NHTSA ID Number: 10044246
Manufacturer Communication Number: FSB-255-023
TSB/Document Date: 2012-05-24
Summary
VOLVO TRUCKS
: CONNECTOR PIN, REPLACEMENT. SEVERE FRETTING DAMAGE OF THE ENGINE VARIABLE GEOMETRY TURBOCHARGER ACTUATOR (ENGINE VGT ACTUATOR) HARNESS AND TURBINE SHAFT SPEED SENSOR (TSS) CONNECTOR MAY CAUSE AN UNRELIABLE SIGNAL TO THE ENGINE VGT ACTUATOR. *JS
SB-10044246-5144
Field Service Bulletin
Trucks
Volvo Trucks North America
Greensboro, NC USA
This Field Service Bulletin replaces bulletin,
“FSB 255-023, SRA and TSS Connector
Pin Replacement”, PV729–FSB255-023_V
(USA52828) dated (04/2012).
Date
Group
No.
Release
Page
4.2012
255
023
02
1( 8 )
Connector Pin, Replacement
VN, VHD, VT, VAH
D11, D13, D16
FSB 255-023, Connector Pin, Replacement
(April 2012)
Severe fretting damage of the Engine Variable Geometry Turbocharger Actuator (Engine
VGT Actuator) harness and Turbine Shaft Speed Sensor (TSS) connectors may cause an
unreliable signal to the engine VGT Actuator on certain VOLVO VN, VHD, VT, and VAH
trucks. An unreliable signal to the engine VGT Actuator will generate Diagnostic Trouble
Codes (DTCs). If DTCs are logged and pin fretting is identified as the cause, the engine
VGT Actuator and TSS connector pin and socket contacts should be replaced. Replacement
of the pin and socket contacts will eliminate pin fretting and increase the reliability of the
signal to the engine VGT Actuator.
W2072541
Service personnel: Please circulate, read and initial
Service
Manager
Warranty
Administrator
PV729-FSB255-023_V
Workshop
Foreman
Service Technicians
USA53288
Volvo Trucks North America
Field Service Bulletin
Date
4.2012
Group
No.
Release
255
023
02
Required Parts
Connector Pin Replacement Parts
Item #
Part Number
Description
Crimp Jaw Position
1
984945
Pin, Eng VGT Actuator Conn
B
2
3963409
Socket, Eng VGT Actuator Conn
B
3
984946
Pin, TSS Connector
A
4
11039671
Socket, TSS Connector
A
5
20734499
Wire Seal, Eng VGT Actuator Conn
N/A
6
25325008
N/A
Item #
Part Number
Description
1
9808646
Extraction Tool, Engine VGT Actuator Connector
2
9809774
Extraction Tool, TSS Connector
3
88890003
Crimp Pliers
4
88890004
Crimp Jaw
Connector Pin Replacement Tools
Procedure
You must read and understand the precautions and guidelines in Service Information,
group 20, "General Safety Practices, Engine" before performing this procedure. If you
are not properly trained and certified in this procedure, ask your supervisor for training
before you perform it.
1 Raise the hood.
2 Disconnect all cables from the negative (ground) battery terminals to prevent personal
injury from electrical shock and prevent damage to electrical components.
3 Disconnect both harness couplers.
Note: The connectors shown are for reference only. Your actual configuration may be
different, depending on truck model and components.
Note: In the event the connectors or harnesses are damaged, replace engine VGT
Actuator component connector (Item 1, Figure below) with part number 984944, engine
VGT Actuator engine harness connector (Item 2) with part number 3963412, and replace
TSS engine harness connector (Item 3) with part number 984849. The TSS component
connector (Item 4) is not available as a replacement item. Replace the TSS component
connector as an assembly (see IMPACT for the appropriate part number). Additionally,
plug seal part number 970771 is required to seal any unused pin and socket locations of
the connector housings.
Page
2( 8 )
Volvo Trucks North America
Field Service Bulletin
Date
4.2012
Group
No.
Release
255
023
02
4 Remove harnesses from the mounting bracket.
W2072542
5 Remove the conduit clamps from both harness sections.
Note: The engine VGT Actuator harness connector is shown for reference only. The
procedure is the same for the TSS harness connectors.
W2072543
Page
3( 8 )
Volvo Trucks North America
Field Service Bulletin
Date
4.2012
Group
No.
Release
255
023
02
6 Using extraction tool 9808646 or 9809774, remove the defective pins from the connectors.
Note: Before removing terminals, note and document pin locations for reassembly
purposes.
W2072544
7 Cut and remove old pins from the harnesses.
W2072545
Page
4( 8 )
Volvo Trucks North America
Field Service Bulletin
Date
4.2012
Group
No.
Release
255
023
02
8 Assemble the wire and the appropriate wire seal as shown in figure below.
W2072546
9 Using a suitable wire stripper, strip 5 mm (0.2 in) of insulation from the end of each wire.
W2072547
10 Pre-assemble the appropriate pin or socket contact with stripped wire and seal.
W2072548
Page
5( 8 )
Volvo Trucks North America
Field Service Bulletin
Date
4.2012
Group
No.
Release
255
023
02
11 Using crimp pliers 88890003 and crimp jaw 88890004, crimp the pin or socket contact.
Note: See table on page 1 for the proper crimp jaw position.
W2072549
12 Insert the crimped pin or socket in the correct position of the connector.
W2072550
Page
6( 8 )
Volvo Trucks North America
Field Service Bulletin
Date
4.2012
Group
No.
Release
255
023
02
13 Install the conduit clamps.
W2072543
14 Install the harnesses onto the bracket and secure.
15 Connect the harnesses.
W2072542
16 Reconnect all previously removed cables to the negative (ground) battery terminals.
17 Lower hood.
Page
7( 8 )
Volvo Trucks North America
Field Service Bulletin
Date
4.2012
Group
No.
Release
255
023
02
Reimbursement
This repair may be eligible for reimbursement if a product failure was experienced
within time and mileage limits of the applicable Warranty coverage. Reimbursement
is obtained via the normal claim handling process.
Claim Type (used only when uploading from the Dealer Bus. Sys.)
W
Labor Code
Primary Labor Code for engine VGT Actuator or TSS Harness Pins
Replacement
25578-2-00
0.7 hrs.
Causal Part
984945
VOLVO Trucks North America engages in a continuous program of testing and evaluating to
provide the best possible product. VOLVO Trucks North America, however, is not committed
to, or liable for updating existing chassis.
Page
8( 8 )
- Formulated for engines with 75,000 miles or more, Valvoline...
- Delivers 20% better wear protection and 15% better sludge...
- Extra detergents safeguard against friction, corrosion and...
- Advanced friction-fighting additives help maximize...
- Provides performance benefits for high mileage, new and...
- Advanced protection against the four main causes of engine...
- Delivers 40% stronger wear protection than industry...
- Provides 15% better deposit defense vs. industry standards...
- Up to 2.5X better heat protection vs. industry standards to...
- Engineered for excellent low-temperature flow, reducing...
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: FSB-255-023
Replacement Service Bulletin Number:
MFR Communication Date: 2012-04-01
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE AND ENGINE COOLING:ENGINE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 【OE-Level Full System Diagnostics-Lifetime F*REE Software Updates】The VDIAGTOOL D200 OBD2 Scanner for cars is a all system bidirectional scan tool that enjoy lifetime f*ree software updates, delivers complete system coverage. reading/clearing codes across engine, transmission, ABS, SAS, EPB, TPMS plus full access to body, chassis, powertrain and all control modules. This D200 Bidirectional car scanner works with most 1996+ OBD2 gasoline and hybrid
cars and light trucks. It does NOT support pure electric and heavy-duty trucks. PLEASE CHECK COMPATIBILITY BEFORE ORDERING or Contact us with VIN to confirm compatibility. - 【Supports OBD2 Full Functions-ZERO Subscription Fees】D200 Bidirectional OBD2 Scanner is a upgarde of universal car code reader. It supports OBD2 full functions to help you turn off the annoying instrument fault indicator, such as read/clear codes, O2 sensor test, I/M readiness, on-board monitor test, datastream, freeze frame, E-VAP system test, and retrieve vehicle information. This professional obd2 scanner diagnostic tool can full access to diagnostics, reset tools and maintenance features with a single payment. NOTE: The fault code can only be cleared after the vehicle's malfunction has been repaired; please ensure the vehicle issue is fixed before clearing the code.
- 【D200 Hidden 2 Advantages: 1. $169 Expandable 49+ Advanced Resets. 2. $199 Get J2534 P*a*s*s-Thru Programming】Your core car diagnostics and 26 reset remain lifetime f*ree for everyday maintenance. When you need deeper repair capability, upgrade with 3-year access for $169 in Store on VDIAGTOOL App, gaining 49+ advanced resets. D200 configured with J2534 hardware, upgrade only when you need without replacing the entire device. You also can Lifetime Unlock for $199 in Store one-time, perform module programming, software re~flashing and ECU data updates directly. Supports 17+ major brands, including for BMW, for Audi, for GM, for Ford and more. Note:D200 does‘t provide any OE software.
- 【Full Bidirectional Control / Active Tests】The D200 car scanner diagnostic tool is a true bidirectional scan tool that lets you send commands directly to the vehicle’s ECU for active tests. Quickly test fuel pumps, relays, solenoids, injectors, cooling fans, windows, sunroofs and more to verify operation instantly. Get dealership-level diagnostic control at a fraction of the cost (ofter $100-200$ per diagnostic visit), reduce guessworkand confirm repairs faster, avoid unnecessary parts replacement, towing fees and wait times.
- 【26 F*ree Essential Reset & Relearn Functions – Everyday Maintenance Made Easy】Handle common maintenance and repair jobs without visiting the shop. The D200 code readers & scan tools includes 26 f*ree high-demand reset functions, including Oil Reset, EPB Service, SAS Calibration, ABS Brake Bleeding, Throttle Relearn, Injector Coding, Headlight Adjustment, Tire Size Reset and more. Perfect for home car owners, mechanics and DIYers – just plug and diagnose anytime, anywhere! Note: Service functions vary by vehicle model—please confirm compatibility.
- 【A MUST-HAVE TOOL FOR DIYERS】 - VDIAGTOOL VD10 car code reader is an incredibly useful obd scanner for each car owner or hobbyist, even for those with little to no experience when it comes to vehicle mechanics! Similar to a fixd car diagnostic tool, using this car diagnostic scanner is extremely easy. All you have to do is attach it to your car OBDII port and you can diagnose car problems in seconds! Read Codes (DTCs); Clear Codes; Live Data; View Freeze Frame; I/M Readiness; Vehicle Information.
- 【KEEP ENGINE IN GOOD STATUS】 - VDIAGTOOL check engine code reader brings a fast access to scan, read the car fault code, show its definition on the screen instantly, troubleshooting to find the root causes of problems, erase the engine fault code and turn off the MIL (Malfunction Indicator Light). Similar to a fixd car diagnostic tool, this car code reader helps ensure your engine stays in top condition.
- 【READ/CLEAR CODES & DTC LOOKUP】- No search online & saving your time, this vehicle car code reader retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, pending codes and displays DTC definitions based on the built-in database(more than 3000 codes) on the TFT screen, find out the root causes and clear the codes after fixed.
- 【LIVE DATA & RETRIEVE FREEZE FRAME】 - This diagnostic scan tool for accurate diagnosis enables you to retrieve data from vehicle sensors, such as Engine RPM, Intake air temperature, Short/Long term fuel, Misfire data and etc. The freeze frame is stored in the PCM together with the diagnostic trouble code (DTC) related to the fault. Comparable to a fixd car diagnostic tool, the VD10 car code reader car scanner can be a valuable & practical diagnostic aid and also greatly help when diagnosing intermittent problems.
- 【I/M READINESS for THE S-nn-0-g CHECK】- OBDII vehicle may not pass the annual inspection unless the required monitors since reset are complete. So you should at least read the readiness monitors and make sure they are ready. This car obd2 scanner diagnostic tool is equipped with I/M readiness function to check the operations of the e-m-issi0n system on OBD2 compliant vehicles, run I/M monitor readiness test, checking if the pass vehicle s-m-0-g inspection.
- Pro Features, Home Mechanic Budget: Why pay thousands for factory scan tool? The VD70S scan tool delivers advanced professional diagnostic at an affordable price, including 10x faster 33-66ft wireless scanning, 4000+ active tests, 36+ hot services, ECU coding, PMI function, and OE-level full-system scan with 8-in-one data graph. It rivals expensive shop tools - perfect for DIYer, technician and small shop. Get dealer-grade power without the cost - the VD70S obd2 scanner diagnostic tool makes pro diagnostic accessible to all. The available function tests vary by model—please check compatibility via vdiagtool2 @ outlook . c o m before purchase
- Full Bidirectional Control for Precision Repair: VD70S obd2 scanner gives you direct vehicle module control to test components like fuel pump, injector, A/C clutch, window and more, enabling you to accurately and quickly locate faulty components. Unlike basic obd2 code reader, our advanced bidirectional control lets you actively command system - like triggering the ABS pump to confirm your fix worked. With pinpoint component testing and real-time validation, you can diagnose intermittent issues faster and prevent costly return visits. The VD70S auto diagnostic scanner transforms complex diagnostic into precise, time-saving repair - giving professional-grade accuracy at an unbeatable value
- 33-66FT Wireless Freedom - Faster & More Stable: Say goodbye to 2M cable limits. Easily Perform bi-directional tests like folding mirror, activating light or fuel pump while walking freely around your vehicle - no more cable dragging or repositioning your tool. Unlike other 33ft BT obd2 scanner that still need a cable to handle DOIP vehicle diagnostics, the VD70S bidirectional scan tool delivers a truly cable-free experience - with up to 66ft stable transmission range and faster, more reliable data transfer. With VD70S scanner, you get pro-level flexibility, faster workflow and stable diagnostics without cable clutter or wireless dropouts
- Powerful & Affordable Auto Scanner with 36+ Special Functions: Take control of your vehicle maintenance and save hundreds in shop fees with the VD70S car diagnostic tool. This car tool performs 36+ hot services including ✔Crank Sensor Relearn, Oil Reset, EPB, TPMS Reset, Throttle Adaptation, Injector Coding, ABS Bleed and more. ✔Besides, the VD70S bidirectional obd2 scanner unlocks 100+ advanced vehicle-specific functions under specific system menu, including Idle Relearn, VIN Write, Crankshaft Sensor Relearn, Fuel Trim Reset, ABS Initialization and more. These features help you solve complex system error and restore optimal vehicle performance. Text us your VIN we’ll check the compatibility
- OE-Level Full System Diagnostic, Simplified Workflow: The VD70S car diagnostic scanner delivers OE-level full system scanning (ABS/ECM/BCM/SRS/TCM and more) without the dealership cost. ✔Easily view 8 live data streams, retrieve freeze frame and run active test to quickly identify problem. ✔With advanced bidirectional control, test components like fuel injector and sensor directly to verify repair with certainty. ✔The 8-in-one graphing tracks performance trend to catch intermittent issue like a pro. Whether you're a technician or car owner, the diagnostic scanner provides shop-quality diagnostic to optimize performance and prevent costly repair - all in one affordable tool
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.