NHTSA ID Number: 10043606
Manufacturer Communication Number: SB-278120013
TSB/Document Date: 2012-04-14
Summary
FISKER: INSTRUCTIONS PROVIDED FOR REPLACING ENTIRE EXTERIOR SIDE MIRROR ASSEMBLY COMPONENTS AFTER REBUILDING A DIFFERENT MIRROR. *PE
SB-10043606-4829
SERVICE BULLETIN
FISKER AUTOMOTIVE, INC.
NUMBER: 278120013.01
MODEL: Karma
DATE: February 15, 2012
MODEL YEAR: 2012
TITLE: Exterior Side Mirror Rebuild and Replacement Procedure
PRIORITY:
Vehicles in Operation
APPLICABILITY:
2012 Karma
MARKET REGION:
U.S., Europe
PURPOSE:
This document outlines the procedures of rebuilding the different exterior side mirror assembly
components. These instructions are to be followed when replacing the entire exterior side mirror assembly
or its individual components, such as the mirrored glass panel, mirror pivot mechanism, or the antenna.
If only replacing mirrored glass panel:
It is possible to perform work without removing mirror assembly from the vehicle. In this case, follow
instructions in Steps #3 and #7.
Instructions include removal photos and procedures of left-hand door interior trim panel and work
associated with left-hand mirror assembly. Instructions are applicable for work on right-hand interior trim
panel and mirror assembly.
PROCESS OVERVIEW:
1. Remove Interior Trim Panel
2. Remove Side-View Mirror Assembly
3. Remove Mirrored Glass Panel
4. Replace Mirror Pivot Mechanism
5. Remove Body-Colored Mirror Scalp
6. Antenna Replacement
7. Install Mirrored Glass Panel
8. Install Mirror Scalp, Mirror Assembly, and Interior Trim Panel
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 1 of 14
Printed: February 15, 2012
SERVICE BULLETIN
FISKER
AUTOMOTIVE, INC.
NUMBER: 278120013.01
MODEL: Karma
DATE: February 15, 2012
MODEL YEAR: 2012
TITLE: Exterior Side Mirror Rebuild and Replacement Procedure
Caution!
When working with exterior side-view mirror assembly, follow instructions carefully. Injury may
occur if mirror is broken or if it breaks while work is in progress. Take extra precautions to
protect against personal injury and damage to vehicle.
1. Remove Interior Trim Panel
1a. Open driver’s door to access interior trim panel.
1b. Power down the vehicle. Open the hood and disconnect the 12 Volt battery via connector
C104 located on right-hand strut tower.
12 Volt Battery Negative Connector C104
1c. Carefully release clips (x2) and remove interior trim panel finisher (see illustration below).
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 2 of 14
Printed: February 15, 2012
SERVICE BULLETIN
FISKER AUTOMOTIVE, INC.
NUMBER: 278120013.01
MODEL: Karma
DATE: February 15, 2012
MODEL YEAR: 2012
TITLE: Exterior Side Mirror Rebuild and Replacement Procedure
1d. Remove screws (x2) securing interior trim panel to door (see illustration below).
1e. Using a suitable trim removal tool, carefully release clips (x9) securing interior trim panel to
door.
1f. Disconnect door harness connector, illumination connectors (x2), and handle release cable
from interior trim panel and set panel aside.
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 3 of 14
Printed: February 15, 2012
SERVICE BULLETIN
FISKER AUTOMOTIVE, INC.
NUMBER: 278120013.01
MODEL: Karma
DATE: February 15, 2012
MODEL YEAR: 2012
TITLE: Exterior Side Mirror Rebuild and Replacement Procedure
2. Remove Side-View Mirror Assembly
2a. Remove screw securing interior cheater panel to door.
2b. Using a suitable tool, carefully release interior cheater panel plastic attaching stud.
2c. Disconnect exterior mirror harness and antenna connector.
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 4 of 14
Printed: February 15, 2012
SERVICE BULLETIN
FISKER AUTOMOTIVE, INC.
NUMBER: 278120013.01
MODEL: Karma
DATE: February 15, 2012
MODEL YEAR: 2012
TITLE: Exterior Side Mirror Rebuild and Replacement Procedure
2d. Maneuver “A” post seal aside to reveal mirror fasteners.
2e. Remove screws (x3) securing mirror assembly to door (torque – 8 Nm).
2f. Remove mirror assembly.
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 5 of 14
Printed: February 15, 2012
SERVICE BULLETIN
FISKER AUTOMOTIVE, INC.
NUMBER: 278120013.01
MODEL: Karma
DATE: February 15, 2012
MODEL YEAR: 2012
TITLE: Exterior Side Mirror Rebuild and Replacement Procedure
3. Remove Mirrored Glass Panel
Caution!
When working with the mirrored glass panel, follow instructions carefully. Injury may occur if
mirror is broken or if it breaks while work is in progress. Take extra precautions for protection.
The mirrored glass panel backing has eight clips which latch around the outside perimeter of the
pivot mechanism (as illustrated in images below).
Pivot mechanism will not detach from mirror assembly when removing mirrored glass panel (shown
attached in image above for reference only).
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 6 of 14
Printed: February 15, 2012
SERVICE BULLETIN
FISKER AUTOMOTIVE, INC.
NUMBER: 278120013.01
MODEL: Karma
DATE: February 15, 2012
MODEL YEAR: 2012
TITLE: Exterior Side Mirror Rebuild and Replacement Procedure
3a. Place mirror upside-down on protective surface.
3b. Tilt mirrored glass panel so you can insert fingers under bottom edge (as shown in image
below).
NOTE: Do not use tools to remove mirrored glass panel. Only insert fingers in location instructed.
Mirror assembly shown upside down in image above.
3c. With even pressure spread across each of your fingertips, pull mirrored glass panel away from
pivot mechanism.
NOTE: Do not to let mirrored glass panel fall or get damaged when pulling it from the pivot mechanism.
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 7 of 14
Printed: February 15, 2012
SERVICE BULLETIN
FISKER AUTOMOTIVE, INC.
NUMBER: 278120013.01
MODEL: Karma
DATE: February 15, 2012
MODEL YEAR: 2012
TITLE: Exterior Side Mirror Rebuild and Replacement Procedure
3d. To remove mirror heater wires, place thumb over electrical tab and grab wire by its connector
and gently pull wire connector from tab. Repeat for second wire.
NOTE: If only replacing mirrored glass panel, skip to step #7.
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 8 of 14
Printed: February 15, 2012
SERVICE BULLETIN
FISKER AUTOMOTIVE, INC.
NUMBER: 278120013.01
MODEL: Karma
DATE: February 15, 2012
MODEL YEAR: 2012
TITLE: Exterior Side Mirror Rebuild and Replacement Procedure
4. Replace Mirror Pivot Mechanism
4a. Remove pivot mechanism mounting screws (x3).
4b. Unplug pivot mechanism wiring harness.
Back side of mirror pivot mechanism (for reference only).
4c. Plug wiring harness into pivot mechanism.
4d. Install new mirror pivot mechanism until snug (do not overtighten).
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 9 of 14
Printed: February 15, 2012
SERVICE BULLETIN
FISKER AUTOMOTIVE, INC.
NUMBER: 278120013.01
MODEL: Karma
DATE: February 15, 2012
MODEL YEAR: 2012
TITLE: Exterior Side Mirror Rebuild and Replacement Procedure
5. Remove Body-Colored Mirror Scalp
With mirrored glass removed from mirror assembly, there will be access to the locking tabs which
hold the body-colored decorative scalp to the mirror assembly.
Image above shows body-colored scalp detached for reference purposes only.
Image above is for reference: the body-colored scalp has five fixed plastic studs (see red arrows).
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 10 of 14
Printed: February 15, 2012
SERVICE BULLETIN
FISKER AUTOMOTIVE, INC.
NUMBER: 278120013.01
MODEL: Karma
DATE: February 15, 2012
MODEL YEAR: 2012
TITLE: Exterior Side Mirror Rebuild and Replacement Procedure
5a. Gently pry the locking tabs (take extra care as the locking tabs will break) to release scalp.
Start with the two upper tabs (as noted in the image below) and then gently pry the side locking
tabs. The bottom locking tab will release on its own when the other ones have been released.
The locking tabs are fragile. Do not pry them too far.
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 11 of 14
Printed: February 15, 2012
SERVICE BULLETIN
FISKER AUTOMOTIVE, INC.
NUMBER: 278120013.01
MODEL: Karma
DATE: February 15, 2012
MODEL YEAR: 2012
TITLE: Exterior Side Mirror Rebuild and Replacement Procedure
6. Antenna Replacement
6a. Remove hinge closing panel under mirror to access antenna wire harness.
6b. Remove the attaching screw (see red arrow in image below) and remove antenna unit.
6c. Install antenna and attaching screw (do not overtighten).
NOTE: Overtightening antenna attaching screw will result in a broken mounting ear.
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 12 of 14
Printed: February 15, 2012
SERVICE BULLETIN
FISKER AUTOMOTIVE, INC.
NUMBER: 278120013.01
MODEL: Karma
DATE: February 15, 2012
MODEL YEAR: 2012
TITLE: Exterior Side Mirror Rebuild and Replacement Procedure
6d. Route antenna wire through hinge tube and out through the bottom of the mirror assembly (as
illustrated in images below). Then route wire through the side mounting flange.
6e. Install hinge closing panel cover on bottom of mirror assembly (not shown).
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 13 of 14
Printed: February 15, 2012
SERVICE BULLETIN
FISKER AUTOMOTIVE, INC.
NUMBER: 278120013.01
MODEL: Karma
DATE: February 15, 2012
MODEL YEAR: 2012
TITLE: Exterior Side Mirror Rebuild and Replacement Procedure
7. Install Mirrored Glass Panel
7a. Inspect mirrored glass panel for damage prior to assembly.
7b. Connect mirror heater wires to tabs on back of mirrored glass panel.
7c. Confirm orientation of mirrored glass panel on pivot mechanism.
7d. Push mirrored glass panel onto pivot mechanism by evenly applying pressure to the center
area of the glass panel with palm of hand.
NOTE: Do not apply pressure to edges of mirrored glass panel or damage may occur.
7e. Confirm mirrored glass panel is properly attached.
8. Install Mirror Scalp, Mirror Assembly, and Interior Trim Panel
8a. Make sure necessary accessory wires are correctly routed through mirror hinge tube. Carefully
push body-colored scalp onto mirror assembly (clip bottom attaching stud of scalp into mirror
assembly first, then snap the rest of the scalp into place).
8b. Install side mirror – see step #2 and follow steps in reverse.
8c. Install interior trim panel – see step #1 and follow steps in reverse.
8d. Reconnect ground lead C104.
8e. Check all door, window, mirror, and stereo functions to confirm all are operational.
Fisker Bulletins are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment and a suitable workshop for any procedure
described in this document, we suggest you leave such repairs to an Authorized Fisker Retailer or other qualified shop. See your Fisker Retailer for advice on
whether your vehicle may benefit from the information contained within this document. The information contained in the Fisker Bulletin is accurate at the date of publication. However, Fisker Automotive regularly updates technical information. Please check with your Fisker Retailer that the bulletin you intend to use contains the
latest available information.
Page: 14 of 14
Printed: February 15, 2012
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 📌【We are Here for You】Dear valued customer, please be...
- 🚀【5X Faster Next-Level Hardware, Same as MK900/ MX...
- 🔥【3000+ Active Tests = MK900/MK900BT but...
- 📢【2026 U.S. Version, All-in-One as MK808S/ MK808Z...
- 🔥【28+ Hot Services for 150+ Brands】Same as MaxiCOM...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: SB-278120013
Replacement Service Bulletin Number:
MFR Communication Date: 2012-02-15
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.