SB-10055490-3492
Classification:

EL14-009

Reference:

Date:

NTB14-026

April 9, 2014

2008 – 2014 ROGUE; MAIN HARNESS TO BODY HARNESS
ELECTRICAL CONNECTOR CORROSION

APPLIED VEHICLES: 2008 – 2013 Rogue (S35)
2014 Rogue Select (S35)

IF YOU CONFIRM:
An electrical issue caused by corrosion in the Main Harness to Body Harness connectors
located at the bottom of the driver side A-pillar.


Connector numbers M13 to B3 and/or M14 to B4.
NOTE:
 Examples of electrical issues that may occur are; power seat inoperative, power
windows inoperative, radio inoperative, horn sounds on its own, etc.


See Figure 1 on page 2 for connector location.

ACTIONS:
1. Preform repairs to harness connectors as needed.
2. Apply “Harness Protector” to cover the harness connectors.

IMPORTANT: The purpose of “ACTION” (above) is to give you a quick idea of the work you
will be performing. You MUST closely follow the entire Service Procedure as it contains
information that is essential to successfully completing the repair.
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/3

Main Harness to left side Body Harness connector location

Main Harness (M13) to
Body harness (B3)

Main Harness (M14) to
Body harness (B4)
Body
haness

Figure 1

SERVICE PROCEDURE

1. Inspect connectors M13, M14, B3, and B4.

2. Perform repair to the connectors as needed.


Use harness repair kit J-48817 as needed to perform repairs.
NOTE: For instructions on using harness repair kit J-48817, refer to ASIST >> TechMate >> Tech-Mate Tools & Equipment >> Harness Repair Kit User Guide.



If necessary, replace the Main Harness and/or Body Harness:
NOTE: If needed, refer to the Electronic Service Manual (ESM) for harness
replacement information.



During harness repair, cover connectors M13/B3 and M14/B4 with harness protector
(see Figure 2 on the next page).

2/3

NTB14-026

Harness
protector


During harness repair, cover
connectors M13/B3 and M14/B4
with harness protector as
shown.



Harness protector is listed in the
Parts Information.



Two protectors come in the
package, only one is needed.

Figure 2

PARTS INFORMATION
DESCRIPTION
Harness Protector
(package contains 2 protectors, only
one will be needed)

PART NUMBER

QUANTITY

24271 – ZW40A

1

CLAIMS INFORMATION
Submit a Primary Failed (PP) type line claim using the following claims coding:
DESCRIPTION
PFP
OP CODE
SYM
DIA
FRT
REPAIR WIRING HARNESS
(1)
RA16AA
ZE
62
(2)
(1) Refer to the electronic parts catalog (FAST) and use the Body harness part number
(24010-*****) as the Primary Failed Part (PFP).
(2) Straight time operation code, bill for actual clocked time only.

3/3

NTB14-026