NHTSA ID Number: 10044133
Manufacturer Communication Number: SC-390120008.01
TSB/Document Date: 2012-05-15
Summary
FISKER
: SOFTWARE UPDATE WITHOUT REPLACING ECU. *PE
SB-10044133-3949
CAMPAIGN
FISKER AUTOMOTIVE, INC.
NUMBER: 390120008.01
MODEL: Karma
DATE: January 27, 2012
MODEL YEAR: 2012
TITLE: Baseline 613.5 Release
PRIORITY:
Vehicle in Shop
MARKET REGION:
U.S., Canada, Europe
PURPOSE:
Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration
updates for specific vehicle models/ECUs are released as field-fix procedures described in individual
service bulletins.
This bulletin will be used as a reference guide for technicians to update a vehicle to Baseline 613.5 by
listing software ID numbers as well as the required flash files necessary to update an ECU. A baseline
update may only require that certain ECUs to be updated. Using this guide, the technician can determine
what ECUs have updates and those that do not require it.
CHANGES:
Battery Energy Control Module (BECM) – Resolves potential intermittent charging issues caused by noise
in the electrical circuit of the charging source. This update will also prevent P262B, U019B, P0D22, and
P0C43 DTCs from setting invalid fault codes. With the new software, the HV battery’s internal clock will
sync itself with the GPS clock every 5 minutes to ensure its accuracy, resolving valid P262B trouble codes
being set.
Power Inverter Module – Generator (PIM GEN) – Changes include: Generator speed controller calibration
parameter change to reduce engine oscillation issue. Additionally, the software version ID number has
been updated.
OVERVIEW:
1. Baseline 613.5 ECU Software Version Identification Chart
2. Preparing the Vehicle for ECU Flash Reprogramming
3. Connecting the Fisker Scan Tool and Updating Diagnostic Data
4. BECM Flash Procedure (Baseline 613.5)
5. PIM GEN Flash Procedure (Baseline 613.5)
6. Post ECU Flash Reprogramming Procedure
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 1 of 15
Printed: January 27, 2012
CAMPAIGN
FISKER AUTOMOTIVE, INC.
NUMBER: 390120008.01
MODEL: Karma
DATE: January 27, 2012
MODEL YEAR: 2012
TITLE: Baseline 613.5 Release
VIN: All vehicles with Baseline 613
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 2 of 15
Printed: January 27, 2012
CAMPAIGN
FISKER AUTOMOTIVE, INC.
NUMBER: 390120008.01
MODEL: Karma
DATE: January 27, 2012
MODEL YEAR: 2012
TITLE: Baseline 613.5 Release
Baseline 613.5 ECU Software Identification Number
VGM
Software Version
(BL613.5)
0350-04-00
VCM
0002-05-02
CIU
05.02.07.00
(Check TPI Screen)
TPI
0031-01-11
DIS
0041-01-33
EPB
0061-00-02
EBCM T1
0070-03-04
EBCM T3
0071-03-08
HCU
0111-04-0A
HCU – EV
0116-00-01
0121-05-00
BECM (Updated)
0156-00-16
PIM_TM1
0281-06-06
PIM_TM2
0291-06-06
PIM_GEN (Updated)
0301-06-08
APM
0311-01-00
ECU
NOTE: The BECM and PIM GEN are the only ECUs updated in Baseline 613.5. If the ECU Software
Version IDs on the vehicle match the table above; it is not necessary to flash the other ECUs again.
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 3 of 15
Printed: January 27, 2012
CAMPAIGN
FISKER AUTOMOTIVE, INC.
NUMBER: 390120008.01
MODEL: Karma
DATE: January 27, 2012
MODEL YEAR: 2012
TITLE: Baseline 613.5 Release
Preparing the Vehicle for ECU Flash Reprogramming
NOTE: Battery voltage must be maintained between 12.2 and 16 volts while flashing an ECU.
2a. Disconnect the vehicle from the High Voltage wall charger
2b. Verify the vehicle’s 12 volt battery is at or above 12.2 volts before proceeding.
– If the low-voltage Battery is not at least 12.2 volts, you must charge battery. Connect the
positive lead of the Midtronics MDX series tester (or equivalent) to the B+ positive post at the
Power Distribution Center (PDC) with Fisker Special Tool FST9001 – Battery Charging Terminal Adaptor (to be used for all electrical system testing and charging). Connect the – Negative lead to the Accessory Power Module (APM) ground terminal.
FST9001 - Battery Charging Terminal Adaptor (red arrow) installed on the B+ post in the PDC.
Negative chassis ground (red arrow) location on Accessory Power Module (APM).
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 4 of 15
Printed: January 27, 2012
CAMPAIGN
FISKER AUTOMOTIVE, INC.
NUMBER: 390120008.01
MODEL: Karma
DATE: January 27, 2012
MODEL YEAR: 2012
TITLE: Baseline 613.5 Release
NOTE: Battery voltage must be maintained between 12.2 and 16 volts while flashing.
2c. Before ECU flash reprogramming can be started; the vehicle must be in the ACC – Accessory
mode.
– With the vehicle completely off, press the SSB – Start/Stop Button once. The SSB
backlighting will turn amber and the DIS will display “ACC.”
2d. When the ECU is being reprogrammed; the vehicle must be prevented from going into Sleep
mode. This can be accomplished simply by turning on the Hazard Warning Lights.
NOTE: If the vehicle goes into sleep mode while the ECU is being reprogrammed; the reprogramming
may be unsuccessful and can potentially damage the ECU.
Connecting the Fisker Scan Tool and Updating Diagnostic Data
3a. Connect the WDI to the Data Link Connector (DLC) located underneath the Driver’s side dash.
Then connect the WDI to the Fisker laptop with the provided USB cable.
NOTE: The laptop will automatically install the drivers needed. Please wait for this to finish before
continuing.
NOTE: It is highly recommended to use the USB when flash reprogramming the ECU. It is faster and
more reliable than using the Bluetooth connection.
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 5 of 15
Printed: January 27, 2012
CAMPAIGN
FISKER AUTOMOTIVE, INC.
NUMBER: 390120008.01
MODEL: Karma
DATE: January 27, 2012
MODEL YEAR: 2012
TITLE: Baseline 613.5 Release
3b. Before ECU flash reprogramming, ensure your laptop is updated with the latest diagnostic data
package/ECU software.
3c. Open the FiskerWT software. Update by clicking the “Add New Diagnostic Package” Icon from
the main screen.
3d. Press the “Download ODX” Button. This will open a window showing the download progress.
Please wait until the download is complete before continuing.
3e. Next press the “Download Descriptors” button. After the dialog box dismisses, a number of
deliverables should be shown on the left side.
3f. Select the descriptor that you want to install and select the “Download” button. This will open a
window showing the download progress. Please wait until the download is complete before
continuing.
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 6 of 15
Printed: January 27, 2012
CAMPAIGN
FISKER AUTOMOTIVE, INC.
NUMBER: 390120008.01
MODEL: Karma
DATE: January 27, 2012
MODEL YEAR: 2012
TITLE: Baseline 613.5 Release
3g. After the download of the deliverable is complete, select the “Install” button or double click on
the deliverable. As a result, the deliverable will be shown on the right hand side, indicating it is
installed to the laptop.
NOTE: It is recommended to perform this update procedure constantly as new diagnostic packages will
be released frequently. Completing this procedure before using the Fisker scan tool ensures that you
have the latest data available.
3h. Select Back Action to return to the main menu once the update is complete.
3i. Select “user, default” to move on to the MDI Configuration screen.
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 7 of 15
Printed: January 27, 2012
CAMPAIGN
FISKER AUTOMOTIVE, INC.
NUMBER: 390120008.01
MODEL: Karma
DATE: January 27, 2012
MODEL YEAR: 2012
TITLE: Baseline 613.5 Release
3j. Select WDI (Connection Type - USB) by clicking on it once. When the gray box turns green, the
WDI is ready to use.
NOTE: There may be new firmware to install depending on when you have last connected. By selecting
the WDI connected via the USB cable, any new firmware will install automatically. When the installation
is complete, the MDI selection menu will refresh automatically.
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: SC-390120008.01
Replacement Service Bulletin Number:
MFR Communication Date: 2012-01-27
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM:SOFTWARE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Newly Added in 2026: 7 Reset Functions] The 2026 new version of the OBD2 scanner diagnostic tool CRP123X V3.0 Elite has new special functions for F.REE: Throttle Ad.aptation, Oil/SAS/BMS/Brake Reset, D-P.F Re.generation and ABS Service. Before you visit a mechanic, launch obd2 Scanner CRP123X Elite can perform a more in-depth diagnosis of the car system and provide accurate data within minutes. What's more, the list of compatible models has been expanded. Upgrading frequency is regular, occurring monthly even weekly.
- 🔥[FCA AutoAuth + CAN FD & DoIP] As an upgraded version of the LAUNCH CRP123X/CRP129X, FOXWELL NT614, and ANCEL FX2000, The Newest LAUNCH CRP123X V3.0 auto diagnostic scanner supports the following new protocols: CAN-FD for 2020 and newer G.M and Chrysler
models, as well as DoIP for V.olvo, Land Rover/Jaguar, and B.MW F/G chassis. With integrated AutoAuth, you can diagnose 2018 and newer FCA cars equipped with S.GW. Note: CAN-FD and DoIP protocols require an additional obd2 cable. *Menus vary by make, model, and year of gasoline or diesel engine vehicle. Email us your VIN data. - 🔥[No extra software fee. Works on 90 vehicle brands.] Most OBD2 scanners work with vehicles manufactured after 2001. However, the LUNCH OBD2 scanner is compatible with OBDII-equipped vehicles built after 1996 and works with more than 90 vehicle brands. One-click lifetime updates over WIFI 2.4&5.0Ghz keep the car software current and ensure constant coverage additions, diagnose vehicles from 1996 to 2026 with a massive global database. Android 8.1 ensures lightning-fast boot-up and processing.
- [Accurate & Intuitive Multi System Diagnosis] Will you be confused about what happens when the warning light of transmission, ABS, and SRS Airbag check engine flashes? Launch obd2 scanner diagnostic tool CRP123X V3.0 to pinpoint the problem components for a faster diagnosis for your car instead of taking your car to the dealership. Generate vehicle health reports with one click and share them via email over Wi-Fi to help avoid blind maintenance. And will turn off the warning light for you after fixing the problem, make to know more about your cars and do your own repair.
- [Multiple Display of Live Data + DTC Code Definition Explanation] Launch car tools show real-time data of oil temp, pressure, transmission temp, engine speed, coolant temperature, you will know which car part is abnormal. Data can be shown in a single, multi- graph, and merge two graphs for analysis（or 4-in-1 merged waveform graph),you can save, share, print, or email the overall inspection report for easier analysis.🔥Code Search,DTC Library provide massive information. Inbuilt “Feedback” module provides customized repair suggestions from our certified professionals.
- [2026 X431 PRO3 V+ Elite] A great value for the X431 series that differs from similar diagnostic tools by adding: 1) J2534 protocol for over $800 in savings; 2) CANFD/DOIP support for enhanced communications; 3) Configuration of over $900 worth of HD(heavy truck) modules, needed purchase HD diagnostic software by HD vehicle model for use.; 4) A 10.1 inch Gorilla screen with 1280*800 resolution and 80% more touch screen sensitivity
- [J2534 Protocol Scan Tool] The J2534 Direct Access Device can be used as a factory scanning tool at no cost to you, saving you over $2,000. You can easily expand your ECU protocol capabilities for Toyota, Honda, VW, BMW, Ford, GM, Chrysler, Mercedes-Benz and more. The LAUNCH X431 PRO3 V+ ELITE Scan Tool is equipped with the newly upgraded smartlinkC V2.0. smartLinkC is a communication interface that supports the J2534 specification. It can also be used as a J2534 PassThru device to implement the J2534 protocol with a PC that has OEM diagnostic software installed.The J2534 protocol is the only way to solve problems ranging from drivability and power loss to poor fuel economy
- [Top Hardware Configuration, Upgraded Version of V+] LAUNCH Diagnostic Scanner adopts Android 10.0 OS; CPU is 4-core processor with 2.0 GHz, which greatly improves the speed of running multi-tasks. 2.4GHz/5GHz; 6300mAh/7.6V ultra-large capacity battery; 10.1 inch Gorilla screen, sunlight readable, 8MP camera; Auto VIN; 4GB+64GB storage; 20x transfer rate to save more vehicle files and customer data; New TYPE A interface to connect expansion tools such as oscilloscopes, sensors, etc.; Supports more than 25 software languages such as EN, DE, FR, SP and JP
- [60+ Reset 3000+ Active Test] Full Bi-Directional Scan Tool quickly detects problems and guides repairs based on the response of actuators such as air conditioning clutches, windows, doors, mirrors and more. With the touch of a finger, you can easily send command signals from the scanner to a variety of modular actuators, testing component integrity and functionality in minutes or even seconds to determine if a replacement or repair is needed. In addition, the machine enjoys 60+ special services such as oil reset, ABS brake bleed, EPB, SAS, BMS, suspension, injector reset and more, and undergoes rigorous field testing to ensure availability
- [Unrivaled Coverage, Over 200 Vehicle Brands] LAUNCH X431 PRO3 V+ Elite Automotive Scanner is suitable for over 200 vehicle brands, including commercial vehicles and new energy vehicles. This professional car scanner supports: 1) J2534/D-PDU protocol for HD trucks; DoIP/CANFD for Land Rover/Jaguar, BMW F/G chassis, GM, etc.; 2) FCA Autoauth, covering 2018+ Chrysler/Dodge/Fiat, etc. New/old models, all covered. Includes frequently updated vehicle software and car coverage for faster support of other new models
- 🔥【2026 TOP HARDWARE AND SOFTWARE UPGRADE，UPGRADED OF CRP919E】LAUNCH scanner CRP919EBT wireless obd2 scanner has upgraded TOP HARDWARE CONFIGURATION and ADD NEWEST FUNCTIONS. The more FASTER and SMARTER CRP919EBT with 🔥Bluetooths & USB 2-in-1 connect🔥Android 10.0 OS🔥2.0Ghz 4 core high efficiency processor 4GB RAM+64GB ROM large storage🔥6300mAh large battery, more stable and longer lasting diagnostics🔥VAG Guided🔥ECU Code🔥Bi-directional Control🔥35+ Resets🔥CANFD&DOIP🔥FCA AutoAuth🔥Full System Diagnostics🔥2 Yrs Update🔥Newly add BST360 battery tester & I-TPMS & VSP600 endoscope🔥23+ Languages. Provide an unparalleled diagnostic experience at an affordable price.
- 🚗【CAN FD & DOIP & FCA, SUPER PROTOCOL】LAUNCH X431 CRP919EBT is equipped with the DBSCAR VII Bluetooth connector supporting CANFD and DoIP. The CRP919EBT automotive diagnostic scanner supports CAN FD protocol (compatible with post-2020 GM vehicles). It also meets DoIP protocol requirements (adapter sold separately) for compatibility with BMW (E & F chassis) models from 2017 onward. Autoauth for FCA SGW supports FCA vehicles including Chrysler models from 2017 and later.
- ✔️【ADVANCED ECU CODE, ADAPTATION, CALIBRATION & INITIALIZATION】The LAUNCH X431 CRP919EBT automotive scanner delivers exceptional ECU code capabilities for customized vehicle setups. It provides dealer-level functionality to streamline maintenance and repairs, enabling ECU matching and learning for enhanced customization.
- 👍【BIDIRECTIONAL CONTROL, 4000+ ACTIVE TESTS】LAUNCH OBD2 scanner CRP919EBT features bi-directional control - the most demanded capability among mechanics. When headlights or windows malfunction, repairs can be costly. With CRP919EBT, execute ECU commands and assess repair status through systems including ABS, windows, valves, wipers, and headlights - streamlining diagnostics while slashing repair expenses.
- 🥇【35+ MOST POPULAR RESET SERVICE FOR 160 MAKES】Same as Snap-on scanners, CRP919EBT scan tool delivers 35+ reset functions for 160+ vehicle models, including: service oil reset, throttle adaptation, steering angle calibration, brake pad replacement code, tire pressure reset, ABS bleeding, battery registration, gear signal learning, and injector code, etc.
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.