Date: 2019-08-06
Subaru
of America, Inc.
NHTSA Action Number: PE19009
Components: AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE
Subject:
Occupant Detection System (ODS) Failure
Opened From: 2019-08-06 - 2020-01-22
NHTSA Recall Number: 19V701
Summary
The Office of Defects Investigation (ODI) opened PE19-009 to investigate 51 complaints and additional Early Warning Report (EWR) data related to allegations of front passenger seat Occupant Detection System (ODS) malfunctions in model year (MY) 2016 through 2018 Subaru Forester vehicles. These vehicles use a capacitive type ODS, which is intended to classify the occupant of the passenger seat as either full-sized, small stature, a child seat or other object. The complaints reported the ODS failed to operate properly, the SRS (Supplemental Restraint System) warning light illuminated, and/or the ODS incorrectly suppressed (turned off) the front passenger air bag when the seat was occupied by a full-sized passenger. In a frontal crash that is sufficient to warrant deployment, a suppressed air bag may increase the risk of injury to the occupant of the seat.On August 14, 2019 ODI sent an Information Request (IR) to Subaru requesting information on the subject vehicles and MY 2014-2015 Subaru Forester vehicles.On October 3, 2019, Subaru submitted a Defect Information Report (DIR) to NHTSA describing a safety defect in the passenger-side front airbag Occupant Detection System (ODS) harness of 366,282 MY 2015-2018 Subaru Forester vehicles equipped with seat heaters.The DIR stated that over time, due to a decrease in contact pressure between the terminals in the ODS sensor mat harness, a temporarily unstable electrical connection may be possible. If the connection is temporarily unstable, the ODS may not properly determine the status of the right front seat occupant. If the ODS is unable to correctly determine the status of the front occupant, the airbag warning light may illuminate, and the front passenger airbag may deactivate even though the seat is occupied, increasing the risk of injury to the front passenger in the event of a crash.Using vehicle production data and field occurrence frequency, Subaru determined the potentially affected vehicle production range to be between January 20, 2015 ?and August 1, 2017.In addition, Subaru indicated that over 99 percent of the related MY 2015-2018 field reports with vehicles in the production range involved vehicles with seat heaters.NHTSA's analysis of complaint and warranty claim data showed 1,440 of the complaints and 11,672 of the claims involve vehicles with seat heaters that were built within the production range covered by Subaru's recall.In addition, NHTSA's analysis showed a complaint rate of 393.1 per hundred thousand vehicles for the recalled population and 89.0 for MY 2014 through 2018 vehicles that are not included in the recall. Analysis of warranty claim data found a claim rate of 3.2 percent for the recalled population and 0.3 percent for MY 2014 through 2018 vehicles that are not included in the recall.Subaru will instruct owners with Subaru Forester vehicles produced in the affected vehicle production range, to bring their vehicles to a dealer to have the sensor mat harness, inspected and replaced with a new part, including the seat cushion assembly, if necessary.Based on ODI's analysis, the actions taken by Subaru mitigate any unreasonable risk to safety posed by ODS sensor mat failures in the subject vehicles. For subject and peer vehicles outside the recall population and those equipped without seat heaters, ODI's analysis indicates that there is currently no safety-related defect trend. Given these circumstances, further use of the agency resources in this matter does not appear to be warranted. Accordingly, this investigation is closed.
Investigation Documents
For Latest Documents related to this Investigation, visit the NHTSA Website.
Click the (+) Plus Sign
Then click Associated Document(s).
- 【Gold Plated Brass】: These airbag testing tools have...
- 【Sensitive Diagnosis】: This auto airbag testing tool has...
- 【Small and Light】: These automotive airbag testing tools...
- 【Easy to Use】: This car airbag testing tool is very easy...
- 【Scope of Application】: Car airbag detection tool for a...
Search NHTSA Database for Recalls
Search NHTSA Database for (TSB's) Technical Service Bulletins
Technical Service Bulletins TSB's List
Previous Investigation | Next Investigation |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.