NHTSA ID Number: 10044133
Manufacturer Communication Number: SC-390120008.01
TSB/Document Date: 2012-05-15
Summary
FISKER
: SOFTWARE UPDATE WITHOUT REPLACING ECU. *PE
SB-10044133-3949
CAMPAIGN
FISKER AUTOMOTIVE, INC.
NUMBER: 390120008.01
MODEL: Karma
DATE: January 27, 2012
MODEL YEAR: 2012
TITLE: Baseline 613.5 Release
PRIORITY:
Vehicle in Shop
MARKET REGION:
U.S., Canada, Europe
PURPOSE:
Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration
updates for specific vehicle models/ECUs are released as field-fix procedures described in individual
service bulletins.
This bulletin will be used as a reference guide for technicians to update a vehicle to Baseline 613.5 by
listing software ID numbers as well as the required flash files necessary to update an ECU. A baseline
update may only require that certain ECUs to be updated. Using this guide, the technician can determine
what ECUs have updates and those that do not require it.
CHANGES:
Battery Energy Control Module (BECM) – Resolves potential intermittent charging issues caused by noise
in the electrical circuit of the charging source. This update will also prevent P262B, U019B, P0D22, and
P0C43 DTCs from setting invalid fault codes. With the new software, the HV battery’s internal clock will
sync itself with the GPS clock every 5 minutes to ensure its accuracy, resolving valid P262B trouble codes
being set.
Power Inverter Module – Generator (PIM GEN) – Changes include: Generator speed controller calibration
parameter change to reduce engine oscillation issue. Additionally, the software version ID number has
been updated.
OVERVIEW:
1. Baseline 613.5 ECU Software Version Identification Chart
2. Preparing the Vehicle for ECU Flash Reprogramming
3. Connecting the Fisker Scan Tool and Updating Diagnostic Data
4. BECM Flash Procedure (Baseline 613.5)
5. PIM GEN Flash Procedure (Baseline 613.5)
6. Post ECU Flash Reprogramming Procedure
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 1 of 15
Printed: January 27, 2012
CAMPAIGN
FISKER AUTOMOTIVE, INC.
NUMBER: 390120008.01
MODEL: Karma
DATE: January 27, 2012
MODEL YEAR: 2012
TITLE: Baseline 613.5 Release
VIN: All vehicles with Baseline 613
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 2 of 15
Printed: January 27, 2012
CAMPAIGN
FISKER AUTOMOTIVE, INC.
NUMBER: 390120008.01
MODEL: Karma
DATE: January 27, 2012
MODEL YEAR: 2012
TITLE: Baseline 613.5 Release
Baseline 613.5 ECU Software Identification Number
VGM
Software Version
(BL613.5)
0350-04-00
VCM
0002-05-02
CIU
05.02.07.00
(Check TPI Screen)
TPI
0031-01-11
DIS
0041-01-33
EPB
0061-00-02
EBCM T1
0070-03-04
EBCM T3
0071-03-08
HCU
0111-04-0A
HCU – EV
0116-00-01
0121-05-00
BECM (Updated)
0156-00-16
PIM_TM1
0281-06-06
PIM_TM2
0291-06-06
PIM_GEN (Updated)
0301-06-08
APM
0311-01-00
ECU
NOTE: The BECM and PIM GEN are the only ECUs updated in Baseline 613.5. If the ECU Software
Version IDs on the vehicle match the table above; it is not necessary to flash the other ECUs again.
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 3 of 15
Printed: January 27, 2012
CAMPAIGN
FISKER AUTOMOTIVE, INC.
NUMBER: 390120008.01
MODEL: Karma
DATE: January 27, 2012
MODEL YEAR: 2012
TITLE: Baseline 613.5 Release
Preparing the Vehicle for ECU Flash Reprogramming
NOTE: Battery voltage must be maintained between 12.2 and 16 volts while flashing an ECU.
2a. Disconnect the vehicle from the High Voltage wall charger
2b. Verify the vehicle’s 12 volt battery is at or above 12.2 volts before proceeding.
– If the low-voltage Battery is not at least 12.2 volts, you must charge battery. Connect the
positive lead of the Midtronics MDX series tester (or equivalent) to the B+ positive post at the
Power Distribution Center (PDC) with Fisker Special Tool FST9001 – Battery Charging Terminal Adaptor (to be used for all electrical system testing and charging). Connect the – Negative lead to the Accessory Power Module (APM) ground terminal.
FST9001 - Battery Charging Terminal Adaptor (red arrow) installed on the B+ post in the PDC.
Negative chassis ground (red arrow) location on Accessory Power Module (APM).
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 4 of 15
Printed: January 27, 2012
CAMPAIGN
FISKER AUTOMOTIVE, INC.
NUMBER: 390120008.01
MODEL: Karma
DATE: January 27, 2012
MODEL YEAR: 2012
TITLE: Baseline 613.5 Release
NOTE: Battery voltage must be maintained between 12.2 and 16 volts while flashing.
2c. Before ECU flash reprogramming can be started; the vehicle must be in the ACC – Accessory
mode.
– With the vehicle completely off, press the SSB – Start/Stop Button once. The SSB
backlighting will turn amber and the DIS will display “ACC.”
2d. When the ECU is being reprogrammed; the vehicle must be prevented from going into Sleep
mode. This can be accomplished simply by turning on the Hazard Warning Lights.
NOTE: If the vehicle goes into sleep mode while the ECU is being reprogrammed; the reprogramming
may be unsuccessful and can potentially damage the ECU.
Connecting the Fisker Scan Tool and Updating Diagnostic Data
3a. Connect the WDI to the Data Link Connector (DLC) located underneath the Driver’s side dash.
Then connect the WDI to the Fisker laptop with the provided USB cable.
NOTE: The laptop will automatically install the drivers needed. Please wait for this to finish before
continuing.
NOTE: It is highly recommended to use the USB when flash reprogramming the ECU. It is faster and
more reliable than using the Bluetooth connection.
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 5 of 15
Printed: January 27, 2012
CAMPAIGN
FISKER AUTOMOTIVE, INC.
NUMBER: 390120008.01
MODEL: Karma
DATE: January 27, 2012
MODEL YEAR: 2012
TITLE: Baseline 613.5 Release
3b. Before ECU flash reprogramming, ensure your laptop is updated with the latest diagnostic data
package/ECU software.
3c. Open the FiskerWT software. Update by clicking the “Add New Diagnostic Package” Icon from
the main screen.
3d. Press the “Download ODX” Button. This will open a window showing the download progress.
Please wait until the download is complete before continuing.
3e. Next press the “Download Descriptors” button. After the dialog box dismisses, a number of
deliverables should be shown on the left side.
3f. Select the descriptor that you want to install and select the “Download” button. This will open a
window showing the download progress. Please wait until the download is complete before
continuing.
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 6 of 15
Printed: January 27, 2012
CAMPAIGN
FISKER AUTOMOTIVE, INC.
NUMBER: 390120008.01
MODEL: Karma
DATE: January 27, 2012
MODEL YEAR: 2012
TITLE: Baseline 613.5 Release
3g. After the download of the deliverable is complete, select the “Install” button or double click on
the deliverable. As a result, the deliverable will be shown on the right hand side, indicating it is
installed to the laptop.
NOTE: It is recommended to perform this update procedure constantly as new diagnostic packages will
be released frequently. Completing this procedure before using the Fisker scan tool ensures that you
have the latest data available.
3h. Select Back Action to return to the main menu once the update is complete.
3i. Select “user, default” to move on to the MDI Configuration screen.
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 7 of 15
Printed: January 27, 2012
CAMPAIGN
FISKER AUTOMOTIVE, INC.
NUMBER: 390120008.01
MODEL: Karma
DATE: January 27, 2012
MODEL YEAR: 2012
TITLE: Baseline 613.5 Release
3j. Select WDI (Connection Type - USB) by clicking on it once. When the gray box turns green, the
WDI is ready to use.
NOTE: There may be new firmware to install depending on when you have last connected. By selecting
the WDI connected via the USB cable, any new firmware will install automatically. When the installation
is complete, the MDI selection menu will refresh automatically.
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: SC-390120008.01
Replacement Service Bulletin Number:
MFR Communication Date: 2012-01-27
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM:SOFTWARE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [2026 Top-Tier Hardware and Software Upgrade]: Topdon ArtiDiag900 Lite scanner has enhanced hardware and latest features, including Android 11.0, 5x faster CPU, 10000mAh battery for 12 hours of continuous operation, stable wireless diagnosis with Bluetooth 5.0, 8-inch touchscreen. Added bi-directional control, wireless diagnosis, battery testing (optional), and DTC repair guide
- [TOPDON Bidirectional Scan Tool]: This bidirectional obd2 scanner sends commands to the vehicle's ECU for active testing, enabling users to accurately and quickly locate faulty components such as injectors, coolant pumps, windows, wipers, headlights, mirrors, etc. The bidirectional control scanner is the ideal choice for workshops/automotive repair shops as it significantly reduces mechanic's diagnostic time.
- [Wireless Bluetooth Diagnostic Experience]: The AD900 Lite scan tool comes with a Bluetooth 5.0 VCI, supporting a wireless diagnostic range of up to 33 feet (10 meters), allowing you to diagnose without being confined to cables or tight spaces. Stable and fast wireless diagnosis provides a comfortable repair environment. It also offers VCI cables to increase connectivity options.
- [DTC Repair Guide Function]: Easily diagnose issues with your vehicle and receive guidance on repairs with the topdon scan tool's fault code definitions for all systems,maximize your diagnostic capabilities. This function is compatible with Chrysler
/Dodge/Jeep/Fiat 2010-2014 and expanding with continual updates,the AritDiag 900 Lite car diagnostic scanner is the must-have tool for any technician or DIY enthusiast. - [OE-Level Full System Diagnostics]:AritDiag900 Lite full system diagnostic scanner can scan ALL available modules(Engine, Transmission, Airbag, ABS, ESP, TPMS, Gateway, Steering, Radio, Air conditioning, ect.) to✔read ECU info, ✔read/clear codes, ✔view live data stream, ✔retrieves freeze-frame, ✔perform active tests, and more. With just a simple click, it provides you with accurate and in-depth diagnostics.
- Bi-Directional Control, Quickly Locate Problems: Turn your phone into a professional diagnostic tool. You can send commands from your phone to the ECU to test injectors, cooling fans, headlights, A/C clutch, windows, wipers, and more. See which one doesn't respond. Helps you quickly locate the problem and save time. No need to tear things apart, avoid blind disassembly.
- Flexible Subscription, Choose Advanced Features as Needed: TopScan Lite provides free-for-life access to core diagnostics, including full system scan, code reading, performance tests, and repair information. After purchase, advanced features (bi-directional control, service operations, live data, code clearing, and AI functions) are free-for-the-first-year. After the first year, if you want to use advanced features, you need to subscribe on a monthly, quarterly, or yearly basis. As new models and reset functions are updated, the tool will also be continuously upgraded.
- Full System Diagnostics, No Fault Hides: Unlike basic diagnostic tools that only cover 4 systems, TopScan can scan all systems. Read and clear trouble codes, view live data streams, and generate a complete vehicle health report – all issues are clear at a glance. Covers 10,000+ vehicle models and is compatible with 99.99% of vehicles.
- AI Assistant - TopFix: Think of TopFix as your personal AI mechanic. It leverages a repair database and OEM data to deliver clear, step-by-step repair solutions. Features include AI Q&A, one-click translation, and a full repair log, making your diagnostic process simpler and more efficient.
- 8+ Hot Resets, Keep Your Car in Top Shape: One-tap resets for oil, throttle, EPB, steering angle, DPF, ABS, BMS, and airbag. It enables car owners to easily perform essential maintenance, ensuring the vehicle stays in optimal condition and extends its service life.
- Dual WiFi & 10.1" Touchscreen: Provides a stable, high-speed wireless link 3x faster than bluetooth, and a responsive, professional interface. Topdon ONE obd2 scanner diagnostic tool ensures smooth, non-lagging diagnostic scan, boosting mechanic efficiency
- J2534 Pass-Thru Support: The included ONE VCI supports the J2534 standard, allowing it to function as a pass-thru device when paired with OEM diagnostic software.Through TOPDON’s RLink platform, technicians can perform dealer-level coding, expanding in-house capabilities without investing in multiple factory automotive scan tools
- OE Topology Mapping: Visualize the vehicle’s ECU network exactly as it’s built.Zoom, pan, and highlight specific modules to pinpoint component issues with precision.Topology mapping displays real-time communication between modules
- 50 Plus Service Functions: Covers high-demand services like ADAS calibration, DPF regen, TPMS reset, ABS bleed, and throttle adaptation.Expands your service menu, allows you to charge premium rates, and turns away zero jobs due to lack of tooling. Vehicle-specific functionality may vary
- Advaned ECU Coding: 10 of the most serviced brands in North America, including full ECU coding and flash hidden support for BMW, VW, Au-di, Benz, Porsche, Toyota, Ni ssan and more. Enables module replacement, feature customization, and personal settings with automatic backup or restore.Lets your shop safely offer high-margin customization services, attracting more customers and boosting profit
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.