Date: 2007-08-08
Toyota
Motor Corporation
NHTSA Action Number: EA07010
Components: VEHICLE SPEED CONTROL:ACCELERATOR PEDAL
Subject: UNWANTED ACCELERATION, FLOOR MAT
Opened From: 2007-08-08 - 2007-10-11
NHTSA Recall Number: 07E082
Summary
THE DRIVER SIDE FLOOR MAT WILL NOT INTERFERE WITH THE THROTTLE PEDAL IF PROPERLY SECURED USING THE RETAINING HOOKS PROVIDED BY TOYOTA.HOWEVER, IF THE ALL WEATHER MAT IS UNSECURED AND MOVES FORWARD FROM ITS INTENDED POSITION IT CAN ENTRAP THE THROTTLE PEDAL AT THE FULLY OPEN POSITION AFTER IT HAS BEEN DEPRESSED.THIS CAN HAPPEN REGARDLESS OF WHETHER OR NOT ANOTHER MAT (CARPET) IS UNDERNEATH.WHEN THIS OCCURS, SOME OPERATORS REACT BY APPLYING THE BRAKE PEDAL MULTIPLE TIMES, DEPLETING THE BRAKING SYSTEM'S (VACUUM BASED) POWER ASSIST.STOPPING THE VEHICLE WITH UNASSISTED BRAKING WHILE THE THROTTLE IS FULLY OPEN REQUIRES SIGNIFICANT PEDAL FORCE, WHICH SOME OPERATORS DID NOT, OR WERE UNABLE TO, APPLY FOR THE REQUIRED DURATION.CONTINUED DRIVING IN THIS CONDITION RESULTS IN OVERHEATED BRAKES, WHICH FURTHER DIMINISHES THE BRAKING EFFECTIVENESS.SOME OPERATORS ATTEMPTED TO TURN THE VEHICLE OFF BY DEPRESSING THE ENGINE CONTROL BUTTON, HOWEVER THEY WERE UNAWARE THE BUTTON HAD TO BE DEPRESSED FOR THREE SECONDS TO STOP THE ENGINE WHEN THE VEHICLE IS IN MOTION; THIS FUNCTIONALITY WAS NOT EXPLAINED ADEQUATELY IN THE OWNER'S MANUAL.IN ODI INTERVIEWS, OWNER'S REPORTED THEY WERE UNAWARE THE ALL WEATHER MAT HAD THE POTENTIAL TO INTERFERE WITH THE THROTTLE PEDAL, ADVISING THAT THIS WAS NEVER PROPERLY EXPLAINED GIVEN THE SIGNIFICANT HAZARD IT REPRESENTED.OWNERS REPORTED SEVERAL EXPLANATIONS FOR WHY THE MAT WAS UNSECURED, INCLUDING THAT THE VEHICLE WAS DELIVERED IN THIS CONDITION (MOST COMMON REASON), OR THAT THEY HAD (UNWITTINGLY) INSTALLED THE MAT THEMSELVES, OR THAT ANOTHER PARTY, SUCH AS A CAR WASH ATTENDANT, HAD DISTURBED THE MAT WITHOUT THE OWNER'S KNOWLEDGE.ONE CONSUMER REPORTED THAT THEIR VEHICLE WAS DELIVERED WITHOUT THE RETAINING DEVICES INSTALLED.IN A SEPTEMBER 26, 2007 LETTER TO NHTSA, TOYOTA INDICATED THAT THEY WOULD CONDUCT A SAFETY RECALL TO REPLACE THE ALL WEATHER MAT WITH A REDESIGNED MAT.ACCORDING TO TOYOTA, THE NEW MAT DESIGN WILL REDUCE THE POTENTIAL FOR MAT INTERFERENCE WITH THE THROTTLE PEDAL.THE POPULATION NOTED ABOVE REPRESENTS THE NUMBER OF SUBJECT MATSTHAT HAVE BEEN SOLD IN THE UNITED STATES.SINCE TOYOTA CANNOT IDENTIFY WHICH VEHICLES MAY HAVE THE SUBJECT MATS, THEY WILL SEND A LETTER TO ALL REGISTERED OWNERS OF THE SUBJECT VEHICLES (ESTIMATED 750K) ADVISING THEM OF THE CONCERN AND REMEDY.A COPY OF THAT LETTER WILL BE POSTED TO NHTSA'S WEB SITE UNDER RECALL 07E-082; IT CONTAINS A DESCRIPTION OF THE CONDITION AND THE ACTIONS AN OPERATOR SHOULD TAKE IN THE EVENT THROTTLE ENTRAPMENT OCCURS WHILE DRIVING.THE FATALITY INCIDENT NOTED ABOVE OCCURRED IN JULY 2007 AND WAS INVESTIGATED BY NHTSA'S SPECIAL CRASH INVESTIGATIONS OFFICE.IT HAS NOT BEEN REPORTED ON A VEHICLE OWNER QUESTIONNAIRE.THE OPERATOR REPORTEDLY TRAVELLED AT SPEEDS IN EXCESS OF 100 MPH FOR AN ESTIMATED EIGHT MILES ON AN INTERSTATE IN CALIFORNIA BEFORE IT STRUCK TWO OTHER VEHICLES.ONE OF THE STRUCK VEHICLES AND THE SUBJECT VEHICLE CAUGHT FIRE.THE OCCUPANT OF THE STRUCK VEHICLE DID NOT EVACULATE AND DIED AT THE SCENE.THE SUBJECT VEHICLE DRIVER SUFFERED A BROKEN BONE.THE CALIFORNIA HIGHWAY PATROL IS INVESTIGATING THE INCIDENT ALSO.ODI DID NOT ISSUE AN INFORMATION REQUEST LETTER DURING THIS INVESTIGATION.THE TOYOTA REPORTS NOTED ABOVE WERE REPORTED DURING PRELIMINARY EVALUATION PE07-016 AND ARE CURRENT THROUGH APRIL 2007 FOR MY 2007 LEXUS ES350 ONLY.ODI DOES NOT HAVE FIELD EXPERIENCE DATA FROM TOYOTA FOR CAMRY VEHICLES.THROTTLE ENTRAPMENT DUE TO IMPROPERLY INSTALLED FLOOR MATS COULD BE A CONCERN IN ALL VEHICLES.THEREFORE, DRIVERS SHOULD ALWAYS ENSURE THEIR FLOOR MATS ARE PROPERLY AND SAFELY INSTALLED.THIS INCL
For Documents Related to this Investigation go to NHTSA Website
Click on the (+) Plus Sign
Then Click on Associated Document(s)
More Information on this Investigation on the NHTSA WebsiteSearch NHTSA Database for Recalls
Search NHTSA Database for (TSB's) Technical Service Bulletins
View Latest (TSB's) Technical Service Bulletins
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
- 【Extensive Compatibility】After the upgrade, the compatibility is wider and more accurate! HD601 heavy duty truck scanner supports all major truck models that comply with standard protocols (SAE J1939, SAE J1708, ISO 14230-4, ISO 15764-4 and ISO 9141-2, ISO 27145-4 and Euro6). Fits for Cummins, Paccar, Detroit, Perkins, Freightliner, International, Peterbilt, Ford, Class 4-Class 8 trucks, etc. It also check engine diagnosis on most cars, minivans and light trucks
- 【 Full System Diagnostic】HD601 Diesel Scanner supports all system scans of heavy trucks compliant with standard protocols SAE J1939 & J1708, such as Engine, ABS, Transmission, Braking System, ESP, EPS, Fuel System, etc, It is a great scan tool fits for Cummins, Caterpillar, Detroit, Perkins, Maxxforce, Bendix,Wabash, Wabaco, Haldex, Allison, Eaton heavy trucks, With this truck tool, you can get deep analysis data about the system and do some repairs by yourself, saving much time and money
- 【Enhanced Diesel OBD Scanner】The HD601 Diesel OBD Scanner offers unparalleled diagnostic capabilities for heavy-duty trucks. Beyond code reading, clearing, and live data display, it retrieves vehicle information, freeze frames, and DTCs. With 6, 9, and 16 pin cables, it ensures compatibility with various engines. This scanner's real-world testing prowess ensures comprehensive support for a wide array of heavy-duty truck engines, making it an indispensable tool for truck diagnostics
- 【DTC Library】+【Life Time Free Update】The built-in DTC library allows you to retrieve the codes directly without searching for the definition in the book. Whether you are a professional mechanic or a DIY car owner, HD601 diesel scanner explains the existing problem, makes it easier for you to understand the codes definition and fix the problem faster. Plus, you get a lifetime free internet updates, so you always have the latest software for diagnostics in English and Spanish languages
- 【Friendly Design, Easy of Use】This scanner is plug and play, simple and convenient, and very friendly for beginners. With improved buttons for easy menu navigation. The excellent 2.8 inch LCD color screen makes it easy to view the displayed results and gives you a better overview of your car's problem areas and the identified codes. In addition, the processor is super-fast and responds without lagging, providing maximum comfort and efficiency in diagnostic and service work.
- 【Diesel Engines】HD500 heavy duty truck scanner is tailored to vehicles equipped with cummins, cat, detroit, paccar, international, hino and more engines. This diesel scan tool come with diverse adapters, including diesel 6 & 9 pin, CAT-9 pin, CAT-14 pin, 16 pin cable. It is engineered to deliver accurate and reliable diagnostics, ensuring compatibility and effective troubleshooting for your trucks. Tip: If your truck fault code is factory custom protocol, please enter the diagnostic menu, and then select the corresponding engine to test, so that your test data will be more accurate.(Please note that the HD500 does not have bidirectional and VGT calibration.)
- 【Advanced DPF Management】The longer a truck is in use, the more particles accumulate in the D.P.F and the more the D.P.F becomes clogged, affecting engine performance and emissions efficiency. This HD500 diesel scanner provides you with DPF regeneration, D.P.F reset, DPD, DPR status control and more functions to achieve efficient cleaning, optimise engine performance and prolong D.P.F life. Save maintenance costs by avoiding D.P.F replacement through regular D.P.F cleaning and D.P.F regeneration. All made easy with the HD500. Warm tips: the HD500 can't do dpf function on Isuzu.
- 【Cylinder Cut-off Services】The cylinder cut-off test can diagnose engine failure problems. The HD500 heavy duty truck scan tool sends a command to the ECU to cut off the injector of a cylinder to check if the injector of that cylinder is not working properly. If the engine speed drops more, the better the cylinder works; if the speed drop is not obvious or does not drop then the cylinder may be faulty; touch the high-pressure pipe between the common rail tube to the injector with your hand, the stronger the pulsation, the better the injection effect. This diesel scan tool provides clear guidance for maintenance.
- 【Speed Limit Reset & ABS】Limit setting enables you can check and set the engine speed and the vehicle road speed limit when the vehicle is stationary, which ensures driving safety. And this scanner for truck also can make you achieve a firm brake pedal by removing air from the ABS module. HD500 truck scanner helps you maintain commercial vehicle breakdowns at all times, saving you money efficiently and winning more business for you! Please note that the adjust the speed limit is supported by fewer vehicles (eg: the cummins engine cannot support speed limit adjust), please confirm the vehicke VIN with us before purchase.
- 【Access All Major Systems with Ease】The HD500 heavy duty scanner truck diesel provides full diagnostic capabilities, covering the engine, ABS, SRS, EPB, Park Brake Controller, DPF, etc. Comes with full HD OBD/EOBD/ OBD2 service modes, including read codes, erase codes, live data, etc. Allows you to quickly identify issues and perform necessary solutions.
- WHY NEXAS NL102+ Diagnostic Tool: Compared with many other heavy duty truck scanner, NL102+ diagnostic tool has more comprehensive diagnostic capabilities, supporting all system diagnostics for all major trucks that comply with standard protocols and full OBD2 functionality. In addition to read/clear codes, displaying live data, it also supports retrieving vehicle information, freezing frames, and DTC lookup. NL102+ OBD2 scanner comes with 6-pin, 9-pin, 16-pin connectors are available to ensure compatibility with a wide range of trucks. You'll get f-ree updates for life, so you always have the latest diagnostic software in English, Spanish and French
- Wide Compatibility: The NEXAS NL102+ heavy duty truck diagnostic scanner is compatible with all heavy-duty trucks that adhere to standard protocols (J1587, J1939, J1708). It covers a wide range of vehicle models, including Cummins, Detroit, Caterpillar, Freightliner, International, Kenworth, John Deere, Peterbilt, Sterling, Mack, Paccar, Western Star, Mercedes-Benz, Volvo, Scania, MAN, Renault, ERF, Foden, Seddon-Atkinson, Iveco, DAF, SISU, STEYR, and ISUZU. Additionally, it supports 10 modes of OBD testing for complete diagnostics and battery voltage monitoring on passenger cars and light vehicles (from Europe, America, and Asia) manufactured after 1996
- Save Up to Hundreds Money for All Heavy Duty Trucks: NEXAS NL102+ diesel scan tool supports accurate full system scanning for all heavy-duty trucks that comply with standard protocols (J1587, J1939, and J1708). This includes vehicle systems such as the engine, transmission, instrument panel, drivetrain, brake system, suspension, ABS, ESP, EPS, fuel system, etc. The diagnostic scan tool communicates with the vehicle's computer to retrieve data stream information, allowing it to accurately pinpoint issues. This reduces the waste caused by blind part replacements, saving your time and hundreds or thousands of money
- All OBD2 Function & Battery Health Monitoring: Compared with other products on the market that only support partial OBD2 functions, this OBD2 scanner supports all OBD2 functions: read/clear codes, live data, freeze frame data, I/M readiness, EVAP test, on-board monitor, O2 sensor test, vehicle information, and DTC lookup, this providing more analysis basis for professional technicians. By regularly detecting the status of the vehicle battery with NL102+ OBD scan tool, it helps to take measures before the battery completely fails to avoid the situation that the vehicle suddenly fails to start. It can accurately diagnose the battery's condition thus saving on repair costs
- Plug and Play & One-click for DTC: NEXAS NL102+ diesel scanner is user-friendly. It comes with an intuitive screen and easy-to-understand interface, making it accessible even for non-professionals to get started. And the built-in DTC library in the code reader allows you to directly retrieve codes without searching for definitions in books, making it easier to understand the code definitions and solve problems more quickly
- 【2025 NEWEST LAUNCH 1st Advanced Scan Tool Compatible With 12V&24V Vehicles】Design for Passenger&Commercial Vehicles 2 in1,work for Cars/Trucks/buses/trailers/excavators/diesel engine/pick-up/etc.
- 【J2534 Reprogramming with Smartlink C】Advanced OEM J2534 reprogramming,Helps access direct data online, replace existing software/firmware in ECU,program new ECUs and fix software-controlled issue.
- 【Over 60 Service Reset Functions + Bi-Directional + ECU Coding 】This scan tool can support ECU Coding,60+ reset service functions like SAS/EPB/TPMS/DPF/Oil/Brake/ABS Bleed, Injector coding, etc.
- 【2025 BEST Advanced Hardware & All Systems Diagnosis+Topology Display 】Support All systems Diagnostic including ENG, AT, ECM, TCM, ABS, SRS, BCM, BMS, TPMS, SAS, Fuel System, Light System and more.
- 【Wider Vehicle Coverage of 12V & 24V Vehicles + 25 Languages】LAUNCH X431 PRO3S+SMARTLINK HD automotive scanner is ALL-IN-ONE Scan Tool for 12V cars and 24V Heavy-duty trucks support CANFD & DOIP.
- 🔥🔥🔥2025 New Functions Making X7 HD the Top Dog - Big Surprise!!! ANCEL X7 HD truck scanner 10 major functional advantages .✅>Full HDOBD/OBD2 Function ✅>ALL System Diagnostic ✅>42+ Reset Function ✅>Active Test / Bi-Directional Control✅>ECU Coding✅>Graphing Live Data✅>Wide Compatibility ✅>2 Yrs Free Update✅>Remote Operation✅>Bluetooth 5.0 & Wifi In addition, 8 major hardware advantages: ✅>6000 mAh✅>10.1 inch Tablet✅>2G RAM✅>32G ROM (Expandable to 128GB)✅>Data Record & Replay & Print✅>Android 10.0✅>Bluetooth 5.0 & Wifi✅>14 Languages
- 🚛OEM DPF Forced Regen & Cylinder Cutout Test & more - ANCEL X7 HD diesel scanner diagnostic tool not only supports DPF regeneration, DPF reset, DPF related information reset, DPR state reset, DPD forced regeneration etc, which helps you better solve the exhaust aftertreatment system problems, but also supports activate motor to do exhaust air in ABS Automatically. Moreover, it features TPMS activation, cylinder cut-off and learning functions.
- 🚛Advanced ECU Coding & Programming - ANCEL X7 HD 10.1inch truck scanner diagnostic tool is equipped with advanced ECU coding, supports Level calibration, Idle speed learning and Adjustment, Camshaft timing control learning, Control unit adaptations, Injector Codes, Read/Write VIN, Road speed limit optional vehicle speed set, etc... PLEASE NOTE that ECU codes are not compatible with all vehicles, please send us your VIN# to check vehicle compatibility.
- 🚛42+ Reset Functions & Bidirectional Control - 2025 newest top heavy duty truck scan tool, comes with 42+ special services (ECU, Speed Limit and Idle Reset, Oil Reset, Injector Coding, EPB, ABS, SRS, Suspension, Throttle, etc. and always keep growing), which meet all your various needs for service and maintenance. Please send your VIN# to our 💌 amazon@anceltech.com 💌 to check compatibility.
- 🚛10 Inch All Systems Diesel Scanner & Full HDOBD/OBD2 Modes - ANCEL X7 HD diesel truck scan tool supports all systems scan, such as Engine, Brake, Retarder, TECU Transmission, Tachograph, ABS, SRS, TPMS, EPB, SAS, ESP, and other vehicle systems, comes with 10 obd2 service modes: read/erase error codes, Data Stream, I/M Readiness, Vehicle Information, Actuations, DTC Lookup, EVAP, view freeze frame, etc.
This product presentation was made with AAWP plugin.
Last update on 2025-04-28 / Affiliate links / Images from Amazon Product Advertising API
