantity
33 11 7 525 064
Plug
1
07 14 7 309 443
2 (if required)
07 11 9 907 538
Hexagon bolt M10X20
2 (if required)
33 12 7 607 158
Insert nut repair kit
1 (if required)
26 12 7 536 563
Self-locking hexagon nut
3 (if required)
Rear-axel Drives (select the part number that applies)
Part Number
Description
Quantity
33 10 7 636 992
Rear axle differential F15 N20 N55 N57T
1 (if required)
33 10 7 636 994
Rear axle differential F15 N47T
1 (if required)
33 10 7 603 748
Rear axle differential F3x
1 (if required)
33 10 7 605 589
Rear axle differential F3x
1 (if required)
Note: Rear axle drives replaced under this Service Action must be returned to the Warranty Parts Return
Center (WRPC) for inspection.
Bulk Quantity Parts - Sublet
Part Number
Description
Quantity
07 51 2 293 972
Synthetic gear oil SAF-XO
As needed
LABEL INSTRUCTIONS
This Delivery Stop/Service Action has been assigned
code number 671. After the vehicle has been checked
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/16032.2.B330114... 4/24/2014
Page 5 of 10
and/or corrected, obtain a label (SD 92-431) and:
A. Emboss your BMW
center warranty number in
the middle of the label (1);
B. Punch out code number 671 (2), printed on the
label; and
C. Affix the label to the B-pillar as shown.
If the vehicle already has a label from a previous Campaign, affix the new label next to the old one. Do not affix
one label on top of another one because a number from an underlying label could appear in the punched-out hole
of the new label.
WARRANTY INFORMATION
Reimbursement for this Service Action will be via normal claim entry utilizing the following information:
Defect Code:
00 33 84 01 00
Note: The labor operation information for this Service Action will be available with the March 2014 release of
KSD2. Until then, please use the following information:
Procedure 1 - Delivery Stop: New Vehicles In-stock
Labor Operation:
Labor Allowance:
Description:
00 61 990
See below
Replace the rear axle differential
Labor operation codes 00 61 990 is a Plus labor operation
F15
Start VIN
End VIN
Type No.
Series
Model
Lead Type
00 61 990
0C06525
--
KS43
F15
X5 35dx
N57N
KS43
29 FRU
0C24537
0C25003
KR03
F15
X5 35ix N55 KR03
28 FRU
Start VIN
End VIN
Type No. Series
Model
F147167
F147286
3D63
F30
328dx N47T 3D63
28 FRU
F477731
F477805
3A03
F30
335i N55
3A03
23 FRU
F484488
F484490
3F03
F30
Hybrid
3
N55
3F03
23 FRU
F588105
F588113
3B03
F30
335ix N55
3B03
23 FRU
F604400
F604401
3A63
F30
328i N20
3A63
23 FRU
F984331
F984346
3C43
F30
320ix N20
3C43
23 FRU
F30
Lead Type 00 61 990
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/16032.2.B330114... 4/24/2014
Page 6 of 10
J463060
J463070
3A63
F30
328i N20
3A63
23 FRU
J977870
J977998
3B43
F30
328ix N20
3B43
23 FRU
K105854
K105880
3C23
F30
328i N26
3C23
23 FRU
K130971
K131026
3B23
F30
320i N20
3B23
23 FRU
K153019
K153073
3D43
F30
328d N47T
3D43
28 FRU
NP27566
NP28433
3A67
F30
328i N20
3A63
23 FRU
NR49663
NR49674
3C27
F30
328i N26
3C23
23 FRU
NR81822
NR82315
3B47
F30
328ix N20
3B43
23 FRU
NR90471
NR91243
3B07
F30
335ix N55
3B03
23 FRU
NR97297
NR97499
3A07
F30
335i N55
3A03
23 FRU
NS06584
NS07168
3B67
F30
328ix N26
3B63
23 FRU
NS64003
NS64286
3A07
F30
335i N55
3A03
23 FRU
P458009
P458044
3B03
F30
335ix N55
3B03
23 FRU
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way, and we’ll provide a solution within 24 hours. THINKSCAN 689BT Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- [Good News] THINKSCAN 689BT is the most competitive automotive scan tool to date, offering wireless updates with no subscription fees(valued 500Buc.ks) . With all the features of THINKTOOL PD8,PRO, built on Android 10 platform with 4-core CPU, 4GB RAM
and 64GB ROM, serving up to 5X faster than older MAX/MINI
/PLUS vehicle scanners, no more slow and delayed feedbacks, it's time to update your garage tool. - [Big Money Saver] Premium THINKSCAN 689BT Wireless Diagnostic Scanner, save up to 400USD per year, includes all useful features: Full bi-directional controls, ECU coding, 34+ services, OEM all system diagnostics, Worldwide vehicles coverage, CAN FD & DoIP, FCA
AutoAuth(The 689BT only provides a login and purchase portal, and users are required to register for an FCA
account and pay a membership fee in order to perform the relevant automotive diagnostics) - [3000+ Active Tests]Active testing is one of the most useful features in automotive maintenance and greatly improves mechanic efficiency. THINKCAR 689BT bidirectional scanner can send action commends to vehicle sub-systems or components for active test without using vehicle controls. It can perform various tests such as: EVAP Test, Fuel Trim Reset, Injector Buzz Test, Window/ Mirror/ Door Lock Test, Pump and Value Tests, etc. Get functions from "Diagnose>Car Model>System>Active Test".
- [Hot Advanced Features] 689BT bidirectional tool newly adds ECU Coding, Power Balance, Flash Hidden Functions, Reset Adaptive Data, Match Replaced Components, Customize OE-Settings. Such as: 1. changing the color of interior lights 2. switching on/off the auto hold, 3. customizing dash kits 4. activating the auto side mirror folding function 5. disables auto start-stop. Note: Coding functions vary by model&year.
- 【Warm Tips】Wired THINKSCAN 689 is connected through a detachable OBDII cable, and we also have added OBD2 Extension Cable (about 60 cm/2 feet) as g ift, enabling customers handling vehicle repairs with ease. Just click "Bundles Item" above to get it.
- 【Professional Car Diagnostic Tool】Tired of renew fees? Thinkscan 689 scanner provides dealer-level advanced functions for lifetime f.r.e.e update for auto mechanics and repair shops. 34+ Services, 3000+ Active Test, ECU Coding, 140+ Brands Coverage, FCA
AutoAuth, CANFD&DOIP Protocol, Component Matching, Power Balance, V.A.G Guided, Compatible with Google Chrome integration, etc. With strong hardware backing, 64G Memory, Android 10, 4-core processors, and 4150mAh battery. Thinkscan 689 brings you the best as your daily business helper and never lets you drop the ball! - 【Over 34 Reset Service, Adaptation + Relearn + Calibration + Initialization + Matching】Made for workshops, Thinkscan 689 scanner provides 34+ services for worldwide vehicles: such as Gear/SAS/EPB/TPMS/D.P.F/I.M.M.O/BMS/ETS/Oil/Brake/AFS/GEARBOX/SUNROOF/SUS Reset, ABS Bleed, Injector coding, etc. Warm tips: Compatibility may vary on vehicles' model and year, please contact seller before purchase to make sure it works well on your cars.
- 【Real Active Test】Thinkscan 689 scan tool features over 3000+ full bi-directional control ability, to send commands to vehicle’s systems/components, to verify system input/output without using the vehicle's controls, e.g. turn on the radiator fan, modulate the throttle, open/close windows, operate mirrors, Injector Buz Test, turn on interior&exterior lights, sound horn, test door lock actuators, turn on/off front/rear side ACM Solenoid, Vehicle level position calibration, Wheel Speed Sensor Supply.
- 【Comprehensive Solutions with Advanced Features】Take your vehicle customization to the next level with the Thinkscan 689's advanced ECU coding capabilities. This scan tool provides power balance, PMI, unlock more new features and enhance performance by activating dormant functions, customizing OE settings, matching replaced components, and reprogramming adaptive data to elevate your driving experience. Note: Compatibility varies by car models, please check before order.
- 【Powerful Bidirectional Control -- Active Test】Good News! The THINKSCAN 662 obd2 scanner has bidirectional control function,which is the most popular feature among mechanics.This function is mainly used to test whether the executing components in the electronic control system can work normally,By requesting information from the vehicle's ECU or sending commands to the ECU module to execute commands and identify maintenance status,quickly locate the cause of the fault.Such as ABS,Fuel Injectors,Adjusting Throttle,Coolant Fans,Radiator Fans,Coolant Pumps,EV.AP Test, Fuel Trim Reset,Injector Buzz Test,Pump/ Value Test,etc. Effectively shorten diagnosis time and reduce diagnosis costs.
- 【Unlock Pro-Level Diagnostics With Half Costs】 THINKSCAN 662 obd2 scanner diagnostic tool Delivers Premium Scanning Power for Half the Price! The OBD2 scanner can handle common issues with ECM,TCM,ABS,SRS. It can easily read and clear fault codes, analyze data streams, and ensure quick identification of problems. THINKSCAN 662 bidirectional scan tool has 12 practical reset functions, including Airbag Reset,ABS Bleeding,BMS,Brake Reset, D.P.F,Throttle Adaptation,Injector Coding,OIL Reset,steering angle Reset,Gearbox,TPMS,and more. The car scanner diagnostic tool very suitable for DIY enthusiasts, car repair technicians, and small and medium-sized repair shops.
- 【Multi Functional Intelligent Car Scanner Diagnostic Tool】 Automatic VIN + Real-time Data + DTC Lookup + Historical Diagnostic Records: This OBD2 scanner features auto serch technology, allowing for car recognition without the need for manual input. The real-time data of the car ECU is read and displayed in the form of text or a 4-in-1 merged waveform chart. You can save, share, print or send the entire inspection report via email for analysis. Historical diagnostic reports help you quickly identify vehicle issues and understand the condition of the vehicle. The built-in 'feedback' module provides customized repair Operation recommendations from our certified professionals.
- 【Upgraded Hardware + Ergonomically Engineered】 THINKSCAN 662 OBD2 scanner has a friendly combination of touch screen and physical buttons with an ergonomic appearance for comfortable use.Experience 2x faster scans and 50% longer lifespan vs standard models.This scanner para autos boast a 4-core 1.8GHz CPU,6.2-inch HD touch screen,2GB RAM
+ 32GB ROM storage capacity,a long-lasting 4150mAh battery,Android 8 ensures lightning-fast bootup and processing.The scanner is robust with rubberized protection that you can store and use in the trunk or garage.Whether you are engaged in Home car maintenance or road rescue car repair,this car scanner can help you perfectly solve car problems. - 【Effortless Setup & Scanning - Intuitive for All Skill Levels】No More Complicated Scanners! The User Interface is as User-Friendly as THINKCAR 689BT! Truly Plug-and-Play,The downward sliding setup shortcut portal and drawer function shortcut portal make you use this scan tool as easy as using your own cell phone.The car scanner supports setup screenshot,screen recording,volume adjustment,this scan tool includes product e-manuals,instructional videos,and fault code libraries,users can check the usage guide,perfect for DIY car owners,Maintenance technician.If your father,husband,brother,boyfriend enjoys car repairs,THINKSCAN 662 is a great gift choice, and it has amazing family value.
This product presentation was made with AAWP plugin.
Last update on 2026-05-13 / Affiliate links / Images from Amazon Product Advertising API




