NHTSA ID Number: 10054583
Manufacturer Communication Number: FRN-513-3
TSB/Document Date: 2014-02-06
Summary
PETERBILT
: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. INFORMATION CONCERNING THE RETRO-FIT OF ENGINE AND EMISSION RELATED PRE-PRODUCTION PARTS WITH CURRENT PRODUCTION PART. VEHICLES MANUFACTURED APRIL 27, 2012- OCTOBER 16, 2012. *JS
513-3 EPA 2013 Retrofit
Page 1 of 4
SB-10054583-8467
Repair Notice
513-3
Section
Miscellaneous
Description
EPA 2013 emissions retrofit
Release Date
10/24/2013
Introduction
This program is applicable to Peterbilt
vehicles manufactured between April 27, 2012 and October 16, 2012 with 2013 EPA compliant
emission components. This bulletin provides administrative directions to assist with retrofit of engine and emission related preproduction parts with current production parts on these vehicles. (The chassis list is attached to the bottom of this bulletin.)
Expiration Date: This emission related campaign does not expire.
Warranty
The SIR system will indicate chassis involved in this field repair with the designator “513-3” in the campaign field.
Complete the work identified on the chassis list and file a new truck claim.
For Field...
Enter...
Failure Location
999-998-997 Retrofit
Failure Type
700
Claim Type
C
Campaign Number
513-3
Labor
See labor section
https://eportal.paccar.com/dealer/uspb/en/service/vehiclebulletins/vehiclefieldrepair/Pages/513-3E... 11/7/2013
513-3 EPA 2013 Retrofit
Page 2 of 4
If the entire engine is replaced, then
Enter the old ESN and the New ESN
CCC Notes
Labor related to Cummins
and PACCAR
PX parts is to be filed through Cummins
.
Parts
HOW TO OBTAIN PARTS FOR THE VEHICLE:
See the attached parts list to determine what parts to order. The parts on this list are available from PACCAR
Parts
and will be reimbursed at Dealer Net + 30% markup.
To order parts except for the
DPF and SCR
Order via normal Dealer Order Entry (DOE)
To order the DPF and SCR
Submit a Support Link case with the subject line
reading “2013 Emission Retrofit”.
Select "I need to place and order", then
Select "Retrofit"
Enter a purchase order # and chassis # into the
body of the supportlink case.
If the chassis-parts list
indicates an engine
replacement
Contact Joe Case at Paccar
Technical Center
(360) 757-5297 to coordinate delivery of the
engine. The campaign will provide a handling fee
for the PACCAR
MX-13 engine of $1,000.
Chassis specific parts list
HOW TO RETURN PARTS:
Parts on the following table need to be returned. All other parts should be discarded.
For PACCAR
MX13 powered vehicles
Return these parts:
Ship to:
DPF
SCR
Engine
PACCAR
Technical Center
Attn: Pat Griffith
12749 Farm to Market Road
Mount Vernon, WA 98273
For Cummins
ISX and PACCAR
PX Powered vehicles
Return these parts:
Ship to:
DPF
SCR
Cummins
Technical Center
1900 McKinley Avenue
Receiving location 10
Columbus, Indiana 47201 - 6414
Attention: Shekhar Vats
The system will generate a part return tag. In addition to the return tag, each returned part needs to have this form completed and
attached. Parts need to be palletized. Do not combine shipments with other chassis or other parts for different claims.
https://eportal.paccar.com/dealer/uspb/en/service/vehiclebulletins/vehiclefieldrepair/Pages/513-3E... 11/7/2013
513-3 EPA 2013 Retrofit
Page 3 of 4
Labor
Please include the applicable SRT for the work performed:
SRT
Time (hrs)
Applies to
043-070
2.5
For each DPF or SCR R & R
045-290
21.0
For each engine R & R (which includes
additional parts such as harnesses, hvac lines,
CAC pipes)
043-985
0.5
To R&R 3 DEF lines (without fairings)
043-980
0.3
Add this time if the vehicle has fairings and the
DEF lines are being replaced
045-067
3.0
To R&R each of the harnesses listed (engine,
emission, DEF)
Labor related to Cummins
and PACCAR
PX parts is to be filed through Cummins
.
The dealer chassis list contains a column (far right) which provides an estimate of labor for each truck.
Procedure
For a Cummins
powered vehicle:
Refer to the chassis list to determine what repair will be needed.
Identify what parts will be involved in the repair.
Place orders with PACCAR
Parts for all parts shown on the parts list.
Please contact the following people and inform them when the repair is scheduled. Please have chassis number, your location,
your contact information, and the date of the scheduled repair available when making contact.
Proceed with the repair and file the vehicle parts and labor claim to Peterbilt
.
File any labor claims, for Cummins
and PACCAR
PX engine parts, through Cummins
.
For Cummins
ISX Powered vehicles
Chuck Butler
chuck.l.butler@cummins
.com
812-341-5653
For PACCAR
PX Powered vehicles
Scott Mote
scott.mote@cummins
.com
812-343-9196
Click here for the repair procedures.
For a PACCAR
MX-13 powered vehicle:
Your dealership will be contacted by Joe Case (360-757-5297) at the PACCAR
Technical Center, who will be arranging the
https://eportal.paccar.com/dealer/uspb/en/service/vehiclebulletins/vehiclefieldrepair/Pages/513-3E... 11/7/2013
513-3 EPA 2013 Retrofit
Page 4 of 4
delivery of the customer’s vehicle and the engine.
Refer to the chassis list to determine what repair will be needed.
Identify what parts will be involved in the repair.
Place orders with PACCAR
Parts for all parts shown on the parts list.
Complete the repair once all parts, engine and vehicle are available at your location.
Once repairs are complete, file parts and labor claim to Peterbilt
.
Click here for the repair procedures.
Attachments
Aftertreatment system parts return form
Customer Letter
NOTE: customer letters are only being sent to customers with Cummins
and PACCAR
PX series engines. There are (2) 587 customers
that will be contacted by Peterbilt
Division Engineering to coordinate those repairs.
Chassis list
Parts list
Access to PACCAR
’s Enterprise Portal is provided as a benefit of doing business with PACCAR
. All applications and content accessed
through this system are confidential and proprietary and the property of PACCAR
Inc and its suppliers, and must be kept strictly
confidential pursuant to the contract licensing such access. Disclosure, publication, release or distribution of any material found on
PACCAR
systems to any person other than employees with a need to know such information is strictly prohibited. All activity on this
system is monitored. If PACCAR
suspects or discovers any unauthorized activity, access may be immediately terminated without prior
notification. Violators may be subject to legal action.
© Copyright 2013 PACCAR
Inc. All rights reserved. We welcome your feedback on this page. For technical questions or concerns about
this page, please contact the DealerNet Webmaster.
https://eportal.paccar.com/dealer/uspb/en/service/vehiclebulletins/vehiclefieldrepair/Pages/513-3E... 11/7/2013
- 6X better wear protection on critical engine parts than...
- 1.3X better sludge protection than industry standards*
- 3X Stronger against viscosity breakdown than leading full...
- Protection for 10,000 miles between oil changes
- Meets or exceeds the following specifications: API SP/SN...
- Formulated for engines with 75,000 miles or more, Valvoline...
- Delivers 20% better wear protection and 15% better sludge...
- Extra detergents safeguard against friction, corrosion and...
- Advanced friction-fighting additives help maximize...
- Provides performance benefits for high mileage, new and...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
- CSC-10054583-1139.pdf (67.48 KB)
- SB-10054583-8467.pdf (85.16 KB)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: FRN-513-3
Replacement Service Bulletin Number:
MFR Communication Date: 2013-10-24
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- WHY CHOOSE THE 2025 CR MAX -Upgrade the latest diagnostic capabilities for all vehicles after 1996: upgrade to 49+maintenance services; 46 extra specific functions; real all systems/all control modules diagnose; over 40K+ bidirectional actuation tests for diagnosing all control moduels of cars; Powerful full OBD2 Functions; built-in ECU Coding for BMW
/ Audi
/ VW
/ RollsRoyce; Fr ee V.A.G Guide Function; Battery retistration for new battery adaptation and more. It covers all vehicle diagnostic services and some special professional vehicle maintenance servces, assists you to do home DIY vehicle maintenance or car repair as a pro technician. - NEWEST IN INNOVATION FULL OBD2 SERVICES- iCarsoft auto car diagnostic scanner compatible with CAN-FD, CR MAX can do it all-reads and clears trouble codes, ALL SYSTEM DIAGNOSIS such as engine, transmission, ABS and airbag etc. CR MAX code reader for all cars can perform I/M Readiness, Live Data, Freeze Frame, Vehicle Information, Monitor Test, On-Board Monitor, E vap System Test,O2 Sensor Test,DTC Library Lookup,etc. (Warm Tips: If you car is after 2023,please contact us for compatibility; 3. It comes with 16PIN OBD2 diagnostic adapter, please check your car diagnostic socket if it is 16pin socket, if your car is 14pin diagnostic socket please contact us for the solution.)
- 49 RESET+ 46 SERVICES- Performs: Oil Reset, EPB,SAS,Throttle, D-P - F, Battery, ABS, Injector, TPMS, Suspension, AC, Head Lamp, Body Stablity, Engine, Tramsmission, Airbag, Seat, Door-Win-Roof, Fuel Pump, Door, E-G- R.+21 NEWEST SERVICES( Need update scanner)-AdBlue, Clutch, Crankshaft, High Voltage Battery
, Cruise Control, NO xSensor, Rain Sensor, Stop And Start, Turbocharger, Head Up Display, Radar Camera, Vehicle Setup, Cyliner Misfire Check,Speedlimitassist, ControlUnitReset,OxygenSensor, Seatbelt. Extra 46+ extra services based on car brand.(Tips: Quantity of reset/ calibration fucitons are based on car system that your vehicle model has) - REVOLUTIONARY 40000+BIDIRECTIONAL ACTIVE TESTS: Upgraded CR Max scanner equip with numberous of actuational test items for covering all available vehicle control modules, no longer only do simple light test or window test like other scanners, performs hardware modules test and software control modules test for checking car units or new updated control moduels work well or not after maintenance/ repair/ re-installation/ control system updated (Example for Benz- Roller Sun Blind test; Backup Camera test ;Self-test; EPB test; Transport Mode test;Boost Pressure Positioner test; Fuel Pump test; AND MORE!!).(Warm tip: The available test items are based on control modules your car has)
- ECU CODING+ BATTERY REGISTRATION- Powerful ECU Coding service for BMW
/MINI
/RollsRoyce / Audi
/VW
/Seat/Skoda/Bentley
/Bugatti
/Lamborghini
, Improves Engine Power Performance and Optimizes Fuel Efficiency and Match New Hardware Unit to car and Customized a comfortable Driving Modes and Fixes & Updates Original Software Bug. The battery test function for checking car battery health, perform battery reset (BMS ) for replacing a damaged or aging car battery with a new one and register new battery to car ECU
- 【Looking for More Professional Vehicle Scan Tool?】iCarsoft E660 2026 Upgrade Version OBD2 scan tool can do it all-reads and clears trouble codes on Engine system, ABS system, Transmission system and Airbag system, And with 6 reset function. It covers more than 59 vehicle makes from 1996-2023 models ( included most USA/ Asia / EU vehicle brand) with full OBDII. (As every car model has its-owned specific car system and ECUs, not all car models have full car ECUs which may prevent the scanner from performing all listed system diagnostics or reset services. Therefore, please email to us with car VIN and services required to do scanner's services for a compatibility check before purchasing.)
- 【OE-Level 4 Systems OBD2 Scanner】iCarsoft E660 2026 Upgrade Version diagnostic scanner offers comprehensive OBDII services, allowing you to quickly scan Engine system. It supports functions such as reading and erasing codes, checking I/M readiness, viewing freeze frame data, performing O2 sensor tests, conducting on-board monitoring, testing the evap system, auto VIN retrieval, and reading both generic and specific codes, as well as DTCs and battery tests.
- 【4 Systems Diagnosis for 10000+ Vehicles】 iCarsoft E660 2026 Upgrade Version adopts unique diagnostic software, works well for most Porsche
, Benz, BMW
, US Ford
, Land Rover
, Jaguar
, Audi
, VW
, Volvo
, Honda
, Nissan
, Infiniti
, Toyota
, Lexus
, Scion
, Isuzu
, Hyundai
, Kia
, Daewoo, Mazda
, Sprinter
, Mini
, Seat, Skoda, SAAB
, EU Ford
, Holden, AUS Ford
, Acura
, Subaru
, Mitsubishi
, Dacia, Renault, Fiat
, GM, Chrysler
, Citroen, Peugeot, Opel, Smart,Suzuki
, Vauxhall, Alfa-Romeo, Lancia and etc. - 【6 Reset Services】iCarsoft E660 2026 Upgrade Version is a diagnostic tool that offers professional maintenance services, including Oil Reset, EPB, BMS, ETC, SAS, TPMS Reset. It can help you easily reset oil change indicators, recalibrate steering angle sensors, relearn replaced electric parking brake and so on. For optimal vehicle performance and maintenance convenience. (Tips: Please update the softwareafter receiving the product to obtain new service functions)
- 【118+ Real Time Record & Live Graph View】iCarsoft E660 2026 Upgrade Version can automatically record vehicle text history and identify vehicle information. Preserve real-time data information. View & Graph Live Data. Support Data Review and Print. 15 languages: English, German, Dutch, Spanish, French and so on. We promise to offer Lifetime updates (Lifetime free Update via PC), and confidence in products. We also provide 1 year warranty + extra lifetime hardware free repair if you need it in the future. We prioritize user experience & strive to meet your expectations. Please do feel free to reach out to us if you have any question or problem about the usage.
- 【All-in-One Diagnostic Tool for Porsche
+ 2 Extra Vehicle Brands】New POR V4.0 is a professional car scanner specifically engineered with dedicated software pre-installed for Porsche
. You can also download 2 additional software packages FOR FREE from 26 supported brands (e.g., for Benz, for BMW
, for Audi
, for Land Rover
).Upgraded to adopt quad-core 1.3GHz processor and HD touchscreen and professional diagnsotic OS for faster& smooth diagnsotic.LIFETIME FREE UPDATES, NO SUBSCRIPTION COST! PLEASE TELL US YOUR CAR INFORMATION TO OBTAIN A LIST OF ALL COMPATIBLE SERVICES FOR YOUR CAR FIRST (FOR EXAMPLE: BATTERY REGISTRATION FUNCTION IS NOT COMPATIBLE WITH PORSCHE
997.2) - 【29 MAINTENANCE SERVICES FOR PORSCHE
SERIES CARS】 It can perform the 29 reset service for Porsche
series cars-Oil Reset; SAS; EPB; BMS; ETC; DP ; ABS Bleeding; Injector Coding; TPMS; Air Suspension; Air Conditioner; Head Lamp; Body Stablity Control; Engine Control; Transmission; AirBag; Seat; DWR; MIS; EG; ODO; Clutch; High Voltage Battery
; Cruise Control; Radar/Camera; Vehicle Setup,etc. Up to 49 vehicle-maintenance-services for the extra 2 vehicle brands you installed (Tip: Not all services will be worked on every car mode. Some vehicle models may be lack of certain ECU-control modules to make some services may not work). - UPGRADE SERVICES: Breaks down 29 services to 234 sub-service for car owners/machinist to perform maintenance based on corresponding sub-modules! The detailed sub-service for sub-modules assist to perform precise vehicle maintenance.Improving the accuracy of car maintenance and reducing potential failure risks caused by whole-module maintenance to main modules.such as Oil Reset is refined into Reset maintenance interval/Reset service interval/Service Reset; Engine Control Reset is refined into Delete adaptation data/Short tests/System tests/Swirl-flap actuator/Bleeding high temperature coolant circuit and more.(sub-services vary based on vehicle model/year)
- 【EXTRA VEHICLE MAINTENANC SERVICES FOR SPECIFIC SYSTEMS】Have no ability to perferm calibration to special/specific systems/modules? This OBD2 scanner solve your troubles- for common systems/modules & for specific sytems/modules, assist you to perform diagnsing/calibration/reset/relearn services for non-common modules to finish your car maintenance/ diagnostic (eg: Central Computer system/module :Function activation/Multimedia interface test/AM Field Strength/Current FM Field Strength/FM Field Strength/MOST system reserve/Self-test/Deactivate Production Mode/Reset to factory settings/MOST System Test). (Tip: The services vary based on the vehicle brands)
- 【 MORE PROFESSIONAL BI-DIRECTIONAL ACTUATION TESET 】Exclusive POR V4.0 comes with powerful bidirectional testing capability,do actuaction test for deeper unit-checking after replacement or overhaul (1333 test items for Porsche
, like:Fuel high-pressure fuel injector 1-4, Empty tank, Radiator fan, OTA-FC Connectivity, backrest, Backup battery, and more; 2136 test items for Audi
; 1670 test items for Benz; 1599 test items for Volvo
; 1360 test items for VW
; 2705 test items for GM etc.). Help to check your car units work well or not after vehicle maintenance or daily car-body check, keep drives always in safety.(Warm tip:The quantity of test item is based on the units your car has)
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




