After a preliminary review of consumer complaints and other information related to alleged defects, NHTSA obtains information from the manufacturer(including data on complaints, crashes, injuries, warranty claims, modifications, and part sales) and determines whether further analysis is warranted. If warranted, the investigator will conduct a more detailed and complete analysis of the character and scope of the alleged defect.
NHTSA Action Number: PE24013
Date Opened: 2024-05-08
Date Closed: 2025-01-16
Manufacturer’s Name: Fisker
Group Inc
Component Description: FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING
Summary Description: Inadvertent Automatic Emergency Braking
Summary
On May 8, 2024, the On??ce of Defects Investigation (ODI) opened PE24013 to investigate reports of inadvertent activation of the automatic emergency braking (AEB) system in model year (MY) 2023 Fisker Ocean vehicles manufactured by Fisker Group Inc. (Fisker). The complaints allege the activation of AEB without an apparent roadway obstruction in the vehicle's forward path, resulting in sudden vehicle deceleration. This sudden deceleration occurs without adequate warning or input from the driver. The braking applications range from momentary, partial application resulting in rapid loss of speed to full application, which brings the vehicle to a complete stop in the travel lane. ODI sent Fisker an Information Request (IR) letter on May 20, 2024. On June 17 and 19, 2024, Fisker and its affiliates filed a voluntary petition for relief under chapter 11 of the Bankruptcy Code. Fisker provided an incomplete response to the IR on July 1, 2024. Limited information pertaining to system validation and failure data was provided. Fisker subsequently requested more time to provide additional responsive files due to limited available resources. Fisker sent additional responsive files on September 9, 2024, September 17, 2024, and December 16, 2024, but Fisker's response did not contain sufficient information for ODI to fully evaluate the alleged safety defect. Further, on December 27, 2024, the Fisker employees with whom ODI had been corresponding informed ODI that all Fisker employees were being "dismissed" as of that date. ODI therefore does not anticipate receiving any further responsive submissions such that it can fully evaluate the reports that led to this investigation. ODI performed phone interviews and sent a survey to consumers to obtain more information and validate the allegations. Additionally, ODI reviewed allegations of the alleged safety defect that were submitted to various online forums. Most of these reports were similar in nature to the reports received by ODI. Some of the reports in online forums appear to be duplicative reports that were also submitted to ODI. Based on the responses received and analysis of similar online reporting, there was no clear trend in the following factors pertaining to the allegations: reoccurrence of events (i.e., single or multiple incidents), speed immediately prior to the event, whether the event concluded in a reduction of speed or a full stop, roadway conditions, and warning immediately prior to the event. To date, between the reports provided by Fisker and complaints made directly to the agency, ODI is aware of over 20 reports alleging inadvertent AEB activation. Before the employees were dismissed, Fisker's testing done in response to the inadvertent AEB allegations reportedly did not result in any inadvertent AEB activations. The "Manufacturer" and "Total" counts in the above table have been left blank because of a pending request for confidential treatment by Fisker that could not be timely addressed given the company's status. This information factored into ODI's investigation and analysis. The available information does not warrant further action at this time. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. Additionally, the Agency notes that the Vehicle Safety Act states: "A manufacturer's filing of a petition in bankruptcy under chapter 7 or chapter 11 of title 11 does not negate the manufacturer's duty to comply with section 30112 or sections 30115 through 30120 of this title," which include the recall provisions of the Act. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
NHTSA Action Number: PE24012
Date Opened: 2024-04-25
Date Closed: 2025-01-17
Manufacturer’s Name: Ford Motor Company
Component Description: ELECTRICAL SYSTEM:ADAS
Summary Description: Collisions Involving Ford BlueCruise
Summary
On April 25, 2024, NHTSA's Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE24012) to assess BlueCruise, a partial driving automation system available on certain vehicles manufactured by Ford Motor Company (Ford). NHTSA opened the investigation after the agency received notice of two fatal collisions involving BlueCruise-equipped Ford Mustang Mach-E vehicles. Based on the incidents, NHTSA scoped the investigation to 2021-2024 Mustang Mach-E vehicles equipped with BlueCruise. In June 2024, ODI sent an Information Request (IR) letter to Ford requiring that it provide certain information pertaining to crashes, non-crash reports, and technical specifications that relate to BlueCruise, as well as other Ford partial driving automation systems that offer lane and speed maintenance. In its response to ODI's IR, Ford stated that there are 2,539,962 Ford and Lincoln vehicles (including subject and peer vehicles) equipped with a partial driving automation system within the scope of the request. The majority of these vehicles are equipped with a system that Ford calls Lane Centering Assist (LCA), which is a hands-on partial driving automation system that combines longitudinal control authority governed by Adaptive Cruise Control (ACC) and lateral control authority governed by a steerable path. LCA is offered on a wide range of Ford and Lincoln models beginning in model year 2019. Vehicles that are equipped with BlueCruise, the focus of this investigation, have LCA capability and additionally offer hands-free partial driving automation when certain conditions are met. Hands-free BlueCruise operation is only offered on certain roadways and system availability is geofenced using vehicle GPS. BlueCruise-equipped vehicles employ a camera-based driver monitoring system to determine driver attentiveness to the roadway. BlueCruise was introduced in model year 2021 and is currently available in a select range of Ford and Lincoln vehicles. For BlueCruise- and LCA-equipped vehicles, both ACC and Pre-Collision Assist (PCA) features use a combination of camera and radar sensing technologies to detect and classify objects. ACC is specifically designed to detect vehicles (including cars, trucks, and motorcycles) and bicycles in front of the subject vehicle which are either stationary or moving in the same direction as the subject vehicle. Through this investigation, limitations in the detection of stationary vehicles in certain conditions have been identified. Specifically, due to the potential for false detection of stationary objects at long distances, Ford designed ACC to inhibit any response to reported stationary objects when the subject vehicle's approach speed is at or above 62 mph. Additionally, system performance may be limited when there is poor visibility due to insufficient illumination. In addition to reviewing Ford's response to ODI's IR, the agency conducted a review of crash and non-crash reports identified collectively through Ford's IR response, incident reporting through Standing General Order 2021-01 (SGO), and NHTSA vehicle owner questionnaires. In total, 32 crashes and 2,004 non-crash reports on subject and peer Ford vehicles were identified across manufacturer and ODI data sources. A detailed analysis of each crash was conducted including the review of any available police reports, photographs, data recovered from in-vehicle event data recorders, connected vehicle data, and/or other information. In both fatal collisions referenced in the PE24012 opening resume, the subject Ford Mustang Mach-E vehicle was traveling over 70 mph on a controlled-access highway during nighttime lighting conditions with hands-free BlueCruise engaged when it collided with a stationary vehicle. Analysis of data imaged from the vehicles' event data recorders demonstrates that in each incident, the driver did not apply the brakes or take evasive steering action, and no deceleration was initiated by either the BlueCruise system or PCA prior to impact. Through the agency's crash analysis, four additional frontal collisions were identified where the subject Ford impacted a stopped or slow-moving lead vehicle or another stationary object located in the travel lane. Two of these four incidents involved BlueCruise-equipped Ford Mustang Mach-E vehicles (included in the failure report summary along with the fatal collisions discussed above), while the other two involved other Ford models equipped with the LCA system. Additionally, a trend was identified through analysis of the non-crash reports relating to allegations that ACC (the longitudinal component of both BlueCruise and LCA) failed to detect and/or respond to a stopped or slow-moving lead vehicle. In these reports, consumers often describe that the absence of deceleration initiated by ACC was unexpected and required harsh manual braking or intervention from the PCA to avoid a frontal collision with the lead vehicle. Based on NHTSA's analysis, system limitations relating to the detection of stationary vehicles while traveling at highway speeds and in nighttime lighting conditions appear to be factors in collisions under investigation and several apparently similar near-miss, non-crash reports. This Preliminary Evaluation is being upgraded to an Engineering Analysis (EA25001) to further investigate these system limitations and to evaluate drivers' ability to respond to scenarios that exceed system limitations. During the EA, the agency expects to, among other things, perform vehicle evaluations, review additional technical information, and perform additional analysis of related crashes and non-crash reports. The crashes included in the failure report summary can be found at NHTSA.gov under the following SGO report identification numbers: 502-7268, 502-7426, 502-6852, 502-8738.
NHTSA Action Number: RQ24009
Date Opened: 2024-04-25
Date Closed: 0000-00-00
Manufacturer’s Name: Tesla, Inc.
Component Description: ELECTRICAL SYSTEM:ADAS:DRIVER MONITORING:SOFTWARE
Summary Description: Recall 23V838 Remedy Effectiveness
Summary
The Office of Defects Investigation (ODI) is opening a Recall Query to assess the remedy adequacy of Recall 23V838. On December 12, 2023, Tesla filed a Defect Information Report (Recall 23V838) applicable to all Tesla models produced and equipped with any version of its Autopilot system, which Tesla described as an SAE Level 2 (L2) Advanced Driver Assistance System (ADAS). Autopilot is the simultaneous engagement of Tesla's Traffic-Aware Cruise Control (TACC) and Autosteer. In describing the safety defect, Tesla's Defect Information Report (DIR) explained that "the prominence and scope of the system's controls may be insufficient to prevent driver misuse," and Tesla committed to the deployment of a multipart remedy aimed at improving system and engagement controls and reducing mode confusion. EA22002 (upgraded from PE21020) was opened to investigate whether Tesla's Autopilot contained a defect that created an unreasonable risk to motor vehicle safety and involved extensive crash analysis, human factors analysis, vehicle evaluations, and assessment of vehicle control authority and driver engagement technologies. The work conducted in these investigations aligns with Tesla's conclusion in its 23V838 recall filing. During EA22002, ODI identified at least 13 crashes involving one or more fatalities and many more involving serious injuries in which foreseeable driver misuse of the system played an apparent role. Tesla filed Recall 23V838 to address concerns regarding the Autopilot system investigated in EA22002. Following deployment of the remedy in Recall 23V838, ODI identified concerns due to post-remedy crash events and results from preliminary NHTSA tests of remedied vehicles. Also, Tesla has stated that a portion of the remedy both requires the owner to opt in and allows a driver to readily reverse it. Tesla has also deployed non-remedy updates to address issues that appear related to ODI's concerns under EA22002. This investigation will consider why these updates were not a part of the recall or otherwise determined to remedy a defect that poses an unreasonable safety risk. ODI is therefore opening this Recall Query investigation to further evaluate the adequacy of the remedy for recall 23V838.
NHTSA Action Number: DP24003
Date Opened: 2024-04-22
Date Closed: 2024-10-02
Manufacturer’s Name: Nuna Baby Essentials, Inc.
Component Description: CHILD SEAT:HARNESS:FRONT ADJUSTER BUTTON/RELEASE MECHANISM
Summary Description: Seat harness can loosen without using harness release button on Nuna Rava car seats.
Summary
On March 21, 2024, the Office of Defects Investigation (ODI) was sent a defect petition (DP) that requested the National Highway Traffic Safety Administration investigate the NUNA RAVA car seats for a harness that can allegedly loosen without pressing on the harness release button. The Petitioner stated there were 24 complaints in the NHTSA database all detailing the same issue. According to the Petitioner, "this condition has poor detectability (there are no warning lights) and the consequence of failure in case of a crash would be severe or fatal injury".ODI conducted a thorough search of its database and found 32 consumer complaints that were potentially related to the alleged defect. Following the receipt of a second DP mailed on April 1st, ODI sent an Information Request (IR) letter to the manufacturer Nunababy Essentials. The IR letter requested information on NUNA RAVA child seats regarding allegations of a harness loosening without the harness release button being pressed. After reviewing ODI's internal data and Nuna's response to the IR letter, ODI decided to grant the petitions and open Preliminary Evaluation PE24-026. This Defect Petition will now be closed due to the opening of the PE. The petitions can be reviewed at NHTSA.gov using the following ODI Report reference numbers: 11583786, 11585272.To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
NHTSA Action Number: EA24002
Date Opened: 2024-04-15
Date Closed: 0000-00-00
Manufacturer’s Name: Honda (American Honda Motor Co.)
Component Description: FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING
Summary Description: Inadvertent Automatic Emergency Braking
Summary
On February 21, 2022, the Office of Defects Investigation (ODI) opened Preliminary Evaluation (PE22003) to assess reports of inadvertent activation of the Collision Mitigation Braking System (CMBS), an automatic emergency braking (AEB) system, in model year 2017-2019 Honda CR-V and 2018-2019 Honda Accord vehicles. The reports allege that activation of the AEB system occurs while driving with no apparent obstruction in the vehicle's forward path, resulting in sudden vehicle deceleration. Honda indicated that they were aware of a total of X,XXX reports that may relate to the alleged defect. Honda provided analysis of the alleged defect and alleges that some customers possibly had an inadequate understanding of the CMBS and its limitations. However, many consumer complaints allege that Honda dealerships were unable to reproduce the condition or state that they were informed that this is considered normal CMBS operation. To date, ODI has received a total of 1,294 consumer complaints of inadvertent activation of CMBS in 2017-2022 Honda CR-V and 2018-2022 Honda Accord vehicles. A total of 31 complaints alleged a crash and 50 alleged an injury. The Total column in the Failure Report Summary removes duplicate reports and shows the total number of reports with unique VINs from all Manufacturer, ODI, and EWR data sources. In some cases, there were multiple reports associated with a particular vehicle in which recurring failures were alleged. In total, there were X,XXX reports, 93 injury incidents and 47 crashes involving vehicles with unique VINs that may relate to the alleged defect. PE22-003 has been upgraded to an Engineering Analysis to further assess the scope, frequency, and potential safety related consequences of the inadvertent AEB activations. The scope has been expanded to include assessment of model year 2020-2022 Honda CR-V and Accord vehicles. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.
← Previous 1 … 6 7 8 9 10 … 1,059 Next →
Search NHTSA Database for Recalls
Search NHTSA Database for (TSB’s) Technical Service Bulletins
Technical Service Bulletins TSB’s List
Search NHTSA Database for Vehicle Complaints
- OBD2 Bluetooth Scanner Lifetime Update: Ediag Elite offers revolutionary Advantage Lifetime Updates with unlimited access to the superior 15+ reset service, bi-directional testing and full system diagnostics.The Ediag Elite is an excellent Bluetooth OBD2 scanner diagnostic tool ideal for DIY's and private car owners.
- Bi-Directional Control for Quickly Locating Problems: The Bi-Directional Scan tool allows you to send commands directly from your smartphone to your vehicle's ECU for active testing. This feature helps to quickly narrow down problems such as air conditioning clutches, windows, doors, sunroofs, etc., reducing diagnostic time for mechanics and helping DIY users locate faults more easily. In addition, Ediag Elite provides fault analysis and repair guidance to help you solve problems efficiently.
- 15+ Maintenance Resets: The current version introduces 15+ popular special features: Oil Reset, Headlight Matching, Bleeding Reset, TPMS Reset, BMS Reset, Gear Box Relearn, EGR Learning, Throttle Learning, Injector Coding, SAS Reset and more special functions in system diagnose menu. These functions make it easy for owners to carry out the necessary maintenance and servicing, ensuring that your vehicle stays in top condition, prolonging its service life and preventing common problems and breakdowns. Note: The Special function vary by model& year, Reach us via support@kingbolen.c o m to check compatibility.
- Wide Compatibility Can-FD & FCA Autoauth: Compatible with GM, Ford, Toyota, Chrysler, Honda, Mazda, Nissan, Mitsubishi, Hyundai, KIA with standard OBD2 port from 1996 to newer. More car brands and features will be released gradually. Newest Ediag Elite scanner supports CANFD Protocol and FCA cars. Note: Coverage may vary on different vehicle by model& year ,Please contact us via support@kingbolen.c o m to confirm compatibility before purchase.
- Perfect for Monitoring The Health of Your Vehicle: Ediag Elite is designed to make vehicle maintenance simple and efficient. With intelligent AutoVIN quick recognition, it is easy to connect to your car without the need for manual input. Real-time data is visualized in a variety of formats, including graphs, numeric, meter displays and clear 4-in-1 data charts, allowing you to effortlessly monitor real-time performance. Data logging/reporting is available for playback and further analysis.
- 2025 Newest Top-tier Car Scanner: KINGBOLEN K7 diagnostic scan tool is equipped with most capabilities for daily repair/maintenance: Wireless diagnosis via Bluetooth, Bidirectional Control Test, ECU Online/Offline Coding, Customization, 31+ Restes, PMI for Ford, Lincoln, Mazda, Global version for 100+ brand vehicles and 17 languages, no area limit, FCA AutoAuth, 3-year Fr-ee Software Upgrade. After 3 years, it will continue to work with the last update version, but online functions can't be available
- OE-Level Full Systems Scan Tool: K7 professional diagnostic scanner with AUTO VIN can do one-click to scan ECUs on most of vehicles, like PCM, ECM, EPS, BCM, TPMS, SAS, A/C system... to read/clear code, view live data, freeze frame, read ECU info. 4-in-1 data stream graphics can make data viewing more intuitive. Detailed diagnostic reports will help you easily master the car situation as it can be shared by bluetooth or email! Adding workshop information can help your customers to know more
- Bi-Directional Control Test/Active Test: Bi-directional scan tool Kingbolen K7 can perform real active test that can send commands to the vehicle's ECU to drive the actuators to work, like window, rear mirrors, sunroof, door, solenoids, wipers, headlamp, etc, helping you quickly find out bad parts and pinpoint faulty issues. K7 bidirectional scanner will be a good choice to sav* money and time on car repairs when performing complex maintenance and repair
- Advanced ECU Online/Offline Coding: ECU Coding allows you to refresh hidden functions to optimize vehicle performance, customize vehicles, match the replaced components with ECU. In contrast to similarly priced products that only support Offline Coding, the KINGBOLEN K7 diagnostic tool can do Variant coding for Benz and also supports Online Coding which can send coding values directly from the server, faster and more accurate. (Note: please check compatibility before order.)
- 31 Reset Functions: Experience tells us that just a small repair service may cost a lot of money. Kingbolen K7 is a professional automative OBDII scanner with 31 common maintenance services like Oil /SAS/EPB/TPMS Reset, Battery Matching, ABS Bleeding, Injector Coding, etc. It effectively handles most of the car reset and relearning jobs, perfect for experienced DIYers and mechanics. NOTE: Functions in the menu vary across vehicles. Kindly check the compatibility before purchase
- 【Lifetime Free, All-In-One Car Scanner for Toyota Lexus Models】As a specialized diagnostic tool for Toyota & Lexus, this 2025 newest KINGBOLEN SOLOSCAN provides In-depth All systems diagnostics, F.ree Full Reset Functions, Powerful Bi-directional Control, ECU Coding, Lifetime F.ree Update, 22 Languages, No IP Limited, etc. Bluetooth technology allows the obd2 scanner to be linked to your cell phone easily, showing what's wrong and how to fix it, so you can understand your car's health anytime, anywhere!
- 【OE-Level Full System Diagnostics】This bluetooth obd2 scanner provides in-depth diagnostic information for all available modules including TCM/ECM/ABS/BCM/SAS/EPB/Fuel...systems. Soloscan can read ECU info, read/clear codes, view data stream, retrieves freeze-frame, do active functional test and print the diagnostic report you need. Master cars situation with a few simple clicks!
- 【Powerful Bi-Directional Control/Active Test】Kingbolen Soloscan car diagnostic scanner for Toyota & for Lexus, can send commands to vehicle systems/components to identify potential problems and test their working status. You don't need to tear things apart they can be tested electronically like opening and closing of the sunroof and things of that nature.
- 【Advanced ECU CODING Function】This bidirectional scan tool supports Component Matching, Customize OE-settings, Flash Hidden Feature, Optimize car performance. You can activate higher-level functions or disable annoying features, like Auto Rear Mirror Folding, Auto Door Lock/Unlock, Daytime Running Light, etc.*NOTE: Coding functions vary by model & year. Not for all models, please check compatibility before purchase.
- 【All F-ree Maintenance Service】The diagnostic scan tool is equipped with powerful free reset services to perform after repair and maintenance, including Oil reset, EPB reset, SAS calibration, ABS bleeding, injector code, TPMS reset, D.P.F Regen, etc. Enter from the all-system diagnostic menu to unlock more system special functions, and effectively handle the reset and relearn of most cars. Note: The Special function vary by model& year, Reach us via support@kingbolen.c o m to check compatibility.
- 【KINGBOLEN EDIAG Plus Bi-directional Control Bluetooth Scanner】KINGBOLEN Ediag Plus Bluetooth Scanner （Upgraded version of thinkdaig/ediag）equipped with 15+ resets, ECU coding, Bi-directional test, CAN-FD Protocol, Auto-VIN, full systems diagnosis, one year F-ree update. Bluetooth connection makes your phone becomes a smart diagnostic scanner with wider working range and you can operate the device conveniently.
- 【Full Systems Diagnostic Tool】As an OE-Level full systems diagnostic tool, KINGBOLEN Ediag plus supports read/clear fault codes, read live data, view 4-in-1 live data of in text & graph, ECU information, read control module information, actuation tests and maintenance functions for ECM, ABS, BCM, SRS, TCM, BMS, TPMS, SAS, A/C system etc..The diagnosis report reveals the fault codes fast, helps you located the related components efficiently.
- 【15+ Special Service Functions】KINGBOLEN EDIAG plus obd2 scanner diagnostic tool covers almost all commonly used maintenance: Oil Light Reset, Battery Reset, SAS Calibration, Injector Coding, TPMS Reset, ABS Bleeding, Electronic Throttle Learning, Headlight Matching, Sunroof Initialization, Suspension Matching, Transmission Learning and more advanced functions can be found in the car model.
- 【ECU Coding】The KINGBOLEN EDIAG Plus diagnostic tool is used as an OE Level scanner. ECU Coding allows you to match replaced components with ECU data, hidden flash functions for BMW, for GM, for Benz, etc. Whether you are a private owner or a professional technician, EDIAG Plus is a powerful and handy scanner tool for you. Coverage list may vary by car brand and model. Please check with us before placing an order.
- 【Bidirectional Test】This EDIAG plus Bluetooth scan tool could send commands to and receive information from ECU of the vehicles to test the solenoids and actuators working status, which finds faults without using the vehicle controls and no need disassembling components, saving a lot of time to identify the root cause. You can use Bidirectional Test to check Window Up and Down/Wiper/Door Test, Rearview Mirror Test, Headlight Test and more.
- 【Advanced Diagnostic Device】KINGBOLEN K10 ELITE Car Code Reader is equipped with 10.0-Inch HD Touch Screen, Rear Camera 8.0MP, powerful Android 10.0 OS, 4+128GB Extended Memory, lasting 3.85V/12600mAh（7.7V/6300mAh）Battery and WIFI/Bluetooth Diagnostics. Supports Full System Diagnosis+ 40 Reset Services+ ECU Coding+ Active testing+ Remote Support+ Intelligent Diagnosis+ Modular expansion+ ADAS Calibration+ Topology map+ Guidance Function+ AUTO VIN. Enjoy maintenance and meet your needs easily!
- 【OE-Level Full Systems OBD2 Scanner】KINGBOLEN K10 ELITE OBD2 scanner supports vehicle All Systems Diagnostic and OBD2 Full Function, it can Read/Clear Fault Codes, Read Live Data/Freeze Frame, Read Control Module Information, Actuation Tests and Reset Functions for TPMS,ECM,BCM,ABS,SRS,TCM,BMS,SAS,A/C system etc.. The wired connection is more stable during use and is not easily interrupted. One-Click to scan all ECU, Applicable to maintenance technicians, repair shops & individual owner
- 【Intuitive Topology Map Design】K10 Elite Diagnostic Tool introduces the innovation of Module Topology Mapping which illuminates the interplay between diverse vehicle modules and swiftly pinpoints faulty ones in a single glance. This feature slashes guesswork, enhances diagnostic every equipped systems to troubleshoot fault codes. Recommend to choose Smart Scan when use this function.It Support 5 Extended Modules and more, ADAS Calibration, CAN FD/DoIP+ FCA SGW, Diagnostic Report QR code Share
- 【40+ Services/Calibration/Relearn Functions】K10Elite Wired OBD2 Diagnostic Tool comes with 40+ Functions, Such as Oil, EPB, SAS, Throttle, BMS, TPMS Reset, ABS Bleeding, Injector Coding, Fuel Trim Reset, Cylinder Power Balance, Crankshaft Sensors Relearn, Zero Point Calibration, Fuel Injector Balance, Stop/Start Reset, A/F Reset, Elec.Throttle Relearn etc. It can provides step-by-step maintenance Guide Function for Volkswagen/Audi/Skoda/Seats etc. FR-EE UPDATE for 2 YEARS,Additional Savings
- 【Efficient Bi-Directional Control & ECU Coding】K10 ELITE can be used to verify diagnosis and pinpoint repairs needed with Powerful Active Tests, Such as Fuel Injector, Coolant Fans, Coolant Pump, Windshield Wipers, EGR Valve, Sunroof, Windows etc. It supports Online/ECU coding for vehicles, which helps to match and code after ECU replacement, personalized car settings including Light, ABS Module etc. It can also unlock hidden functions like movement pointer, horn alerts, disable seat warning etc
This product presentation was made with AAWP plugin.
Last update on 2025-04-26 / Affiliate links / Images from Amazon Product Advertising API
