SA-19-0206 Service Bulletin/Repair Instructions

SB-10043809-7191
SA-19-0206
SERVICE ACTION

To:
All Dealers
For the attention of:
Service Manager/After Sales Manager
Reference
Please copy to:
The Dealer Principal
SA-19-0206
The Sales Manager

The Warranty Administrator
Issued:
Aston Martin Technician(s)
16 February 2012
The Parts Manager

Model:
DBS, Virage, DB9, V8 Vantage S and V8 Vantage.
VIN Range:
Refer to Appendix A
Subject:
BERU TPMS Modules
Page 1 of 11
Reason for this Service Action (SA-19-0206)

A quantity of vehicles have been made that have TPMS modules that are not to the correct manufacturing quality

specification. It is possible that these modules can become defective at some time in the future. Because of this

problem, the TPMS module in all of the vehicles in the affected VIN list must be replaced. If failure of the module

occurs, the TPMS system will self-alert and show a TPMS failure warning.

Please refer to the attached VIN list in Appendix "A" and replace the TPMS module on all vehicles in the list.

Note:
Make sure that you do this Service Action on all new vehicles before they are given to the

Customer.

If the Customer has collected their vehicle, do this Service Action when the vehicle next comes to

your Dealership .
Contents of this Document

This Service Action has the parts that follow:

• Workshop Procedure

• Appendix A - List of Applicable VINs.

Please refer to Appendix A for the list of applicable VINs for the vehicles that are affected by this Service Action.
Workshop Procedure

Note:
1.
A right-hand drive vehicle is shown in the procedure that follows. The procedure for a left-hand

drive vehicle is the same.

Release the carpet and the sound insulation material from the Central Electronic Module (CEM) cover plate

and the footwell.
February 2012
Page 1 of 11
Service Action

2.
SA-19-0206
Remove the seven bolts that attach the CEM cover

plate to the floor and remove the cover plate (refer

to Figure 1).
Figure 1
3.
Release the carpet from the sill and the tunnel.
4.
Move the carpet to get access to the nuts that attach the footwell plate to the floor.
5.
Remove the bottom screw for the blower assembly

to get access to the footwell plate nut (refer to

Figure 2).
Figure 2
6.
Remove the five screws and three nuts that attach

the footwell plate to the floor and remove the

footwell plate (refer to Figure 3).
Figure 3
February 2012
Page 2 of 11
Service Action

7.
SA-19-0206
Remove the two nuts that attach the module for

the tyre pressure monitor (module) to the body

(refer to Figure 4).
Figure 4
8.
Disconnect the electrical connector and remove

the module (refer to Figure 5).
Figure 5
9.
Connect the electrical connector to the new module.
10.
Put the module into position.
11.
Install and tighten the two nuts that attach the

module for the tyre pressure monitor to the body

(refer to Figure 6).
Figure 6
February 2012
Page 3 of 11
Service Action

12.
Put the footwell plate in position.
13.
Install and torque the five screws and three nuts

that attach the footwell plate to the floor, to 9 Nm

(refer to Figure 7).
SA-19-0206
Figure 7
14.
Install and tighten the bottom screw for the blower

assembly (refer to Figure 8).
Figure 8
15.
Put the carpets for the tunnel and the sill back into position.
16.
Put the CEM cover plate into position (refer to

Figure 9).
17.
Install and tighten the seven bolts that attach the

plate to the floor.
Figure 9
18.
Install the sound insulation material and the carpet to the footwell and the CEM cover plate.
Part Data

Description

Module, Tyre Pressure Monitoring ECU
February 2012
Part Number
Quantity
AD43-370807-AB
1
Page 4 of 11
Service Action
SA-19-0206
Warranty Data

Model
Description
Labour

Time
ROT Code
V8 Vantage
Module for the Tyre Pressure Monitor 11MY - Remove and Install New Part
0.45 hours
19.10.DD
V8 Vantage S
Module for the Tyre Pressure Monitor

(Remove and Install New Part)
0.45 hours
19.10.DD
DB9
Module for the Tyre Pressure Monitor 11MY - Remove and Install New Part
0.45 hours
19.10.DD
DBS
Module for the Tyre Pressure Monitor 11MY - Remove and Install New Part
0.45 hours
19.10.DD
Virage
Module for the Tyre Pressure Monitor

(Remove and Install New Part)
0.45 hours
19.10.DB
Causal Part

Number
AD43-370807-AB
Please Note:

When you have completed this Service Action, make sure that you make an entry in Section A of the Vehicle

Owner’s Guide to show that the procedure is completed.
If you have any questions related to this Service Action, please contact: Aston Martin Technical Services

on: +44 (0) 1926 644720 or facsimile: +44 (0) 1926 644733.

E-mail: [email protected]. Or contact your After Sales Manager.

The English version of this Service Action is written in

Simplified Technical English to ASD-STE100™.
February 2012
Page 5 of 11
Service Action
SA-19-0206
Appendix A – List of Affected VINs

Country
Dealer
Model
Body
VIN
V8 Vantage
Coupe
C16205
Australia
Solitaire Aston Martin
Australia
Trivett Classic Melbourne
Virage
Coupe
G14157
Australia
Trivett Classic Melbourne
V8 Vantage S
Coupe
C16198
Australia
Trivett Classic Sydney
Virage
Coupe
G14162
Australia
Trivett Classic Sydney
Virage
Coupe
G14186
Australia
Trivett Classic Sydney
V8 Vantage S
Coupe
C16274
Austria
Aston Martin Salzburg
V8 Vantage
Coupe
C16251
Austria
Aston Martin Vienna
V8 Vantage
Coupe
C16178
Austria
Aston Martin Vienna
V8 Vantage
Coupe
C16179
Austria
Aston Martin Vienna
V8 Vantage
Coupe
C16262
Bahrain
Montana Motors
DBS
Coupe
E03126
Belgium
Aston Martin Antwerp
V8 Vantage
Coupe
C16190
Belgium
Aston Martin Antwerp
V8 Vantage
Coupe
C16208
Belgium
Aston Martin Antwerp
V8 Vantage
Coupe
C16211
Belgium
Aston Martin Antwerp
V8 Vantage
Coupe
C16269
Belgium
Aston Martin Brussels
DBS
Volante
E13140
Canada
Aston Martin Vancouver
DBS
Coupe
E03134
Chile
Aston Martin Santiago
DB9
Coupe
A14144
China
Aston Martin Beijing
V8 Vantage S
Coupe
C16219
China
Aston Martin Chengdu
V8 Vantage S
Coupe
C16213
China
Aston Martin Chengdu
V8 Vantage S
Coupe
C16215
China
Aston Martin Hangzhou
Virage
Coupe
G14194
China
Aston Martin Shanghai
V8 Vantage S
Coupe
C16195
China
Aston Martin Shanghai
V8 Vantage S

12 3 4 5

SaleBestseller No. 1

ANCEL X7HD 10'' Heavy Duty Truck Scanner, Semi Trucks Full System Diagnostic Tool, Bidirectional Diesel Scan Tool with DPF, ECU Coding, 40+ Reset for Cummins, Detroit, Caterpillar, Volvo, Paccar etc

🔥🔥🔥2026 New Functions Making X7HD the Top Dog - Big Surprise!!! ANCEL X7HD truck scanner 10 major functional advantages .✅>Full HDOBD/OBD2 Function ✅>ALL System Diagnostic ✅>42+ Reset Function ✅>Active Test / Bi-Directional Control✅>ECU Coding✅>Graphing Live Data✅>Wide Compatibility ✅>2 Yrs Free Update✅>Remote Operation✅>Bluetooth 5.0 & Wifi In addition, 8 major hardware advantages: ✅>6000 mAh✅>10.1 inch Tablet✅>2G RAM✅>32G ROM (Expandable to 128GB)✅>Data Record & Replay & Print✅>Android 10.0✅>Bluetooth 5.0 & Wifi✅>14 Languages
🚛OEM DPF Forced Regen & Cylinder Cutout Test & more - ANCEL X7HD diesel scanner diagnostic tool not only supports DPF regeneration, DPF reset, DPF related information reset, DPR state reset, DPD forced regeneration etc, which helps you better solve the exhaust aftertreatment system problems, but also supports activate motor to do exhaust air in ABS Automatically. Moreover, it features TPMS activation, cylinder cut-off and learning functions
🚛Advanced ECU Coding & Programming - ANCEL X7HD 10.1inch truck scanner diagnostic tool is equipped with advanced ECU coding, supports Level calibration, Idle speed learning and Adjustment, Camshaft timing control learning, Control unit adaptations, Injector Codes, Read/Write VIN, Road speed limit optional vehicle speed set, etc... PLEASE NOTE that ECU codes are not compatible with all vehicles, please send us your VIN# to check vehicle compatibility
🚛42+ Reset Functions & Bidirectional Control - 2026 newest top heavy duty truck scan tool, comes with 42+ special services (ECU, Speed Limit and Idle Reset, Oil Reset, Injector Coding, EPB, ABS, SRS, Suspension, Throttle, etc. and always keep growing), which meet all your various needs for service and maintenance
🚛10 Inch All Systems Diesel Scanner & Full HDOBD/OBD2 Modes - ANCEL X7HD diesel truck scan tool supports all systems scan, such as Engine, Brake, Retarder, TECU Transmission, Tachograph, ABS, SRS, TPMS, EPB, SAS, ESP, and other vehicle systems, comes with 10 obd2 service modes: read/erase error codes, Data Stream, I/M Readiness, Vehicle Information, Actuations, DTC Lookup, EVAP, view freeze frame, etc

SaleBestseller No. 2

ANCEL Heavy Duty Truck Scanner HD601 All System Diesel Diagnostic Scan Tool fits for Cummins, Detroit, Freightliner, International, Paccar, Check Engine for Truck & Car 2 in 1 Code Reader

【Extensive Compatibility】HD601 heavy duty truck scanner supports 12V & 24V commercial vehicles and all major truck models that comply with standard protocols (SAE J1939, SAE J1708, ISO 14230-4, ISO 15765-4 and ISO 9141-2, ISO 27145-4 and Euro6). Fits for Cummins, Paccar, Detroit, Caterpillar, Freightliner, International, Peterbilt, Ford Heavy Truck, Class 4-Class 8 trucks, etc. It also supports engine diagnosis on most cars, minivans, light trucks and pickups
【 Full System Diagnostic】HD601 Diesel Scanner supports all system scans of heavy trucks compliant with standard protocols SAE J1939 & J1708, such as Engine, ABS, Transmission, Braking System, ESP, EPS, Fuel System, etc, It is a great scan tool for Cummins, Caterpillar, Detroit, Caterpillar, Maxxforce, Bendix,Wabash, Wabaco, Haldex, Allison, Eaton heavy trucks, With this truck tool, you can get deep analysis data about the system and do some repairs by yourself, saving much time and money. Note: Only heavy truck vehicles that comply with the above protocol can diagnose the entire system
【Enhanced Diesel OBD Scanner】The HD601 Diesel OBD Scanner offers unparalleled diagnostic capabilities for heavy-duty trucks. Beyond code reading, clearing, and live data display, it retrieves vehicle information, freeze frames, and DTCs. With 6, 9, and 16 pin cables, it ensures compatibility with various engines. This scanner's real-world testing prowess ensures comprehensive support for a wide array of heavy-duty truck engines, making it an indispensable tool for truck diagnostics
【DTC Library】+【Life Time Free Update】The built-in DTC library allows you to retrieve the codes directly without searching for the definition in the book. Whether you are a professional mechanic or a DIY car owner, HD601 diesel scanner explains the existing problem, makes it easier for you to understand code definitions and helps you locate vehicle faults. Note: This device cannot directly solve the fault. Plus, you get a lifetime free internet updates, so you always have the latest software for diagnostics in English and Spanish languages.
【Friendly Design, Easy of Use】This scanner is plug and play, simple and convenient, and very friendly for beginners. With improved buttons for easy menu navigation. The excellent 2.8 inch LCD color screen makes it easy to view the displayed results and gives you a better overview of your car's problem areas and the identified codes. In addition, the processor is super-fast and responds without lagging, providing maximum comfort and efficiency in diagnostic and service work

SaleBestseller No. 3

NEXAS Heavy Duty Truck Scanner NL102 Full System Diesel Truck Scan Tool for Cummins, Isuzu, Freightliner, Caterpillar, Detroit, Peterbilt, 2-in-1 Code Reader Read & Clear Fault Codes for Truck & Car

Why NEXAS NL102 Truck Scan Tool? The NL102 outshines other truck scanner with its extensive diagnostic features. It offers full system diagnostics for major trucks meeting standard protocols, along with complete OBD2 functionality. Beyond read fault codes, clear codes and live data display, it enables vehicle info retrieval, freeze frame capture, and DTC lookup. Equipped with 6-pin, 9-pin, 16-pin connectors, it ensures broad truck compatibility. Plus, enjoy lifetime free updates in English, Spanish, and French, keeping your diagnostic scanner software current.
Wide Compatibility - Friendly Reminder: To avoid compatibility issues, please confirm with us via Amazon Messages before purchasing. This heavy duty truck scanner is compatible with all heavy-duty trucks and semi that adhere to standard protocols (J1587, J1939, J1708). It covers a wide range of vehicle models, including Cummins, Detroit, Caterpillar, Freightliner, International, Kenworth, John Deere, Peterbilt, Sterling, Mack, Paccar, Western Star, Mercedes-Benz, Volvo, Scania, MAN, Renault, ERF, Foden, Seddon-Atkinson, Iveco, DAF, SISU, STEYR, ISUZU etc. Equipped with 6-pin, 9-pin, and 16-pin connectors for versatile device compatibility, ensuring stable plug-and-play connections.
Save Hundreds of Money for All Heavy Duty Trucks – This diesel diagnostic scanner supports accurate full-system scans for all heavy-duty trucks that comply with standard protocols (J1587, J1939, and J1708). It can read and clear trouble codes across a range of vehicle systems, including the engine, transmission, instrument panel, drivetrain, brake system, suspension, ABS, ESP, EPS, fuel system, etc. The truck scanner communicates directly with your truck's computer to provide real-time data stream analysis, letting you pinpoint issues with precision. This cuts down on waste from unnecessary part replacements, saving you time and hundreds or even thousands of dollars.
All OBD2 Functions + Battery Health Monitoring – Unlike many obd2 scanners on the market that only cover partial OBD2 features, ours gives you full OBD2 capability: read & clear codes, live data, freeze frame data, I/M readiness checks, EVAP tests, on-board monitor, O2 sensor tests, vehicle info, and DTC lookup. That means more detailed insights for pros and DIYers alike. The NL102 isn't just a code scanner – it's a battery saver. Regularly check your car's battery health, and catch issues before it dies completely. No more unexpected no-starts in the driveway or on the road. It diagnoses battery condition accurately, helping you avoid costly last-minute repairs.
Plug and Play & One-click for DTC: NEXAS diesel scanner is user-friendly. It comes with an intuitive screen and easy-to-understand interface, making it accessible even for non-professionals to get started. And the built-in DTC library in the code reader allows you to directly retrieve codes without searching for definitions in books, making it easier to understand the code definitions and solve problems more quickly.

This product presentation was made with AAWP plugin.

Last update on 2026-05-12 / Affiliate links / Images from Amazon Product Advertising API

Buffer Email Facebook Flipboard Hacker News LinkedIn Messenger Mix Pinterest Print Reddit SMS Telegram Tumblr X VK WhatsApp Line Xing Threads Bluesky Copy Mastodon Nextdoor