Date: 2005-04-07
SAAB
CARS USA, INC.
NHTSA Action Number: PE05017
Components: ELECTRICAL SYSTEM:IGNITION:MODULE
Subject:
ENGINE STALL/ ENGINE COMPARTMENT FIRES
Opened From: 2005-04-07 - 2005-09-23
NHTSA Recall Number: 05V399
Summary
ODI OPENED PE05-017 BASED ON 35 REPORTS OF ALLEGED ENGINE STALLING DUE TO THE FAILURE OF THE IDM CASSETTE ON THE SUBJECT VEHICLES.ALL COMPLAINANTS REPORTED THAT THE ENGINE SHUT DOWN SUDDENLY WITHOUT WARNING AND MOST REPORTED THAT THE VEHICLE WOULD NOT RESTART.IN 3 INCIDENTS, THE COMPLAINANTS REPORTED SMOKE AND/OR FIRE RESULTED FROM THE IDM FAILURE.DURING PE05-017, ADDITIONAL FAILURE DATA WAS IDENTIFIED AS NOTED IN THE FAILURE REPORT SUMMARY ABOVE.THE COMPLAINT DATA REPRESENTS INCIDENTS WHERE THE COMPLAINANTS ALLEGED A STALL OR FIRE.ON SEPTEMBER 13, 2005, GENERAL MOTORS (GM) NOTIFIED NHTSA OF A SAFETY DEFECT ON 95,081 MY 2000-2002 SAAB 9-3 AND 9-5 VEHICLES WITH 4-CYLINDER GASOLINE ENGINES AND 8,117 MY 2001 9-5 VEHICLES WITH 6- CYLINDER GASOLINE ENGINES (RECALL 05V-399).THE NOTIFICATION STATED THAT CERTAIN VEHICLES WITHIN THESE POPULATIONS MAY EXPERIENCE OVERHEATING AND BURNOUT OF THE ISOLATED GATED BIPOLAR TRANSISTOR (IGBT) WITHIN THE IDM DUE TO INCREASED SUSCEPTIBILITY TO ELECTRICAL LOADS.OVERHEATING OF THE IGBT OCCURS MOST OFTEN AT ENGINE START-UP FOR BOTH A 4-CYLINDER AND 6-CYLINDER ENGINE, BUT IT MAY ALSO OCCUR WHILE THE ENGINE IS RUNNING.WHEN THE IDM FAILS ON A 4-CYLINDER WHILE IT IS RUNNING, THE ENGINE MAY STALL WITHOUT WARNING, WITH NO ABILITY TO BE RESTARTED.WHEN THE IDM FAILS ON A 6-CYLINDER ENGINE WHILE IT IS RUNNING, THE DRIVER WILL INITIALLY EXPERIENCE REDUCED POWER AND ROUGH OPERATION BECAUSE THE ENGINE WILL ONLY BE RUNNING ON THREE CYLINDERS.THE CHECK ENGINE LIGHT WILL FLASH.IF THE DRIVER CONTINUES, UNBURNT FUEL IN THE EXHAUST CAN CAUSE THERMAL DAMAGE TO THE CATALYTIC CONVERTER.THE ENGINE MAY STALL AND NOT RESTART.THERMAL DAMAGE TO OTHER UNDERHOOD COMPONENTS AND THE UNDERBODY MAY ALSO RESULT FROM PROLONGED DRIVING.THE RECALL POPULATION ENCOMPASSES 84% OF THE STALLING AND FIRE COMPLAINTS (215 FOR VEHICLES WITH 4-CYLINDER ENGINES AND 36 FOR VEHICLES WITH 6-CYLINDER ENGINES).THE 36 MONTHS IN SERVICE (MIS) STALLING RATES FOR EACH MODEL YEAR OF RECALLED VEHICLES WITH 4-CYLINDER ENGINES WERE ALL GREATER THAN TWO PERCENT.ALTHOUGH THE 36 MIS STALL RATE FOR THE RECALLED MY 2001 VEHICLES WITH V6 ENGINES WAS LOWER, AT 1.3 PERCENT, THESE VEHICLES ALSO HAD THE HIGHEST RATE OF CONFIRMED (OPEN FLAME VERIFIED) FIRES AT 62 PER 100,000 VEHICLES.GM WILL INSTRUCT OWNERS TO BRING THEIR VEHICLES TO A DEALER FOR IDM INSPECTION AND REPLACEMENT, IF NECESSARY.CONSEQUENTLY, THIS INVESTIGATION IS CLOSED.ODI WILL MONITOR THE EFFECTIVENESS OF THE SCOPE AND REMEDY OF GM'S ACTION AND TAKE FURTHER ACTION IF WARRANTED.
Investigation Documents
For Latest Documents related to this Investigation, visit the NHTSA Website.
Click the (+) Plus Sign
Then click Associated Document(s).
- Formulated for engines with 75,000 miles or more, Valvoline...
- Delivers 20% better wear protection and 15% better sludge...
- Extra detergents safeguard against friction, corrosion and...
- Advanced friction-fighting additives help maximize...
- Provides performance benefits for high mileage, new and...
- Designed for vehicles with 75,000 miles or more, Valvoline...
- Formulated with seal conditioners to help prevent oil leaks...
- Delivers 50% stronger wear protection than industry...
- Provides 20% stronger sludge defense than industry standards...
- Offers 2.5X better heat protection than industry standards...
Last update on 2026-06-21 / Affiliate links / Images from Amazon Product Advertising API
Search NHTSA Database for Recalls
Search NHTSA Database for (TSB's) Technical Service Bulletins
Technical Service Bulletins TSB's List
Previous Investigation | Next Investigation |
- [Newly Added in 2026: 7 Reset Functions] The 2026 new version of the OBD2 scanner diagnostic tool CRP123X V3.0 Elite has new special functions for F.REE: Throttle Ad.aptation, Oil/SAS/BMS/Brake Reset, D-P.F Re.generation and ABS Service. Before you visit a mechanic, launch obd2 Scanner CRP123X Elite can perform a more in-depth diagnosis of the car system and provide accurate data within minutes. What's more, the list of compatible models has been expanded. Upgrading frequency is regular, occurring monthly even weekly.
- 🔥[FCA AutoAuth + CAN FD & DoIP] As an upgraded version of the LAUNCH CRP123X/CRP129X, FOXWELL NT614, and ANCEL FX2000, The Newest LAUNCH CRP123X V3.0 auto diagnostic scanner supports the following new protocols: CAN-FD for 2020 and newer G.M and Chrysler
models, as well as DoIP for V.olvo, Land Rover/Jaguar, and B.MW F/G chassis. With integrated AutoAuth, you can diagnose 2018 and newer FCA cars equipped with S.GW. Note: CAN-FD and DoIP protocols require an additional obd2 cable. *Menus vary by make, model, and year of gasoline or diesel engine vehicle. Email us your VIN data. - 🔥[No extra software fee. Works on 90 vehicle brands.] Most OBD2 scanners work with vehicles manufactured after 2001. However, the LUNCH OBD2 scanner is compatible with OBDII-equipped vehicles built after 1996 and works with more than 90 vehicle brands. One-click lifetime updates over WIFI 2.4&5.0Ghz keep the car software current and ensure constant coverage additions, diagnose vehicles from 1996 to 2026 with a massive global database. Android 8.1 ensures lightning-fast boot-up and processing.
- [Accurate & Intuitive Multi System Diagnosis] Will you be confused about what happens when the warning light of transmission, ABS, and SRS Airbag check engine flashes? Launch obd2 scanner diagnostic tool CRP123X V3.0 to pinpoint the problem components for a faster diagnosis for your car instead of taking your car to the dealership. Generate vehicle health reports with one click and share them via email over Wi-Fi to help avoid blind maintenance. And will turn off the warning light for you after fixing the problem, make to know more about your cars and do your own repair.
- [Multiple Display of Live Data + DTC Code Definition Explanation] Launch car tools show real-time data of oil temp, pressure, transmission temp, engine speed, coolant temperature, you will know which car part is abnormal. Data can be shown in a single, multi- graph, and merge two graphs for analysis（or 4-in-1 merged waveform graph),you can save, share, print, or email the overall inspection report for easier analysis.🔥Code Search,DTC Library provide massive information. Inbuilt “Feedback” module provides customized repair suggestions from our certified professionals.
- [2026 X431 PRO3 V+ Elite] A great value for the X431 series that differs from similar diagnostic tools by adding: 1) J2534 protocol for over $800 in savings; 2) CANFD/DOIP support for enhanced communications; 3) Configuration of over $900 worth of HD(heavy truck) modules, needed purchase HD diagnostic software by HD vehicle model for use.; 4) A 10.1 inch Gorilla screen with 1280*800 resolution and 80% more touch screen sensitivity
- [J2534 Protocol Scan Tool] The J2534 Direct Access Device can be used as a factory scanning tool at no cost to you, saving you over $2,000. You can easily expand your ECU protocol capabilities for Toyota, Honda, VW, BMW, Ford, GM, Chrysler, Mercedes-Benz and more. The LAUNCH X431 PRO3 V+ ELITE Scan Tool is equipped with the newly upgraded smartlinkC V2.0. smartLinkC is a communication interface that supports the J2534 specification. It can also be used as a J2534 PassThru device to implement the J2534 protocol with a PC that has OEM diagnostic software installed.The J2534 protocol is the only way to solve problems ranging from drivability and power loss to poor fuel economy
- [Top Hardware Configuration, Upgraded Version of V+] LAUNCH Diagnostic Scanner adopts Android 10.0 OS; CPU is 4-core processor with 2.0 GHz, which greatly improves the speed of running multi-tasks. 2.4GHz/5GHz; 6300mAh/7.6V ultra-large capacity battery; 10.1 inch Gorilla screen, sunlight readable, 8MP camera; Auto VIN; 4GB+64GB storage; 20x transfer rate to save more vehicle files and customer data; New TYPE A interface to connect expansion tools such as oscilloscopes, sensors, etc.; Supports more than 25 software languages such as EN, DE, FR, SP and JP
- [60+ Reset 3000+ Active Test] Full Bi-Directional Scan Tool quickly detects problems and guides repairs based on the response of actuators such as air conditioning clutches, windows, doors, mirrors and more. With the touch of a finger, you can easily send command signals from the scanner to a variety of modular actuators, testing component integrity and functionality in minutes or even seconds to determine if a replacement or repair is needed. In addition, the machine enjoys 60+ special services such as oil reset, ABS brake bleed, EPB, SAS, BMS, suspension, injector reset and more, and undergoes rigorous field testing to ensure availability
- [Unrivaled Coverage, Over 200 Vehicle Brands] LAUNCH X431 PRO3 V+ Elite Automotive Scanner is suitable for over 200 vehicle brands, including commercial vehicles and new energy vehicles. This professional car scanner supports: 1) J2534/D-PDU protocol for HD trucks; DoIP/CANFD for Land Rover/Jaguar, BMW F/G chassis, GM, etc.; 2) FCA Autoauth, covering 2018+ Chrysler/Dodge/Fiat, etc. New/old models, all covered. Includes frequently updated vehicle software and car coverage for faster support of other new models
- 🔥【2026 TOP HARDWARE AND SOFTWARE UPGRADE，UPGRADED OF CRP919E】LAUNCH scanner CRP919EBT wireless obd2 scanner has upgraded TOP HARDWARE CONFIGURATION and ADD NEWEST FUNCTIONS. The more FASTER and SMARTER CRP919EBT with 🔥Bluetooths & USB 2-in-1 connect🔥Android 10.0 OS🔥2.0Ghz 4 core high efficiency processor 4GB RAM+64GB ROM large storage🔥6300mAh large battery, more stable and longer lasting diagnostics🔥VAG Guided🔥ECU Code🔥Bi-directional Control🔥35+ Resets🔥CANFD&DOIP🔥FCA AutoAuth🔥Full System Diagnostics🔥2 Yrs Update🔥Newly add BST360 battery tester & I-TPMS & VSP600 endoscope🔥23+ Languages. Provide an unparalleled diagnostic experience at an affordable price.
- 🚗【CAN FD & DOIP & FCA, SUPER PROTOCOL】LAUNCH X431 CRP919EBT is equipped with the DBSCAR VII Bluetooth connector supporting CANFD and DoIP. The CRP919EBT automotive diagnostic scanner supports CAN FD protocol (compatible with post-2020 GM vehicles). It also meets DoIP protocol requirements (adapter sold separately) for compatibility with BMW (E & F chassis) models from 2017 onward. Autoauth for FCA SGW supports FCA vehicles including Chrysler models from 2017 and later.
- ✔️【ADVANCED ECU CODE, ADAPTATION, CALIBRATION & INITIALIZATION】The LAUNCH X431 CRP919EBT automotive scanner delivers exceptional ECU code capabilities for customized vehicle setups. It provides dealer-level functionality to streamline maintenance and repairs, enabling ECU matching and learning for enhanced customization.
- 👍【BIDIRECTIONAL CONTROL, 4000+ ACTIVE TESTS】LAUNCH OBD2 scanner CRP919EBT features bi-directional control - the most demanded capability among mechanics. When headlights or windows malfunction, repairs can be costly. With CRP919EBT, execute ECU commands and assess repair status through systems including ABS, windows, valves, wipers, and headlights - streamlining diagnostics while slashing repair expenses.
- 🥇【35+ MOST POPULAR RESET SERVICE FOR 160 MAKES】Same as Snap-on scanners, CRP919EBT scan tool delivers 35+ reset functions for 160+ vehicle models, including: service oil reset, throttle adaptation, steering angle calibration, brake pad replacement code, tire pressure reset, ABS bleeding, battery registration, gear signal learning, and injector code, etc.
Last update on 2026-06-21 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.