Date: 2017-11-20
NHTSA Action Number: PE17008
Components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM
Subject: Tailpipe seperation resulting in fire
Opened From: 2017-11-20 - 2018-08-21
Summary
During the review of Motor Coach Industries
(MCI) Early Warning Reporting (EWR) 2016 Q4 data, field reports were identified that described fires on 2 buses from different regions of the country.These fires were alleged to have occurred as a result of a loose clamp allowing the tailpipe to separate from the exhaust after treatment assembly.During exhaust after treatment regeneration high temperature gases were directed at the plastic rear bumper.Prior to the fires, there were no indications (such as soot trails) that the clamps were loose.When contacted, the fleet maintenance manager stated all maintenance schedules and DOT inspections had been performed without a failure citation of the exhaust systems. MCI addressed the issue by installing additional brackets to the pipe on all the other buses in the fleet ensuring the tailpipe stayed intact should the clamp lose torque.In correspondence with another fleet using the same style bus, the fleet safety manager described having loose clamps resulting in fires.The MCI fix for the second fleet was to install a shield at the rear bumper to deflect the high temperature exhaust gases in the event of the tailpipe separated from the exhaust after treatment system.This fix was different from the first fleet.During review of communications submitted in March 2017, the Office of Defects Investigation (ODI) identified MCI Service Bulletin No. 309 regarding a maintenance procedure of the exhaust system Torca Accuseal clamp.This bulletin instructed that a new clamp must be utilized after any service or maintenance is performed in which the existing clamp was loosened or removed.ODI requested further information on this bulletin and received warranty claims showing loose tailpipes.MCI has taken the position that fires at the clamp location were due to improper maintenance by the fleets.After analysis of data, provided by MCI to ODI in response to an information request letter, ODI found there was not an increasing number (claim rate of 1.1%) of failures and fires even with portions of the fleet having over seven years in service.The 4 fires identified were from 2 fleets.ODI contacted the fleets with fire incidents and was informed that one of the two buses involved in the fire incidents was sold in 2016 and other fleet does not have maintenance records since they only keep records for one year.ODI is closing the investigation as no actionable trend has been identified.This investigation is closed. Further use of agency resources does not appear to be warranted. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The agency reserves the right to take further action if warranted by the circumstances.
For Documents Related to this Investigation go to NHTSA Website
Click on the (+) Plus Sign
Then Click on Associated Document(s)
More Information on this Investigation on the NHTSA WebsiteSearch NHTSA Database for Recalls
Search NHTSA Database for (TSB's) Technical Service Bulletins
View Latest (TSB's) Technical Service Bulletins
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
- 【WHY CHOOSE THE 2025 CR PRO+? 】CR Pro+ of 2.0GHz quad-core CPU has deeper active test for both complex hardware response and control modules communication, not just simple wipers test. With 49 reset and 38 brand-specific service, it handles current repairs and future maintenance needs. It has multi-systems in-depth diagnostics ability. CR Pro+ has powerful decoding capabilities for multi systems, giving you complete vehicle health analysis - not just isolated systems. Note: Available systems vary by model.
- 【OE Multi-SYSTEMS DIAGNOSTICS】iCarsoft Pro+ digs deeper across much more systems and sub-systems,like Engine, TCM, ABS, Airbag, Brake, BMS, Battery, electronics, windows, etc. It displays module Info, real-time data graphs, such as transmission temperature, saves freeze frames to pinpoint intermittent faults - all with lifetime free updates. This isn't just a code reader—it's a long-term investment in your car's health. TIP:Each car model has unique systems. Please contact us to confirm which systems are compatible with your vehicle.
- 【COST-EFFECTIVE 49 RESET SERVICE】 The iCarsoft Pro+ 2025 features full Reset/ Adaptation/ Calibration/ Initialization/ Relearn/ Match service with Full ECU diagnostic, including ABS Reset/ Oil Reset/ EPB Reset/ ETC Reset/ INJ Reset/ SAS Reset/ BLD Reset/ BMS Reset/ LAP Reset/ SPS Reset/ TPMS Reset/ACS Reset/ AFS Reset/ FPP Reset/ IDL Reset/ BSC Reset/ Door Reset/ Seat Reset/ TCM Reset/ Service Interval Reset/ Brake Reset/ DWR Reset/ ECM Reset etc, and other special functions based on car brands. NOTE:The supported reset functions vary by vehicle models, please contact us to check compatibility.
- 【POWERFUL BI-DIRECTIONAL CONTROLS】iCarsoft Pro+ (2025) enables to test more detailed units than average full-brand scanners, for example, for Porsche 911 stepless electronic fan module- letting you diagnose cooling system issues before they cause overheating damage, continuous oxygen sensing - LSU, and attaching brake pads, and more. Wiith this tool you can efficiently identify the fault source, avoid unit waste due to "blind unit- guessing" repairs. NOTE:The supported actuation test functions vary by vehicle models, please contact us to check compatibility.
- 【Advanced 49 Reset + 38 Brand-Specific Services】 CR Pro+ covers 49+ system resets and has brand - specific reset functions. As mileage grows, more units require maintenance. Our reset tool suit both individual car owners and mechanics. Post - emergency repairs, our tool enables quick resets, restoring vehicle condition and saving dealership reset costs.For repair shops, cut outsourcing, earn more per order, reset in 2 minutes. NOTE:The supported reset functions vary by vehicle models, please contact us to check compatibility.
- Scanner POR V2.0 with all obd2 services
- Do the scanning for engine
- Support OBDII/EOBD Ten Modes of Operation
- 【Designed for Mercedes-Benz, Sprinter and Smart】Integrating all functions of iCarsoft MB series automotive diagnostic tool, accesses car specific subsystem. (As every car model of Benz has its-owned specific car system and ECUs, not all car models have full car ECUs which may cause scanner to be unable to do all reset services listed. So please email to us with car VIN and Services Required to do scanner's services for a compatibility check before purchasing. You can also refer to the eighth image in the main picture for compatibility instructions and available functions for your model.)
- 【35+ Reset Services】MB V3.0 (2025 Version) diagnostic tool performs professional maintenance services - OIL / SAS/ EPB / ETC /D-P-F / TPMS / ABS / Suspension / Air Conditioner / Head Lamp / Body Stability / Engine Contro / Seat / Fuel Pump / Air-Filter / Engine Idle / Door / ImmoKey Reset, Injector Coding, Trans Adpation, Miscellaneous + 14 newest maintenance services - Adblue, Cluth, Electronic Water Pump, NOxSensor Test, Rain/Light Sensor, Start/Stop, Radar/Camera, Cylinder Cutout Test, Remove Speed Limit, Reset Control Unit, Oxygen Sensor, Seat Belt, Crankshaft Learning, Language Setting and more (Tips: Quantity of reset-services is based on the car system ECUs your car model has)
- 【OE-Level All System OBD2 Scanner】iCarsoft MB V3.0 (2025 Version) diagnostic scanner offers comprehensive OBDII services, allowing you to quickly scan all systems, including the Engine, ABS, SAS, SRS, TPMS, TCM, Fuel Pump System, ESP, EPB, EPS, Suspension, SCM, Adaptive Systems, and more. It supports functions such as reading and erasing codes, checking I/M readiness, viewing freeze frame data, performing O2 sensor tests, conducting on-board monitoring, testing the evap system, auto VIN retrieval, and reading both generic and specific codes, as well as DTCs and battery tests.
- 【Bidirectional Scan Tool】iCarsoft MB V3.0 (2025 Version) Bidirectional scanner supports activate or control a vehicle system or component, allows commanding cars’ modules and receiving info from the ECU to perform active tests on individual components, including EVAP/ABS Motor Pump/Windows/Sunroof and more, to pinpoint fault causes & resolve issues,and allows you to re-learn certain components after making repairs or replacement.
- 【Real Time Record & Graph View】iCarsoft MB V3.0 (2025 Version) can automatically record vehicle text history and identify vehicle information. Preserve real-time data information. View & Graph Live Data. Support Data Review and Print. Multi-language: English, German, Dutch, Spanish, French and so on.
- WHY CR MAX IS BEST- The iCarsoft CR MAX stands out by offering more detailed service sub-functions for pinpoint maintenance, ECU coding capabilities for B M.W to match new units, and more comprehensive active tests for complex control units and sensors like the rain sensor, BSC, TCM, ECM, BMS, radar/camera, fuel pump, etc, instead of simple wiper or light test—This allows you to efficiently identify whether the fault lies in the hardware or the ECU itself, no more guesswork and preventing unnecessary hardware replacements.
- NEWEST IN INNOVATION- iCarsoft auto car diagnostic scanner compatible with CAN-FD, CR MAX can do it all-reads and clears trouble codes, ALL SYSTEM DIAGNOSIS such as engine, transmission, ABS and airbag etc. CR MAX code reader for all cars can perform I/M Readiness, Live Data, Freeze Frame, Vehicle Information, Monitor Test, On-Board Monitor, Evap System Test,O2 Sensor Test,DTC Library Lookup,etc.
- 49 RESET +38 SERVICES- It performs: Oil Reset, EPB,SAS,Throttle, D-P-F, Battery, ABS, Injector, TPMS, Suspension, AC, Head Lamp, Body Stablity, Engine, Tramsmission, Airbag, Seat, Door-Win-Roof, Odometer, Fuel Pump, Door, Immobilizer, E-G-R.+21 NEWEST SERVICES( Need update scanner)-AdBlue, Clutch, Crankshaft, High Voltage Battery, Cruise Control, NO xSensor, Rain Sensor, Stop And Start, Turbocharger, Head Up Display, Radar Camera, Vehicle Setup, Cyliner Misfire Check,SpeedLimitAssist, ControlUnitReset,OxygenSensor, Seatbelt. Extra 38+ extra services based on car brand.(Tips: Quantity of reset/ calibration fucitons are based on car system that your vehicle model has)
- REVOLUTIONARY ACTIVE TESTS: No longer simple window, light test. CR Max scanner offers deeper tests for complex car subsystems/units (example for Benz CLK, shift release test, BAS brake assist test, transmission valves test, etc) after vehicle units repair/system update/maintenace, checking car units work or not, digging out unit faults /potential faults for car maintenance. Top choice for millions dealers for vehicle maintenace.(Warm tip: The available testing functions is based on the units your car has)
- DYNAMIC GRAPHING CONVENIENT- 118 diagnostic datas allows you to view 4 in 1 live graph data live data (4 data display formats for selection based on data type: analog instrument, text, drawing, and Progress bar.).7-inch LCD touchscreen 1024 x 600 HD resolution, dynamic waveform for Simple & fast to know accurate data results for all car error codes instead of relying on boring characters; allows report printing.
- 【Enhance Diagnostic 】iCarsoft POR V2.0 code reader is enhanced its ability which is different from other scanner, such as enhancing full system diagnostic function, enhancing in-depth diagnosis ability to all faults and potential faults, more powerful scaning to all components,providing free update&free repair&24 hour tech support. You can experience easier, smoother & faster operation. Also give your cars satisfying routine maintenance to avoid costly repairs. NOTE: The diagnosable systems depend on the ECU you have on your car. Please contact us to check compatibility before purchase.
- 【OBD2 Full Function】iCarsoft POR V2.0 scan tool will allow you to perform full OBDII diagnostic for Porsche/Cayenne with OBDII / EOBD protocols.Effortlessly does obd2 detection: read/erase codes, I/M Readiness,Freeze Frame, O2 Sensor Test, On-Board Monitoring,Evap System Test, Read Vehicle Info, Retrieve generic & manufacturer specific codes, MIL,Read live PCM DataStream,Read DTCs, DTCs search etc. Tips: the fault code can be only erased after the problem is fixed
- 【Most Useful Reset Services】iCarsoft POR V2.0 car diagnostic tool offers essential features like Oil Reset, EPB/ SAS/BMS/BLD(ABS Bleeding Service)/ETC /DP Reset/ Injector Coding etc. Easily reset oil change indicators, recalibrate steering angle sensors,relearn replaced parking brake and so on. For optimal vehicle performance and maintenance convenience.
- 【Full Systems In-depth Diagnosis】It has powerful code-reading ability for Porsche-specific codes, and it is engineered for EU/US models. Specializes in in-depth diagnosis for Porsche models, comprehensively scanning all ECUs from engine, ABS, transmission to AC, windows, etc. Whether it's a complex engine misfire, an ABS system glitch during high - speed braking, a transmission issue causing gear - shifting problems, or an AC unit not cooling properly on a hot day, it delves deep.
- 【Fast Diagnostics, Live Data】Full vehicle information option-vehicle identification number (VIN) / calibration verification number (CVN) / other test information. iCarsoft POR V2.0 can instantly obtain crucial vehicle details for expedited diagnostic processes, and keep data stream recording for later review/ DTC Lookup/ diagnostic data record/ custom report & display live data stream in color graphing
This product presentation was made with AAWP plugin.
Last update on 2025-04-28 / Affiliate links / Images from Amazon Product Advertising API
