“This site contains affiliate links for which OEMDTC may be compensated” |
September 19, 2022 NHTSA CAMPAIGN NUMBER: 22E076000
Helmets May Not Protect From Impact/FMVSS 218
A helmet that does not provide adequate impact protection increases the risk of injury during a crash.
NHTSA Campaign Number: 22E076
Manufacturer Blackbeards Motorcycle Gear, Inc.
Components EQUIPMENT
Potential Number of Units Affected 522
Summary
Blackbeards Motorcycle Gear, Inc. is recalling certain HamrHead HM-569 helmets in all sizes XXS through XXL, with a manufacture date of December 2020. The helmet may not adequately protect the wearer in the event of a head impact during a crash. As such, these helmets fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 218, “Motorcycle Helmets.”
Remedy
Blackbeards will provide a full refund of the purchase price. Owner notification letters were mailed November 1, 2022. Owners may contact Blackbeards’ customer service at 1-888-878-5281. Blackbeards’ number for this recall is HM5691220.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
BLACKBEARDS MOTORCYCLE GEAR
PO Box 574, Beaufort SC 29901
IMPORTANT SAFETY RECALL
NHTSA Recall No. 22E076
November 1, 2022
Dear Consumer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
WHY IS THIS RECALL BEING CONDUCTED? Blackbeard’s Motorcycle Gear has determined that HamrHead Model HM‐
569 in sizes Medium and XL manufactured in December 2020 failed to conform to Federal Motor Vehicle Safety
Standards (FMVSS) No. 218. Specifically, random samples of the sizes Medium and XL did not meet all S5.1 Impact
Attenuation and S5.2 Penetration compliance standards upon laboratory testing in certain environmental conditions. Helmets affected have a manufacture date of December 2020 that can be found on the warning label inside the helmet. Blackbeards Motorcycle Gear has decided to recall all sizes of the HM‐569 manufactured in December 2020 out of an abundance of caution.
SAFETY RISK: By wearing a noncompliant helmet, the user may not be adequately protected in the event of a crash, increasing the risk of possible personal injury in certain types of accidents.
REMEDY: If you own a HamrHead HM‐569 motorcycle helmet in any size with a manufacture date of December 2020, the manufacturer will send you a refund of the purchase price upon return of the helmet to us. You can check the model number and manufacture date by examining the safety label inside your helmet. This remedy will cost you nothing. The shipping costs to return your helmet will also be covered. After you contact our Recall Services
Department, and your item is verified as being included in this recall, you will receive detailed instructions on preparing your helmet for shipment and returning it to us. Within 15 days of the Recall Services Department receiving your item, a refund will be mailed to you.
WHAT SHOULD YOU DO? Please contact the Recall Services Department in one of the following ways:
By Mail:
Blackbeards Motorcycle Gear
Recall Services Department
PO Box 574
Beaufort, SC 29901
By email: recalls@blackbeardsgear.com
Please be prepared to provide the following information: Original Billing and Shipping Name and Address, Email
Address, Order number, Helmet Model and Size, Original date of purchase, Current correct mailing address
If you have questions or concerns about this recall, you may contact our Recall Information Center at 888‐878‐5281 or email us at: recalls@blackbeardsgear.com
If our Recall Services Department fails or is unable to remedy your recall without charge within a reasonable amount of time, you may contact NHTSA at the address below.
Administrator
National Highway Traffic Safety Administration
1200 New Jersey AVE SE Washington, DC 20590
You may also call the toll‐free Vehicle Safety Hotline at 1‐888‐327‐4236 (TTY: 1‐800‐424‐9153) or go to www.safercar.gov.
We apologize for any inconvenience and thank you for your attention to this safety matter.
Sincerely,
Blackbeards Motorcycle Gear
Chronology :
We were notified on 9/2/2022 by Manuel Maldonado with report # 218-ACT-22-006 and # 218-ACT-22-005 describing test results with specified failures.
1 Affected Product
Equipment
BRAND | PART NO. | PRODUCTION DATES |
HAMRHEAD | HM-569 |
4 Associated Documents
Recall Acknowledgement
RCAK-22E076-1631.pdf 823.244KB
Noncompliance Notice 573 Report
RCLRPT-22E076-5997.PDF 242.506KB
Recall 573 Report – September 22, 2022
RCLRPT-22E076-9113.PDF 242.572KB
ISSUED Owner Notification Letter(Part 577)
RCONL-22E076-1693.pdf 77.141KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22E076&docType=RCL
- High Resistance ABS Shell With Micrometrically Adjustable Strap
- Meets or Exceeds FMVSS-218 and DOT Safety Standards
- Helmet Liner / Cheek Pads are Lightweight, Soft and Easily Removable and Washable
- Sleek and Lightweight Design Reduces Wind Noise
- Modular Flip-Up Function Anti-Scratch, Anti-Fog and Wide View Clear Visor
- Boasting a compact, aerodynamic DOT shell design with sharp and aggressive styling for impeccable impact protection to excel whether short-distance street performance or long-distance touring comfort.
- Multiple conscientiously designed ventilation panels effective in streamlining the cooling process to assist with freshening the rider's experience. Large lower vent shutters for ease of use with riding gloves.
- Trendsetting springs for precise functionality ensuring a superior wind and water sealant layer. Unique 3D molded shield designed to ensure a distortion-free view throughout the entire field of vision.
- Removable Breath Guard rerouting the rider’s breath to reduce shield fogging. Inserted Chin Curtain designed to reduce wind turbulence and noise. Quick-Release Chin Strap for effortless usage.
- Fully removable, washable, and replaceable microfiber inner material that absorbs sweat without compromising comfort or security.
- 【Lightweight】Ultra Lightweight and Durable ABS Shell + Multi-Density EPS liner to meet or exceed FMVSS-218 and DOT Safety Standards.
- 【Ventilated】Multiple vents for optimum ventilation and quick release metal buckle offer solid protection.
- 【Removable & Washable】Equipped with fully removable, washable, and replaceable inner liners that are breathable and absorb sweat.
- 【Protective】The helmet comes with One tinted shield which is on the helmet, beautiful glossy UV protective finish.
- 【Detachable】The nose protector on the helmet can be removed if you needn't it.
- Advanced Safety Design: Combines a lightweight ABS outer shell with a high-density inner shell for top-tier head protection.
- DOT Approved, Clear Vision: Meets DOT standards, available in Size S (58-60CM/22.8-23.6 Inch), with a scratch-resistant, anti-fog lens for optimal visibility.
- Easy Quick Release: Convenient quick-release chin strap with adjustable features for effortless and speedy helmet adjustments and removal.
- Comfort Tech Wick-Dri System: Enjoy superior comfort with a removable head liner designed for a personalized fit within the shell configurations.
- Sun Visor for Added Protection: Built-in pull-down sun visor system provides effective sun protection, ensuring a comfortable and shaded ride.
- 【High-quality Material】 Safety material, ABS engineering material, breathable, odorless, impact resistance, high heat resistance, high strength, light weight, enhancing safety and comfort during riding.
- 【Helmet cushioning layer】The high-density EPS cushioning layer can better cushion the impact force, effectively absorb the external impact force, reduce the impact of the head.
- 【Comfortable texture lining】 mesh structure breathable lining, more comfortable and fashionable, high-density fiber tissue, sweat-absorbing and odor-proof, ensuring safety and taking into account the breathability of the helmet.
- 【Scope of Application】The german motorcycle helmet weighs only 1 pounds, which helps to reduce neck fatigue during long-distance travel or urban cycling commuters. This helmet for adults, youth, men and women. Motorcycles, mopeds, bicycles, cruisers, chopper, scooters.
- 【Customer Service】We have full confidence in the quality of half helmet, If you encounter any problems, please feel free to contact our customer support! We will provide you with the perfect solution! 100% satisfaction guaranteed, please rest assured to buy.
- DOT Certified - Your Safety Comes First: Favoto full face motorcycle helmet is DOT approved and compliant with the FMVSS 219 Standard. Crafted with a robust ABS shell and fortified with a high-density EPS cushion layer, it provides unmatched protection for riders.
- Lightweight Design for Comfortable Rides: Weighing a mere 2.76 lbs, our helmet is meticulously designed to alleviate pressure on your head and shoulders. Bid farewell to discomfort during extended rides, especially in the neck area, enabling you to effortlessly tackle long journeys with ease.
- Aerodynamic Ventilation for Uninterrupted Journeys: Our helmet features strategically positioned vents on the front, top, and back to keep you cool during demanding rides. With an innovative one-handed control, you can effortlessly open or close the ventilation slits, reducing wind resistance and minimizing road noise for an undistracted journey.
- Washable and Comfortable Inner Liners: The interior of our helmet is adorned with ultra-soft, breathable inner liners that conform to your facial contours and head shape. These removable liners not only ensure a perfect fit but are also conveniently washable. The quick-release buckle on the chin strap adds to the convenience of wearing and removing the helmet.
- Find Your Perfect Fit with Multiple Sizes: Available in M (57-58 CM, 22 2/5-22 4/5 INCH), L (59-60 CM, 23 1/5-23 1/2 INCH), XL (61-62 CM, 24-24 3/8 INCH), and XXL (63-64 CM, 24 3/4-25 1/5 INCH) sizes. Refer to the size chart to choose the helmet that perfectly suits you.
- DOT Approved; Size L (57-58 CM,22.4/22.8 Inch)
- Advanced Modular/Flip up and Dual Lens Design (inner smoked lens/outer clear shield);
- Light Weight Durable Aerodynamic Thermoplastic Alloy Shell
- One Extra Spoiler Included, Easy Conversion Between Street and Sports Style
- Removable and Washable Padding
- ABS shell: Safety material, ABS engineering material, breathable, odorless, impact resistance, high heat resistance, high strength, light weight, enhancing safety and comfort during riding.
- Comfortable to Wear: Motorcycle open face half helmet is equipped with an adjustable quick release chin strap, excellent wearing feeling, The helmet use comfortable and soft lining, breathable, sweat-absorbing, ensuring safety and taking into account the breathability of the helmet.
- Lightweight Design: The beanie helmet weighs only 850g to reduce fatigue caused by nerve pressure for long-distance motorbike or urban cycling commuters.
- Safe Riding Skull Cap: Skull cap helmet can be used by adult men and women. It is suitable for motorcycles, scooters, street cars, mopeds, Four-wheeled vehicle.
- After-sales Service: If the helmet size is not suitable, we provide free replacement service. Before confirming that the helmet is suitable, try to keep the packaging intact, so as not to affect the exchange, thank you for your understanding.
Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
BLACKBEARDS MOTORCYCLE GEAR
PO Box 574, Beaufort SC 29901 IMPORTANT SAFETY RECALL
NHTSA Recall No. 22E076 November 1, 2022
Dear Consumer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
WHY IS THIS RECALL BEING CONDUCTED? Blackbeard’s Motorcycle Gear has determined that HamrHead Model HM‐ 569 in sizes Medium and XL manufactured in December 2020 failed to conform to Federal Motor Vehicle Safety Standards (FMVSS) No. 218. Specifically, random samples of the sizes Medium and XL did not meet all S5.1 Impact Attenuation and S5.2 Penetration compliance standards upon laboratory testing in certain environmental conditions. Helmets affected have a manufacture date of December 2020 that can be found on the warning label inside the helmet. Blackbeards Motorcycle Gear has decided to recall all sizes of the HM‐569 manufactured in December 2020 out of an abundance of caution.
SAFETY RISK: By wearing a noncompliant helmet, the user may not be adequately protected in the event of a crash, increasing the risk of possible personal injury in certain types of accidents.
REMEDY: If you own a HamrHead HM‐569 motorcycle helmet in any size with a manufacture date of December 2020, the manufacturer will send you a refund of the purchase price upon return of the helmet to us. You can check the model number and manufacture date by examining the safety label inside your helmet. This remedy will cost you nothing. The shipping costs to return your helmet will also be covered. After you contact our Recall Services Department, and your item is verified as being included in this recall, you will receive detailed instructions on preparing your helmet for shipment and returning it to us. Within 15 days of the Recall Services Department receiving your item, a refund will be mailed to you.
WHAT SHOULD YOU DO? Please contact the Recall Services Department in one of the following ways:
By Mail:
Blackbeards Motorcycle Gear Recall Services Department PO Box 574
Beaufort, SC 29901
By email: recalls@blackbeardsgear.com
Please be prepared to provide the following information: Original Billing and Shipping Name and Address, Email Address, Order number, Helmet Model and Size, Original date of purchase, Current correct mailing address
If you have questions or concerns about this recall, you may contact our Recall Information Center at 888‐878‐5281 or email us at: recalls@blackbeardsgear.com
If our Recall Services Department fails or is unable to remedy your recall without charge within a reasonable amount of time, you may contact NHTSA at the address below.
Administrator
National Highway Traffic Safety Administration 1200 New Jersey AVE SE Washington, DC 20590
You may also call the toll‐free Vehicle Safety Hotline at 1‐888‐327‐4236 (TTY: 1‐800‐424‐9153) or go to www.safercar.gov.
We apologize for any inconvenience and thank you for your attention to this safety matter. Sincerely,
Blackbeards Motorcycle Gear
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 22E-076
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Blackbeards Motorcycle Gear, Inc. SEP 22, 2022 NHTSA Recall No. : 22E-076 Manufacturer Recall No. : HM5691220 Manufacturer Information :
Manufacturer Name : Blackbeards Motorcycle Gear, Inc.
Address : BOX 574
Beaufort SC 29901 Company phone : 8557553 Population :
Number of potentially involved : 522 Estimated percentage with defect : 100 %
Equipment Information : Brand / Trade 1 :
Model : HamrHead HM-569 Part No. : – Size : XXS-XXL Function : NR
Descriptive Information : This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Entire imported population of this model will be recalled. Production Dates : DEC 14, 2020 – DEC 16, 2020
Description of Noncompliance :
Description of the Noncompliance :
Blackbeard’s Motorcycle Gear has determined that Model: HM-569 in sizes Medium and XL manufactured in December 2020 failed to conform to Federal Motor Vehicle Safety Standards (FMVSS) No. 218. Specifically, random samples of the sizes Medium and XL did not meet all S5.1 Impact Attenuation and S5.2 Penetration standards upon laboratory testing in certain environmental conditions.
Helmets affected have a manufacture date of December 2020 which can be found on the warning label inside the helmet.
Blackbeards Motorcycle Gear has decided to recall all sizes of the HM-569 manufactured in December 2020 out of an abundance of caution. FMVSS 1 : 218 – Motorcycle helmets FMVSS 2 : NR
Description of the Safety Risk : By wearing a noncompliant helmet, the user may not be adequately protected Part 573 Safety Recall Report 22E-076 Page 2 Description of the Safety Risk : in the event of a crash, increasing the risk of possible personal injury in
certain types of accidents.
Description of the Cause : Quality lapses in fabrication of shell thickness most likely caused by factory operating with limited resources and greatly reduced staffing during the height of the Covid pandemic in China in the fall and winter of 2020. Identification of Any Warning NR
that can Occur : Involved Components : Component Name : HAMRHEAD Component Description : HELMET Component Part Number : HM-569 Supplier Identification : Component Manufacturer
Name : Asia Fiberglass Manufacturing co., Ltd.
Address : Ecological Farm Liuminying
Zhangziyingzhen Daxing Dis Beijing Foreign States 102615 Country : China Chronology :
We were notified on 9/2/2022 by Manuel Maldonado with report # 218-ACT-22-006 and # 218-ACT-22-005 describing test results with specified failures. Description of Remedy :
Description of Remedy Program : Blackbeards Motorcycle Gear will notify all identifiable owners by direct
mail. Owners will be instructed to return the recalled helmet at no charge to them to obtain a full refund of the purchase price. How Remedy Component Differs NR from Recalled Component :
Identify How/When Recall Condition NR was Corrected in Production : The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 22E-076
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Recall Schedule :
Description of Recall Schedule : Blackbeards Motorcycle Gear requires that all consumers call our recall
services number at 1-888-878-5281 or email us at recalls@blackbeardsgear.com to verify that the item purchased is part of this recall, and obtain an RA number before returning the recalled helmet. Once an RA number is issued, Blackbeards Motorcycle Gear will send a prepaid return label for the consumer to use to return the recalled helmet to us at no charge to the consumer. The refund will be processed within 10 days after we receive the recalled item. Blackbeards did not sell to any dealers or distributors so there will be no dealer notifications.
Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : NOV 01, 2022 –
NOV 15, 2022
Purchaser Information :
The following manufacturers purchased this defective/noncompliant equipment for possible use or installation in new motor vehicles or new items of motor vehicle equipment:
Name : NR Address : NR
NR Country : NR Company Phone : NR
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 22E-076
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Blackbeards Motorcycle Gear, Inc. SEP 19, 2022 NHTSA Recall No. : 22E-076 Manufacturer Recall No. : HM5691220 Manufacturer Information :
Manufacturer Name : Blackbeards Motorcycle Gear, Inc.
Address : BOX 574
Beaufort SC 29901 Company phone : 8557553 Population :
Number of potentially involved : 522 Estimated percentage with defect : 100 %
Equipment Information : Brand / Trade 1 :
Model : HamrHead HM-569 Part No. : HM-569 Size : XXS-XXL Function : NR
Descriptive Information : This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Entire imported population of this model will be recalled. Production Dates : DEC 14, 2020 – DEC 16, 2020
Description of Noncompliance :
Description of the Noncompliance :
Blackbeard’s Motorcycle Gear has determined that Model: HM-569 in sizes Medium and XL manufactured in December 2020 failed to conform to Federal Motor Vehicle Safety Standards (FMVSS) No. 218. Specifically, random samples of the sizes Medium and XL did not meet all S5.1 Impact Attenuation and S5.2 Penetration standards upon laboratory testing in certain environmental conditions.
Helmets affected have a manufacture date of December 2020 which can be found on the warning label inside the helmet.
Blackbeards Motorcycle Gear has decided to recall all sizes of the HM-569 manufactured in December 2020 out of an abundance of caution. FMVSS 1 : 218 – Motorcycle helmets FMVSS 2 : NR
Description of the Safety Risk : By wearing a noncompliant helmet, the user may not be adequately protected Part 573 Safety Recall Report 22E-076 Page 2 Description of the Safety Risk : in the event of a crash, increasing the risk of possible personal injury in
certain types of accidents.
Description of the Cause : Quality lapses in fabrication of shell thickness most likely caused by factory operating with limited resources and greatly reduced staffing during the height of the Covid pandemic in China in the fall and winter of 2020. Identification of Any Warning NR
that can Occur : Involved Components : Component Name : NR Component Description : NR Component Part Number : NR Supplier Identification : Component Manufacturer
Name : Asia Fiberglass Manufacturing co., Ltd.
Address : Ecological Farm Liuminying
Zhangziyingzhen Daxing Dis Beijing Foreign States 102615 Country : China Chronology :
We were notified on 9/2/2022 by Manuel Maldonado with report # 218-ACT-22-006 and # 218-ACT-22-005 describing test results with specified failures. Description of Remedy :
Description of Remedy Program : Blackbeards Motorcycle Gear will notify all identifiable owners by direct
mail. Owners will be instructed to return the recalled helmet at no charge to them to obtain a full refund of the purchase price. How Remedy Component Differs NR from Recalled Component :
Identify How/When Recall Condition NR was Corrected in Production : The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 22E-076
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Recall Schedule :
Description of Recall Schedule : Blackbeards Motorcycle Gear requires that all consumers call our recall
services number at 1-888-878-5281 or email us at recalls@blackbeardsgear.com to verify that the item purchased is part of this recall, and obtain an RA number before returning the recalled helmet. Once an RA number is issued, Blackbeards Motorcycle Gear will send a prepaid return label for the consumer to use to return the recalled helmet to us at no charge to the consumer. The refund will be processed within 10 days after we receive the recalled item.
Planned Dealer Notification Date : NR – NR
Planned Owner Notification Date : OCT 19, 2022 – NOV 15, 2022 Purchaser Information :
The following manufacturers purchased this defective/noncompliant equipment for possible use or installation in new motor vehicles or new items of motor vehicle equipment:
Name : NR Address : NR
NR Country : NR Company Phone : NR
* NR – Not Reported
SEOCONTENT-END