24E13 Emissions

NHTSA ID Number: 11017470

Manufacturer Communication Number: 24E13

TSB/Document Date: 2025-05-02

Summary

Certain 2018-2021 Model Year Expedition Vehicles equipped with a 3.5L EcoBoost Engine Powertrain Control Module (PCM) Reprograming

If the PDF is very large, it may not load in the preview below.

Taking too long?

Reload document

Open in new tab

Download [569.18 KB]

If the (TSB) Technical Service Bulletin/Document PDF does not show in the preview, download or view it on the NHTSA Website

Click on the (+) Plus Sign

Then Click on Associated Document(s)

More Information on this Technical Service Bulletin (TSB) on the NHTSA Website

View or Download (TSB) Technical Service Bulletin PDF

Search NHTSA Database for Recalls

View Latest Recalls

Search NHTSA Database for Vehicle Investigations

View Latest Vehicle Investigations

Search NHTSA Database for Vehicle Complaints

View Latest Vehicle Complaints

TSB/Document ID: 24E13
- Identifier the manufacturer uses to identify the communication and the way it can be located by those searching for it.

Replacement Service Bulletin Number:
- Replacement service bulletin number.

MFR Communication Date: 2025-04-17
- Date the communication was disseminated by the manufacturer.

MFR Internal Campaign ID/Software Version:
- Manufacturer's unique identifier for the service campaign if this communication is a related one.

Communication Type: Emissions

- Service Bulletin / Repair Instructions
- Service Campaign
- Warranty Program / Extension
- Over The Air
- Emissions
- Other

NHTSA Components: UNKNOWN OR OTHER
- NHTSA Component(s) of the products involved in communications.

MFR Component System:
- Manufacturer's top-level component of the products involved in communications.

MFR Component Subsystem:
- Manufacturer's component subsystem of the top-level component identified above.

Service Engineering Operations
Customer Service Division

Ford Motor Company
PO Box 1904
Dearborn, Michigan 48121

April 16, 2025

TO:

All U.S. Ford and Lincoln Dealers

SUBJECT:

NEW VEHICLE DELIVERY HOLD - Emission Recall 24E13
Certain 2018-2021 Model Year Expedition Vehicles equipped with a 3.5L EcoBoost
Engine
Powertrain Control Module (PCM) Reprograming

AFFECTED VEHICLES
Vehicle

Model Year

Assembly Plant

Build Date Range

Expedition

2018-2021

Kentucky Truck

March 14, 2017 through December 27, 2021

US population of affected vehicles: 319,160. Affected vehicles are identified in OASIS and FSA VIN
Lists.
REASON FOR THIS EMISSION RECALL
The affected vehicles have an On-Board Diagnostics (OBD) system that may falsely set the catalytic
converter Diagnostic Trouble Code (DTC) P0430 – Catalyst System Efficiency Below Threshold,
causing the Malfunction Indicator Light (MIL) to illuminate even though a repair may be unnecessary.
SERVICE ACTION
Before delivering any new in-stock vehicles involved in this recall, dealers are to update the
Powertrain Control Module (PCM) software as described in the accompanying technical instructions.
This service must be performed at no charge to the vehicle owner. For new vehicle storage
guidelines, refer to EFC13033, Storage Guidelines for New Vehicles.
NOTE: The State of California and the Commonwealth of Massachusetts require the completion of
emission recall repairs before vehicle registration renewal. For vehicles registered in these states,
please download and print a blank Vehicle Emissions Recall Proof of Correction Certificate (refer to
EFC15625 – Proof of Correction Policy Update Effective October 21, 2024, for further details), and
then provide the owner with a completed Proof of Correction certificate after the repair has been
performed. If necessary, these certificates can still be obtained by contacting your regional office.
To assist vehicle owners to have this repair completed when parts are available, dealers should:
• Arrange for a mobile repair at the owner’s location, or:
• Arrange to pick up the owner’s vehicle and drive it to the dealership for repairs
o Re-deliver the owner’s vehicle after repairs have been completed.
• Pick-Up & Delivery and mobile service should be made available for all customers. Refer to
the Rental and Claiming sections for further details.

OWNER NOTIFICATION MAILING SCHEDULE
Owner letters are expected to be mailed by the week of May 5, 2025. Dealers should repair any
affected vehicles that arrive at their dealerships, whether or not the customer has received a letter.
PLEASE NOTE:
The sale of uncorrected new vehicles to customers could lead to penalties under applicable
state and Federal regulations. Correct all vehicles in your new vehicle inventory before
delivery.
ATTACHMENTS
• Administrative Information
• Labor Allowances and Parts Ordering Information
• Technical Instructions
• Mobile Service Repair Assessment
• Mobile Repair/Vehicle Pick-Up & Delivery Record
• Owner Notification Letters
QUESTIONS & ASSISTANCE
For questions and assistance, contact the Special Service Support Center (SSSC) via the SSSC Web
Contact Site. The SSSC Web Contact Site can be accessed through the Professional Technician
System (PTS) website using the SSSC link listed at the bottom of the OASIS VIN report screen or
listed under the SSSC tab.

Customer Service Division

Administrative Information
Page 1 of 4
Emission Recall 24E13
MOBILE SERVICE REPAIR ASSESSMENT LEVEL
• All repairs in this program have the following assessment level:
- Mobile Reprogramming
MOBILE REPAIR RECOMMENDATIONS
• Confirm with the customer a mobile repair is feasible.
• Check OASIS before going to the customer’s home or business to confirm if any other
outstanding FSA needs to be completed.
• Transportation – due to the simplicity of this repair, a specialty vehicle is not required.
MOBILE REPAIR ADDITIONAL INFORMATION
Please ensure the technician brings the following to the mobile repair destination:
• Printed Technical Instructions
• Printed Repair/Work Order or any other necessary documentation as customer copy(s)
o Documents could also be emailed to the customer.
• Shirt/uniform and vehicle graphic with the dealership or Ford logos are recommended.
MOBILE REPAIR QUESTIONS AND ASSISTANCE
• For questions and assistance, contact the Special Service Support Center (SSSC) via the
SSSC Web Contact Site. Work with Dealership warranty administrator to create a SSSC
contact ID#.
• Once an SSSC agent responds to the new contact ID#, you may opt to call the SSSC hotline:
(800) 325-5621.
OASIS ACTIVATION
OASIS will be activated on April 16, 2025.
FSA VIN LISTS ACTIVATION
FSA VIN Lists will be available through https://web.fsavinlists.dealerconnection.com on April 16, 2025.
Owner names and addresses will be available by May 23, 2025.
NOTE: Your FSA VIN Lists may contain owner names and addresses obtained from motor vehicle
registration records. The use of such motor vehicle registration data for any purpose other than in
connection with this recall is a violation of law in several states, provinces, and countries. Accordingly,
you must limit the use of this listing to the follow-up necessary to complete this recall.
SOLD VEHICLES
• Ford has not issued instructions to stop selling/delivering or driving used vehicles under this
emission recall. Owners should contact their dealers for an appointment to have their vehicles
remedied as soon as practicable.
• Immediately contact any of your affected customers whose vehicles are not on your VIN list
but are identified in OASIS. Give the customer a copy of the Owner Notification Letter (when
available) and schedule a service date.
• Correct other affected vehicles identified in OASIS which are brought to your dealership.
• Dealers are to prioritize repairs of customer vehicles over repairs of new and used vehicle
inventory.

Administrative Information
Page 2 of 4
Emission Recall 24E13
STOCK VEHICLES
• Use OASIS to identify and correct all affected vehicles in your new and used vehicle inventory.
BRANDED / SALVAGED TITLE VEHICLES
Affected branded / salvaged title vehicles are eligible for this recall.
OWNER REFUNDS
Refunds are not approved for this program.
RENTAL VEHICLES
Rental vehicles are not approved for this program.
MOBILE SERVICE CLAIMING QUESTIONS
Dealers participating in the 2025 Remote Experience Program:
• Ford and Lincoln Dealers - refer to EFC16393, Announcing the 2025 Remote Experience
Program.
Dealers NOT participating in the 2025 Remote Experience Program:
•

For questions and assistance, contact the Special Service Support Center (SSSC) via the
SSSC Web Contact Site. Work with the Dealership warranty administrator to create an SSSC

•

contact ID#.
Once an SSSC agent responds to the new contact ID#, you may opt to call the SSSC hotline:
(800) 325-5621.

FORD PICK-UP & DELIVERY
• Dealers participating in the 2025 Remote Experience Program:
o Refer to EFC16393, Announcing the 2025 Remote Experience Program for additional
details.
• Dealers NOT participating in the 2025 Remote Experience Program:
o Dealers may claim one-half labor hour per repair for vehicle Pick-Up & Delivery
services.
o Dealers must retain a Vehicle Pick-Up & Delivery Record with the repair order
documentation.

Administrative Information
Page 3 of 4
Emission Recall 24E13
ADDITIONAL REPAIR (LABOR TIME AND/OR PARTS)
Additional repairs identified as necessary to complete the FSA should be managed as follows:
• For related damage and access time requirements, refer to the Warranty and Policy Manual /
Section 6 – Ford & Lincoln Program Policies / General Information & Special Circumstances
for FSAs / Related Damage.
• For software module replacement:
o If module replacement is required, confirm if a Repair Validation Code (RVC) is
required. Reference PTS / Technical Assistance / Components Requiring a Repair
Validation Code.
o Claiming the MT24E13RR labor operation code does not require an RVC code if no
module replacement is required, however, clock times should be consistent with
vehicle history on PTS.
• For vehicles within new vehicle bumper-to-bumper warranty coverage, no SSSC
approval is required, although related damage must be on a separate repair line with the
“Related Damage” radio button checked.
o Ford vehicles – 3 years or 36,000 miles
• For vehicles outside new vehicle bumper-to-bumper warranty coverage:
o Submit an Approval Request to the SSSC Web Contact Site before completing the
repair.
CLAIMS PREPARATION AND SUBMISSION
• Technician Competency Requirement: The STST Competency 10 certification requirement
in the U.S. market only will be enforced starting with repair orders opened on or after August
31, 2024. FSA repairs will reject, and the claim will not be paid if the repairing technician is not
certified in STST Competency 10 FSA. See EFC15936 for more details.
• Software Verification Approval Code Requirement: Beginning with Repair Orders (ROs)
opened on or after January 15th, 2025, new FSA software repairs and the first phase of
already launched FSAs will require Software Verification and an approval code provided by
Ford. The approval code will be required when performing software repairs using the FDRS
and IDS. See EFC16335 for more details.
• Claim Entry: Enter claims using Dealer Management System (DMS) or One Warranty
Solution (OWS) online.
o When entering claims, select claim type 31: Field Service Action. The FSA number
24E13 is the subcode.
o For additional claims preparation and submission information, refer to the Recall and
Customer Satisfaction Program (CSP) Repairs in the OWS User Guide.
• Related Damage/Additional labor and/or parts: Must be claimed as Related Damage on a
separate repair line from the FSA with the same claim type and subcode as described in Claim
Entry above.
IMPORTANT: Click the Related Damage Indicator radio button.

Administrative Information
Page 4 of 4
Emission Recall 24E13
CLAIMS PREPARATION AND SUBMISSION (continued)
• Ford Pick-Up & Delivery:
o Dealers participating in the 2025 Remote Experience Program:
 Refer to EFC16393, Announcing the 2025 Remote Experience Program for
additional details.
o Dealers NOT participating in the 2025 Remote Experience Program:
 Dealers may claim one-half labor hour per repair for vehicle Pick-Up & Delivery
services.
 Dealers must retain a Vehicle Pick-Up & Delivery Record with the repair order
documentation.
• Mobile Repair:
o Dealers participating in the 2025 Remote Experience Program –
 Ford and Lincoln - Refer to EFC16393, Announcing the 2025 Remote
Experience Program for additional details.
o Dealers NOT participating in the 2025 Remote Experience Program –
 Mobile repair allowances can be claimed for dealer-performed mobile repairs.
Dealers that are working with Ford-contracted mobile repair companies should
refer to those companies for claiming instructions.
 For dealer-performed mobile repairs, retain a copy of the Service Management
signed record (see Repair Procedure Improvement & Revised Labor Time),
with the repair order documentation.
 Claim the mobile repair allowance Labor Operation Code 24E13MM along with
the applicable Labor Operation Code for the repair (refer to the Labor
Allowances table in Labor Allowances and Parts Ordering Information).

Labor Allowances and Parts Ordering Information
Page 1 of 1
Emission Recall 24E13
LABOR ALLOWANCES
Description

Labor Operation

Labor Time

2018-2019 Expedition: Update the PCM and TCM software
using the FDRS scan tool (coordinated flash).

24E13B

0.4 Hours

2020-2021 Expedition: Update the PCM software using the
FDRS scan tool.

24E13C

0.4 Hours

MT24E13RR

Up to 4.5 Hours

24E13MM

0.5 Hours

24E13PP

0.5 Hours

PCM software failed and/or PCM module replacement
required.
SSSC approval is not required unless M-Time is exceeded.
Clock times should be consistent with vehicle history on
PTS.
Mobile Service:
This allowance is only for non-eligible 2025 Remote
Experience Program Dealers.
Can be used when the repair takes place away from the
dealership.
If Additional Time is Required Due to Travel, Please Submit
an SSSC Approval Form.
Ford Vehicle Pick-Up & Delivery Allowance:
This allowance is only for non-eligible 2025 Remote
Experience Program Dealers.
NOTE: This allowance is for dealer-performed vehicle PickUp & Delivery for dealership repairs only. Can only be
claimed once, regardless of outstanding FSAs repaired.
PARTS REQUIREMENTS / ORDERING INFORMATION
Parts are not required to complete this repair.

Emission Recall 24E13

Mobile Repair / Vehicle Pick-Up and Delivery Record
VIN ____________________________ received (check one):
☐ Mobile Repair

☐ Pick-up and/or delivery service

As outlined below for the 24E13 Field Service Action program.
☐ Mobile Repair – Date: _______________
OR
☐ Pick-up

– Date: _______________

☐ Delivery

– Date: _______________

Repair Order #

Repair Order Date

Service Manager Signature

Date

Mobile Service Repair Assessment
Page | 1
NEW VEHICLE DELIVERY HOLD - Emission Recall 24E13
Certain 2018-2021 Model Year Expedition Vehicles equipped with a 3.5L EcoBoost Engine
Powertrain Control Module (PCM) Software Update
Mobile Service Repair Assessment
Assessment levels have been identified to help determine the ease of performing eligible mobile
service repairs for a Field Service Action (FSA) outside of the dealership service facility.
Dealer Bulletin
Within the Administrative Information Attachment of the dealer bulletin a mobile service repair
assessment level(s) will be provided. These assessment levels have been determined using the
amount of time, equipment and labor identified to perform the intended service action.
Assessment Levels
- Mobile Reprogramming (MRA1)
- Light Mobile Service (MRA2)
- Enhanced Mobile Service (MRA3)
- Advanced Mobile Service (MRA4)
- Not a Mobile Service Repair (MRA5)
- Wheel and Tire Mobile Service (MRA6)
- Advanced Driver Assistance System (ADAS) Mobile Repair (MRA7)
Description of each level that is used to determine the overall assessment.
– Mobile Reprogramming (MRA1)
• Module Programming or similar type services
• Minimum tools maybe required other than an IDS/FDRS setup
• FDRS programming that requires internet connection (wi-fi or mobile hotspot)
• Make sure vehicle has a charge port to ensure battery voltage is maintained during
flashing of the module(s)
• Repairs not greater than 1 hour in length (including time to wait for programming)
Note: The location will need a charging station or wall box to maintain the 12-volt battery.
•
•
•
•

– Light Mobile Service (MRA2)
Interior repair procedures that do not require seat, dash, or headliner removal
Under hood repairs that do not require large component removal
Exterior repairs that do not require large component/panel removal
Repairs may require standard hand tools (Access to a Technician starter kit or similar)

Mobile Service Repair Assessment
Page | 2
NEW VEHICLE DELIVERY HOLD - Emission Recall 24E13
Certain 2018-2021 Model Year Expedition Vehicles equipped with a 3.5L EcoBoost Engine
Powertrain Control Module (PCM) Software Update
– Enhanced Mobile Service (MRA3)
A two-person process is required anytime a procedure requires work under the
vehicle
• Brake Inspection and Brake Repair/Replacement
• Limited Suspension Component replacement (no alignment)
• Under Vehicle access for limited repairs (no large component removal)
• Vehicle Check Up - VCU
• Pre-Delivery Inspection - PDI
• Used Car Inspection/Presale Inspection
• May require floor jack, jack stands, and impact tools
Note: Wheel lock may be required.
•

•
•
•

– Advanced Mobile Service (MRA4)
Fluid Exchange/Oil Change
Light Repairs
Brake Hydraulic Repairs

– Not a Mobile Service Repair (MRA5)
1. Large component removal
2. BEV Battery Replacement
3. Requires a vehicle hoist – to complete the repair (more than inspection)
4. Required vehicle alignment
5. Requires significant vehicle disassembly
6. Repairs greater than 2-3 hours
7. Any repairs that require M-Time
8. Includes a service procedure where the vehicle owner may be distressed about the state
of their vehicle.
– Wheel and Tire Mobile Service (MRA6)
• Tire Removal from Wheel
• Tire Balancing
• Tire Repair
Note: Specialized Mobile Service unit and equipment including Tire balancer and Tire
Changer required.
– Advanced Driver Assistance System (ADAS) Mobile Repair (MRA7)
• Requires the uses of a ADAS Mobile Service Kit.
• May require a post repair test drive.
o Parking Lot Maneuvers to capture parking lines for camera alignment.
o Steady speed cruising (45 MPH).
• The vehicle service location will have to be validated before scheduling an
appointment to determine if a mobile repair is appropriate.

TECHNICAL INSTRUCTIONS
PAGE 1 OF 3
EMISSIONS RECALL 24E13

CERTAIN 2018-2021 MODEL YEAR EXPEDITION VEHICLES EQUIPPED WITH
A 3.5L ECOBOOST ENGINE — POWERTRAIN CONTROL MODULE (PCM)
REPROGRAMMING
SERVICE PROCEDURE
IMPORTANT! The Service Technician Specialty Training (STST) Competency 10 certification

requirement in the U.S. market only will be enforced starting with repair orders
opened on or after August 31, 2024. Field Service Action (FSA) repairs will reject

and the claim will not be paid if the repairing technician is not certified in STST

Competency 10 FSA. See Electronic Field Communication (EFC)15936 for more

details.

Module Programming
NOTE: Program appropriate vehicle modules before performing diagnostics and clear all Diagnostic
Trouble Codes (DTCs) after programming. For DTCs generated after programming, follow normal
diagnostic service procedures.
1. Connect a battery charger to the 12 Volt (V) battery.
• Use of a heavy-duty charger is recommended to maintain proper battery voltage during this
procedure.
NOTE: Verify the negative cable of the charger is installed on a chassis or engine ground and not
the 12V battery negative terminal to prevent the battery saver mode from activating on the
vehicle.
NOTE: If the diagnostic software does not load or if the vehicle cannot be identified properly, make sure
there is a good internet connection and the Vehicle Communication Module (VCM) is properly
connected to the Data Link Connector (DLC).
2. Log into Ford Diagnostic and Repair System (FDRS).
NOTE: Vehicle information is automatically retrieved by the diagnostic software and a Network Test is
run. Vehicle identification data appears on the screen when this is complete.
3. Click Read VIN from Vehicle or manually enter the Vehicle Identification Number (VIN).
NOTE: Available modules are shown on the left hand (LH) side of the screen and available procedures
are listed on the right hand (RH) side of the screen. Modules that are communicating are
highlighted in green.
4. Select Toolbox tab.
5. From the list on the LH side of the screen, select the PCM.
6. From the list on the RH side of the screen, select PCM - Powertrain Control Module (PCM) Software
Update.
CPR © 2025 FORD MOTOR COMPANY
DEARBORN, MICHIGAN 48121
04/2025

TECHNICAL INSTRUCTIONS
PAGE 2 OF 3
EMISSIONS RECALL 24E13

7. Click RUN. Follow all on-screen instructions carefully.
8. When prompted with the question "Are you programming PCM to resolve engine shudder", select NO.
See Figure 1.

24107A

FIGURE 1
9. Continue to follow all on-screen instructions carefully.
NOTE: After the programming of the PCM, the FDRS will automatically prompt you to update the
necessary modules based on the vehicles options and calibration levels. Follow the on-screen
instructions to complete the update. You may be prompted to update one or more of the following
modules.

• Transmission Control module (TCM) (2018-2019 Expedition ONLY)

10. From the list on the RH side of the screen, select Self-Test and click RUN.
11. Click the Run Selected Tests button in the lower right.
STUD FOR
MISSING NUT
13. This FSA requires a Software Verification Approval Code after performing the software update.
Please follow the instructions in EFC 16335 to obtain the approval code. The claim will STUD
not FOR
MISSING
be paid and the FSA will remain open if a Software Verification Approval Code is not provided.NUT
12. Click the Clear & Retest button at the top of the screen to clear DTCs in all modules.

STUD FOR
14. Disconnect the battery charger from the 12V battery once the programming has completed.
MISSING NUT
NOTE: Advise the customer this vehicle is equipped with an adaptive transmission shift strategy
PLACE COPY HERE
which allows the vehicle's computer to learn the transmission's unique parameters and improve
shift quality. When the adaptive strategy is reset, the computer will begin a re-learning process.
PLACE COPY HERE
This re-learning process may result in firmer than normal upshifts and downshifts for several days.
PLACE COPY HERE

TECHNICAL INSTRUCTIONS
PAGE 3 OF 3
EMISSIONS RECALL 24E13

Important Information for Module Programming

NOTE: When programming a module, use the following basic checks to ensure programming completes
without errors.
• Make sure the 12V battery is fully charged before carrying out the programming steps and connect
FDRS/scan tool to a power source.
NOTE: A good internet connection is necessary to identify the vehicle and to load the diagnostic software.
• Inspect the Vehicle Communication Module II (VCM II)/Vehicle Communication Module III (VCM III) or
the Vehicle Communication and Measurement Module (VCMM) and the cables for any damage. Make
sure scan tool connections are not interrupted during programming.
• A hardwired connection is strongly recommended.
• Turn off all unnecessary accessories (radio, heated/cooled seats, headlamps, interior lamps, HVAC
system, etc.) and close doors.
• Turn the accessories back on after programming has completed.
• Disconnect/depower any aftermarket accessories (remote start, alarm, power inverter, CB radio,etc.).
• Follow all scan tool on-screen instructions carefully.
• Disable FDRS/scan tool sleep mode, screensaver, hibernation modes.
• Create all sessions key on engine off (KOEO). Starting the vehicle before creating a session will cause
errors within the programming inhale process.

Recovering a module when programming has resulted in a blank module
a. Disconnect the VCM II/VCM III or the VCMM from the data link connector (DLC) and your computer.
b. After ten seconds, reconnect the VCMII/VCMIII or the VCMM to the DLC and the PC. Launch FDRS.
The VCMII/VCMIII or the VCMM icon should turn green in the bottom right corner of the screen. If it
does not, troubleshoot the FDRS to VCM connection.
c. If you are using the same FDRS as the initial programming attempt, select the appropriate VIN from
the Vehicle Identification menu. If you are using a different FDRS, select “Read VIN from Vehicle”
and proceed through the Network Test.
d. In the Toolbox menu, navigate to the failed module and Download/Run Programmable Module
Installation (PMI). Follow the on-screen prompts. When asked if the original module is installed,
select “No” and continue through the installation application.
e. Once programming has completed, a screen may list additional steps required to complete the
programming process. Make sure all applicable steps are followed in order.

SaleBestseller No. 1

KINGBOLEN Ediag Elite OBD2 Scanner Bluetooth, Bi-Directional Control Scanner All System Diagnostic Tool for iOS & Android, 15+ Hot Reset, CANFD Protocol, FCA AutoAuth, No Subscriptions Lifetime Update

OBD2 Bluetooth Scanner Lifetime Update: Ediag Elite offers revolutionary Advantage Lifetime Updates with unlimited access to the superior 15+ reset service, bi-directional testing and full system diagnostics.The Ediag Elite is an excellent Bluetooth OBD2 scanner diagnostic tool ideal for DIY's and private car owners.
Bi-Directional Control for Quickly Locating Problems: The Bi-Directional Scan tool allows you to send commands directly from your smartphone to your vehicle's ECU for active testing. This feature helps to quickly narrow down problems such as air conditioning clutches, windows, doors, sunroofs, etc., reducing diagnostic time for mechanics and helping DIY users locate faults more easily. In addition, Ediag Elite provides fault analysis and repair guidance to help you solve problems efficiently.
15+ Maintenance Resets: The current version introduces 15+ popular special features: Oil Reset, Headlight Matching, Bleeding Reset, TPMS Reset, BMS Reset, Gear Box Relearn, EGR Learning, Throttle Learning, Injector Coding, SAS Reset and more special functions in system diagnose menu. These functions make it easy for owners to carry out the necessary maintenance and servicing, ensuring that your vehicle stays in top condition, prolonging its service life and preventing common problems and breakdowns. Note: The Special function vary by model& year, Reach us via support@kingbolen.c o m to check compatibility.
Wide Compatibility Can-FD & FCA Autoauth: Compatible with GM, Ford, Toyota, Chrysler, Honda, Mazda, Nissan, Mitsubishi, Hyundai, KIA with standard OBD2 port from 1996 to newer. More car brands and features will be released gradually. Newest Ediag Elite scanner supports CANFD Protocol and FCA cars. Note: Coverage may vary on different vehicle by model& year ,Please contact us via support@kingbolen.c o m to confirm compatibility before purchase.
Perfect for Monitoring The Health of Your Vehicle: Ediag Elite is designed to make vehicle maintenance simple and efficient. With intelligent AutoVIN quick recognition, it is easy to connect to your car without the need for manual input. Real-time data is visualized in a variety of formats, including graphs, numeric, meter displays and clear 4-in-1 data charts, allowing you to effortlessly monitor real-time performance. Data logging/reporting is available for playback and further analysis.

Bestseller No. 2

KINGBOLEN OBD2 Scanner Bluetooth, K7 Wireless Bidirectional Scan Tool with 3Yrs F.Ree Update(Worth 300), ECU Coding, 31+ Resets, All Systems Car Diagnostic Scanner, FCA AutoAuth, Crankshaft Relearn

2025 Newest Top-tier Car Scanner: KINGBOLEN K7 diagnostic scan tool is equipped with most capabilities for daily repair/maintenance: Wireless diagnosis via Bluetooth, Bidirectional Control Test, ECU Online/Offline Coding, Customization, 31+ Restes, PMI for Ford, Lincoln, Mazda, Global version for 100+ brand vehicles and 17 languages, no area limit, FCA AutoAuth, 3-year Fr-ee Software Upgrade. After 3 years, it will continue to work with the last update version, but online functions can't be available
OE-Level Full Systems Scan Tool: K7 professional diagnostic scanner with AUTO VIN can do one-click to scan ECUs on most of vehicles, like PCM, ECM, EPS, BCM, TPMS, SAS, A/C system... to read/clear code, view live data, freeze frame, read ECU info. 4-in-1 data stream graphics can make data viewing more intuitive. Detailed diagnostic reports will help you easily master the car situation as it can be shared by bluetooth or email! Adding workshop information can help your customers to know more
Bi-Directional Control Test/Active Test: Bi-directional scan tool Kingbolen K7 can perform real active test that can send commands to the vehicle's ECU to drive the actuators to work, like window, rear mirrors, sunroof, door, solenoids, wipers, headlamp, etc, helping you quickly find out bad parts and pinpoint faulty issues. K7 bidirectional scanner will be a good choice to sav* money and time on car repairs when performing complex maintenance and repair
Advanced ECU Online/Offline Coding: ECU Coding allows you to refresh hidden functions to optimize vehicle performance, customize vehicles, match the replaced components with ECU. In contrast to similarly priced products that only support Offline Coding, the KINGBOLEN K7 diagnostic tool can do Variant coding for Benz and also supports Online Coding which can send coding values directly from the server, faster and more accurate. (Note: please check compatibility before order.)
31 Reset Functions: Experience tells us that just a small repair service may cost a lot of money. Kingbolen K7 is a professional automative OBDII scanner with 31 common maintenance services like Oil /SAS/EPB/TPMS Reset, Battery Matching, ABS Bleeding, Injector Coding, etc. It effectively handles most of the car reset and relearning jobs, perfect for experienced DIYers and mechanics. NOTE: Functions in the menu vary across vehicles. Kindly check the compatibility before purchase

SaleBestseller No. 3

KINGBOLEN OBD2 Scanner Bluetooth, All System Bidirectional Control Car Diagnostic Tool for Toyota/Lexus, No Subscription Fee, SOLOSCAN Code Reader for iOS & Android, All Reset Service, ECU Coding

【ONLY for Toyota/Lexus Models, No Subscription Fee】As a specialized diagnostic tool for Toyota & Lexus, this 2025 newest KINGBOLEN SOLOSCAN provides In-depth All systems diagnostics, F.ree Full Reset Functions, Powerful Bi-directional Control, ECU Coding, Lifetime F.ree Update, 22 Languages, No IP Limited, etc. Bluetooth technology allows the obd2 scanner to be linked to your cell phone easily, showing what's wrong and how to fix it, so you can understand your car's health anytime, anywhere!
【OE-Level Full System Diagnostics】This bluetooth obd2 scanner provides in-depth diagnostic information for all available modules including TCM/ECM/ABS/BCM/SAS/EPB/Fuel...systems. Soloscan can read ECU info, read/clear codes, view data stream, retrieves freeze-frame, do active functional test and print the diagnostic report you need. Master cars situation with a few simple clicks!
【Powerful Bi-Directional Control/Active Test】Kingbolen Soloscan car diagnostic scanner for Toyota & for Lexus, can send commands to vehicle systems/components to identify potential problems and test their working status. You don't need to tear things apart they can be tested electronically like opening and closing of the sunroof and things of that nature.
【Advanced ECU CODING Function】This bidirectional scan tool supports Component Matching, Customize OE-settings, Flash Hidden Feature, Optimize car performance. You can activate higher-level functions or disable annoying features, like Auto Rear Mirror Folding, Auto Door Lock/Unlock, Daytime Running Light, etc.*NOTE: Coding functions vary by model & year. Not for all models, please check compatibility before purchase.
【All F-ree Maintenance Service】The diagnostic scan tool is equipped with powerful free reset services to perform after repair and maintenance, including Oil reset, EPB reset, SAS calibration, ABS bleeding, injector code, TPMS reset, D.P.F Regen, etc. Enter from the all-system diagnostic menu to unlock more system special functions, and effectively handle the reset and relearn of most cars. Note: The Special function vary by model& year, Reach us via support@kingbolen.c o m to check compatibility.

Bestseller No. 4

KINGBOLEN Ediag Plus Bluetooth Scanner, All System Bidirectional Control OBD2 Diagnostic Scanner for iOS & Android with ECU Coding, CAN-FD Protocol, Auto VIN, 15+ Rest Functions, 1 Year Gratis Update

【KINGBOLEN EDIAG Plus Bi-directional Control Bluetooth Scanner】KINGBOLEN Ediag Plus Bluetooth Scanner （Upgraded version of thinkdaig/ediag）equipped with 15+ resets, ECU coding, Bi-directional test, CAN-FD Protocol, Auto-VIN, full systems diagnosis, one year F-ree update. Bluetooth connection makes your phone becomes a smart diagnostic scanner with wider working range and you can operate the device conveniently.
【Full Systems Diagnostic Tool】As an OE-Level full systems diagnostic tool, KINGBOLEN Ediag plus supports read/clear fault codes, read live data, view 4-in-1 live data of in text & graph, ECU information, read control module information, actuation tests and maintenance functions for ECM, ABS, BCM, SRS, TCM, BMS, TPMS, SAS, A/C system etc..The diagnosis report reveals the fault codes fast, helps you located the related components efficiently.
【15+ Special Service Functions】KINGBOLEN EDIAG plus obd2 scanner diagnostic tool covers almost all commonly used maintenance: Oil Light Reset, Battery Reset, SAS Calibration, Injector Coding, TPMS Reset, ABS Bleeding, Electronic Throttle Learning, Headlight Matching, Sunroof Initialization, Suspension Matching, Transmission Learning and more advanced functions can be found in the car model.
【ECU Coding】The KINGBOLEN EDIAG Plus diagnostic tool is used as an OE Level scanner. ECU Coding allows you to match replaced components with ECU data, hidden flash functions for BMW, for GM, for Benz, etc. Whether you are a private owner or a professional technician, EDIAG Plus is a powerful and handy scanner tool for you. Coverage list may vary by car brand and model. Please check with us before placing an order.
【Bidirectional Test】This EDIAG plus Bluetooth scan tool could send commands to and receive information from ECU of the vehicles to test the solenoids and actuators working status, which finds faults without using the vehicle controls and no need disassembling components, saving a lot of time to identify the root cause. You can use Bidirectional Test to check Window Up and Down/Wiper/Door Test, Rearview Mirror Test, Headlight Test and more.

Bestseller No. 5

KINGBOLEN K10 Elite Bidirectional Scan Tool with Topology Graph, Full Systems OBD2 Diagnostic Scanner with 40+ Resets, ECU Coding,FCA AutoAuth,SGW,ADAS,CAN-FD & DoIP, 2-Yr F-ree Update,Upgraded of K10

【Advanced Diagnostic Device】KINGBOLEN K10 ELITE Car Code Reader is equipped with 10.0-Inch HD Touch Screen, Rear Camera 8.0MP, powerful Android 10.0 OS, 4+128GB Extended Memory, lasting 3.85V/12600mAh（7.7V/6300mAh）Battery and WIFI/Bluetooth Diagnostics. Supports Full System Diagnosis+ 40 Reset Services+ ECU Coding+ Active testing+ Remote Support+ Intelligent Diagnosis+ Modular expansion+ ADAS Calibration+ Topology map+ Guidance Function+ AUTO VIN. Enjoy maintenance and meet your needs easily!
【OE-Level Full Systems OBD2 Scanner】KINGBOLEN K10 ELITE OBD2 scanner supports vehicle All Systems Diagnostic and OBD2 Full Function, it can Read/Clear Fault Codes, Read Live Data/Freeze Frame, Read Control Module Information, Actuation Tests and Reset Functions for TPMS,ECM,BCM,ABS,SRS,TCM,BMS,SAS,A/C system etc.. The wired connection is more stable during use and is not easily interrupted. One-Click to scan all ECU, Applicable to maintenance technicians, repair shops & individual owner
【Intuitive Topology Map Design】K10 Elite Diagnostic Tool introduces the innovation of Module Topology Mapping which illuminates the interplay between diverse vehicle modules and swiftly pinpoints faulty ones in a single glance. This feature slashes guesswork, enhances diagnostic every equipped systems to troubleshoot fault codes. Recommend to choose Smart Scan when use this function.It Support 5 Extended Modules and more, ADAS Calibration, CAN FD/DoIP+ FCA SGW, Diagnostic Report QR code Share
【40+ Services/Calibration/Relearn Functions】K10Elite Wired OBD2 Diagnostic Tool comes with 40+ Functions, Such as Oil, EPB, SAS, Throttle, BMS, TPMS Reset, ABS Bleeding, Injector Coding, Fuel Trim Reset, Cylinder Power Balance, Crankshaft Sensors Relearn, Zero Point Calibration, Fuel Injector Balance, Stop/Start Reset, A/F Reset, Elec.Throttle Relearn etc. It can provides step-by-step maintenance Guide Function for Volkswagen/Audi/Skoda/Seats etc. FR-EE UPDATE for 2 YEARS,Additional Savings
【Efficient Bi-Directional Control & ECU Coding】K10 ELITE can be used to verify diagnosis and pinpoint repairs needed with Powerful Active Tests, Such as Fuel Injector, Coolant Fans, Coolant Pump, Windshield Wipers, EGR Valve, Sunroof, Windows etc. It supports Online/ECU coding for vehicles, which helps to match and code after ECU replacement, personalized car settings including Light, ABS Module etc. It can also unlock hidden functions like movement pointer, horn alerts, disable seat warning etc

This product presentation was made with AAWP plugin.

Last update on 2025-05-08 / Affiliate links / Images from Amazon Product Advertising API