Date: 2023-07-28
Tesla
, Inc.
NHTSA Action Number: PE23014
Components: STEERING
Subject:
Loss of steering control
Opened From: 2023-07-28 - 2024-02-05
Summary
On July 28, 2023, The Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE23-014) after receiving 12 Vehicle Owner Questionnaires (VOQs) reporting loss of steering control in model years (MY) 2023 Tesla Model 3 and Y vehicles. During PE23-014, ODI interviewed complainants, sent an Information Request (IR) letter to Tesla, and convened technical meetings with Tesla that included a joint inspection of a crashed vehicle. The investigation identified 2,388 total complaints regarding the alleged defect, including 124 complaints through VOQs and 2,264 complaints through manufacturer data. ODI is associating 1 crash to this investigation (11544655), where a driver was unable to complete a right hand turn in the intersection and hit a vehicle. This vehicle was subject to a joint inspection by ODI and Tesla. The steering rack was recovered by ODI with the consumer-s permission. ODI-s interviews of allegations supplied to the agency, in the form of VOQs, identified patterns of the incoming complaint traffic. Complaints allege an inability to turn the steering wheel, while other complaints allege an increase in required effort to turn the steering wheel. These conditions were reported to occur during the drive cycle as well as at start-up. Approximately one-third of complaints with a reported speed occurred at vehicle start-up or speeds less than 5 mph. Interviews with failures reported at speeds over 5 mph, half reported an inability to turn the steering wheel. A majority of complaints with a reported speed reported between 5 mph and 35 mph with approximately 1 in 10 occurring on open roads at speeds 35 mph and over. The highest reported speed regarding an alleged inability to turn the steering wheel is 75 mph. A majority of allegations reported seeing a warning message, "Steering assist reduced", either before, during or after the loss of steering control. A portion of drivers described their steering begin to feel "notchy" or "clicky" either prior to or just after the incident. There have been multiple allegations of drivers blocking intersections and/or roadways. ODI is aware of over 50 vehicles which were allegedly towed as a result of the condition from a variety of areas including, driveways, parking lots, side of road and intersections. Multiple complaints state they were able to temporarily remedy the condition by power cycling the vehicle, but the issue reoccurred until the steering rack was replaced. Tesla supplied four steering rack part numbers on the subject vehicles. The investigation identified part numbers, 1044832-00-A and 1188832-00-A accounted for 2,187 of the complaints and 4 did not have original part number in the information request. ODI has upgraded PE23-014 to an Engineering Analysis (EA24-001) due to continued complaint traffic and to characterize the system conditions leading to- and stemming from- the alleged defect in vehicles supplied with steering rack part numbers 1044832-00-A and 1188832-00-A To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Investigation Documents
For Latest Documents related to this Investigation, visit the NHTSA Website.
Click the (+) Plus Sign
Then click Associated Document(s).
- UNIVERSAL COMPATIBILITY: Seamlessly transitions between NACS...
- CHARGING SPEED: Up to 44 miles of range per hour of charge...
- CONVENIENCE: Indoor or outdoor installation (by your own...
- CONNECTIVITY: Connecting the Wall Connector to a local Wi-Fi...
- POWER-SHARE: Power-share is ideal for locations that need to...
Search NHTSA Database for Recalls
Search NHTSA Database for (TSB's) Technical Service Bulletins
Technical Service Bulletins TSB's List
Previous Investigation | Next Investigation |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.