After a preliminary review of consumer complaints and other information related to alleged defects, NHTSA obtains information from the manufacturer(including data on complaints, crashes, injuries, warranty claims, modifications, and part sales) and determines whether further analysis is warranted. If warranted, the investigator will conduct a more detailed and complete analysis of the character and scope of the alleged defect.
NHTSA Action Number: PE10024
Date Opened: 2010-07-19
Date Closed: 2010-11-24
Manufacturer’s Name: Chrysler
(FCA US, LLC)
Component Description: LATCHES/LOCKS/LINKAGES:HATCHBACK/LIFTGATE:LOCK
Summary Description: Rear Hatch Strut Support Failure
Summary
See Attached Closing Report.
Read More...NHTSA Action Number: PE10022
Date Opened: 2010-07-12
Date Closed: 2011-09-13
Manufacturer’s Name: Chrysler (FCA US, LLC)
Component Description: ELECTRICAL SYSTEM
Summary Description: Loss of Headlight Illumination
Summary
To date, ODI has interviewed several complainants who confirmed that the headlights fully extinguish, and remain extinguished, on an intermittent basis.In most cases this occurred while the vehicle was in motion.The occurrences do not show a repeatable pattern, and the problem occurs at a low frequency, typically one or more weeks between failures.For this reason most complainants have not attempted diagnosis or repair of the problem, so the cause is unknown, and the problem continues to occur.In the cases where repairs have been attempted, which consisted mainly of headlight switch and body control module replacements, mixed success is reported.In interviews complainants advised ODI that they can usually toggle the headlight switch, or turn on the high beams by actuating the column stalk (pulling it upward), when the headlights unexpectedly turn off.Complainants report that toggling the switch is usually effective, and the high beams have always been available when the column is used.During the course of the interviews ODI was able to obtain a few suspect headlamp switches for further evaluation.No verifiable crashes or injuries have been identified in the vehicle owner complaints (VOQs).Chrysler notes that its complaints also include allegations of dimming or flickering of the headlights in addition to loss of headlamps, and that their analysis of available data indicates a declining trend occurring in the field.Chrysler data reports two alleged crash incidents; one where a consumers vehicle lost forward lighting and struck a deer, and one where a consumer alleged their lighting stopped working, causing them to depart the roadway and drive into a ditch.A minor injury is alleged in this second incident.Both incidents occurred several years ago, and neither allegation has been confirmed by ODI.ODI is upgrading this investigation to an Engineering Analysis (EA11-010) to continue its analysis of the alleged defect and its consequences, which will include additional analysis of consumer reports, their frequency and trend, and Chrysler's technical information for the headlight system and its components.Additionally testing will be conducted to evaluate possible root cause(s) of the alleged defect, and will include analysis of suspect components collected from the field, and/or assessment of subject vehicles that have reportedly experienced the condition.
NHTSA Action Number: PE10023
Date Opened: 2010-07-12
Date Closed: 2011-12-21
Manufacturer’s Name: Kia America, Inc.
Component Description: FUEL SYSTEM, GASOLINE
Summary Description: Fuel Spill During Refueling
Summary
Complaints allege that while refueling the vehicle, fuel can spill out or spit back from the fuel filler port on model year (MY) 2003 Kia Sorento vehicles (subject vehicles).Consumers report that the spilled fuel can splash on the person fueling the vehicle, or on the side of the vehicle and the ground.The subject vehicles are equipped with an evaporative emissions control system that, among other things, manages air exchange between the fuel tank and the atmosphere in an environmentally safe manner.The system consists of a vapor canister, various control valves and tubing, and a canister filter (fuel tank air filter) through which the air that flows in and out of the fuel tank must pass.Kia's testing found that if the canister filter becomes significantly clogged, excess pressure can build up in the fuel tank and cause fuel to spit back from the filler port during refueling.Kia has stated that the canister filter requires regularly scheduled service maintenance; however, the component is not listed as a maintenance item in the owner's or service manual for the subject vehicles.ODI notes that Kia does list the filter on the maintenance schedule in the owner's manual for MY 2005 and newer Kia Sorento vehicles.To address the issue of fuel spit back during refueling, Kia will conduct a service campaign of approximately 86,000 MY 2003 and 2004 Kia Sorento vehicles.The campaign will provide a one-time replacement of the canister filter, at no cost to the owner.Kia will begin notifying the affected owners in late January 2012 and will inform the owners that the filter must be serviced at regular intervals.Kia will also provide an updated service maintenance schedule.Consumers should refer to the service campaign bulletin number SC092 available in the investigative file.A safety-related defect trend has not been identified at this time and further use of agency resources does not appear to be warranted.Accordingly, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists.The agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.
NHTSA Action Number: EA10005
Date Opened: 2010-07-02
Date Closed: 2012-06-25
Manufacturer’s Name: Dorel Juvenile Group
Component Description: CHILD SEAT:HARNESS:STRAP/WEBBING
Recall Campaign: 11C001
Summary Description: Harness slippage
Summary
The Dorel Juvenile Group (DJG) child seats that are the subject of this investigation are equipped with a center front adjuster (CFA) and were manufactured in 2008 and 2009. The CFA functions as a locking mechanism that locks the shoulder harness in an adjusted position.After the harness of the child seat has been placed over the child's shoulders and buckled, it must be adjusted, or tightened, by pulling out on the tightening strap running through the CFA.The CFA is spring loaded to a normally closed position and the ?locking pawl (pawl) locks the harness tightening strap of the CFA in the adjusted position.The pawl permits movement of the strap in the tightening direction only.In order to release or loosen the harness adjustment, the pawl must be pressed down to open the CFA and unlock the adjusting strap.DJG's CFA is not used by other child seat manufacturers.The Office of Defects Investigation (ODI) opened this investigation as PE10-009 on March 5, 2010 based on two reports from a consumer alleging the CFA would not securely lock the harness on two different model year DJG Vantage Point child seats.Based on information provided by DJG and additional consumer reports received by ODI on other model DJG child seats that use the CFA, the investigation was upgraded to EA10-005 on July 2, 2010.The scope of the investigation was expanded to include all DJG child seats manufactured in model years 2008 and 2009 equipped with the CFA.The consumer reports associated with the investigation allege the occupant harness slips while in use and becomes loose.A loose harness increases the risk of injury in a crash.There were no reports of CFA failure in a crash.On February 10, 2011, DJG submitted a Defect and Noncompliance Information Report to conduct a safety recall (11C-001) of certain subject child seats to remedy a condition where the pawl does not fully engage the harness tightening strap in the CFA.The recall affects approximately 795,000 seats manufactured from May 1, 2008 through April 30, 2009 and includes the following models:Prospect, OnBoard, Alpha Omega Elite, Alpha Omega, Mico, Enspira, Priori, Vantage Point, Avenue and Uptown.Seats of these models that were manufactured prior to May 1, 2008 and after April 30, 2009 are not included in the recall because the CFA was produced using a different process. ODI continued its investigation (EA10-005) as there were other models with a CFA manufactured from May 1, 2008 through April 30, 2009 that were not included in the recall scope.These models include the Summit, Scenera, Hi Back Booster, Designer 22, Apex, and Touriva.As part of this investigation, NHTSA's Vehicle Research and Test Center (VRTC) conducted extensive evaluation and testing, including FMVSS 213 sled tests, on both recalled and non-recalled models.The investigation did not reveal the existence of a safety-related defect trend in the CFA in the models that were not recalled. A safety-related defect trend in the non-recalled models has not been identified and further use of agency resources does not appear to be warranted.Accordingly, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist.The agency will take further action if warranted by the circumstances.The ODI reports cited above can be reviewed online at www-odi.nhtsa.dot/complaints under the following identification numbers: 10291755, 10341694, 10322923, 10362638, 10313028, 1026596, 10290085, 10317274, and 10346913.Additional information is provided on the following pages.
NHTSA Action Number: PE10020
Date Opened: 2010-06-28
Date Closed: 2011-06-28
Manufacturer’s Name: BMW of North America, LLC
Component Description: STEERING
Summary Description: Sticky Steering
Summary
ODI has evaluated the sticky steering condition, which included reviews of complaints and warranty claims, interviews and surveys of owners of complaint vehicles, road tests of complaint vehicles, and a review of BMW's engineering and test data.ODI found the sticky steering condition does not result in a significant steering effort, thus the impact on the driver's ability to control the vehicle does not appear to be significant.A safety-related defect trend has not been identified at this time and further use of agency resources does not appear to be warranted.Accordingly, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists.The agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.See the attached report for additional information.In addition, during this investigation, ODI became aware of allegations of failure or loss of electric power-assisted steering on the subject vehicles.As a result, ODI is separately reviewing this issue to determine whether additional agency action is needed.
← Previous 1 … 136 137 138 139 140 … 1,059 Next →
Search NHTSA Database for Recalls
Search NHTSA Database for (TSB’s) Technical Service Bulletins
Technical Service Bulletins TSB’s List
Search NHTSA Database for Vehicle Complaints
- [2025 Newly Added 7 RESET FUNCTIONS] 2025 New Ver. obd2 scanner diagnostic tool CRP123X Elite ADD NEW SPECIAL FUNCTIONS for FREE--Throttle Adaptation, Oil Reset, SAS Reset, BMS Reset, Brake Reset, D-P-F Regeneration, ABS bleeding. Before the trip to the mechanic, launch obd2 scanner crp123x elite can do deeper diagnosis for the car system and react with accurate data in minutes. More, the list of compatible models has been expended. Upgrading frequency is regular, occurring monthly even weekly.
- [FCA AutoAuth &Free Updates for Lifetime]. LAUNCH CRP123X provides no-fee upgrades. Continually enhance vehicle diagnostic software, can diagnose 1996-2025 vehicles with a massive global vehicle database. With integrated AutoAuth, diagnose 2018+ FCA SGW-equipped cars.Yearly functional upgrades ensure CRP123X purchased years ago to keep up with newer diagnostic advancements. Beyond that, we'll always be working on behind-the-scenes bug fixes to drive your scan tool in excellent condition.
- [Accurate & Intuitive Multi System Diagnosis] Will you be confused about what happens when the warning light of transmission, ABS, and SRS Airbag check engine flashes? Launch obd2 scanner diagnostic tool CRP123X to pinpoint the problem components for a faster diagnosis for your car instead of taking your car to the dealership, and will turn off the warning light for you after fixing the problem, make to know more about your cars and do your own repair.
- [Multiple Display of Live Data + DTC Code Definition Explanation] Launch car tools show real-time data of oil temp, pressure, transmission temp, engine speed, coolant temperature, you will know which car part is abnormal. Data can be shown in a single, multi- graph, and merge two graphs for analysis（merge 4 PIDs in one). It’s convenient for car owners to purchase auto parts and replace it by yourself, 🔥Code Search,DTC Library provide massive information.
- [2025 Hardware Upgrade & One-click Recognition] Faster! Stable! CRP123X Elite car diagnostic scanner has a new processor, Android 8.1, 32GB of memory, 5-inch touchscreen (720P), 6100mAh rechargeable battery,. Wireless WiFi connection embarks on hassle-free faster renewing with one click. LAUNCH code reader effortlessly recognizes vehicle information( (vehicle make, model, and year info) through one-tap automatic VIN scanning, with no manual input, just swift and precise data at your fingertips.
- 【Recom-mended by YouTube Machinists】We are proud to tell that LAUNCH X431 PROS V+ 5.0 has been recom-mended as "" Per-fect Overall Car Diagnostic Scanner "" by famous editors, and also highly recom-mended by YouTube machinists.
- 【What Are the 2025 PROS V+ 5.0 Hardware Changes】With new in-house developed screen; 8.0 MP Pixel Rear Camera;Android 10.0 System; 2.4GHz&5GHz Dual-Frequency Wi-Fi, the transmission rate is 4Xfaster than old version; 4+64GB provides larger data memory; 6300mAh battery lasts 15+h work; CPU Updated to 2.0 GHz quard-core. greatly increased the speed of running multiple task; 8XFAST AUTO VIN technology;DBSCar VII connector equipped with indicator lights, which is more intuitive and user-friendly
- 【Technology Itself is Proof of Quality】LAUNCH DBSCar VII+Self-developed screen.Using USB type A/USB type C connectors and DBSCar VII VCI connector can make the process of diagnosing and matching faster and more stable, DBSCar VII connector equipped with indicator lights, which is more intuitive and user-friendly. The latest self-developed screen from LAUNCH, in addition to its strong anti-fall ability, is different from other launch models in sensitivity and touch.
- 【2025 Newly Added CANFD】With the CANFD Connector, you can seamlessly diagnose a wider range of vehicle models (up to model year 2025, see image below for supported models) using advanced CANFD protocols. Gone are the days of being limited to certain models - now you can confidently handle the latest models, even those with the most advanced systems.
- 【Bi-Directional+Online Coding+Over 38 Reset Services+Adaptation+Initialization+ Matching】PROS V+ 5.0 scan tool Elite also support:K-EY programming,Gear/ SAS/ EPB/ TPMS/ BMS/ETS/Oil/Brake/AFS/GEARBOX/SUNROOF/SUS Reset,ABS Bleed, Injector coding.Gives you the ability to use dealership level relearn procedures to complete repairs.You can get 100+ advanced special functions under the""vehicle brand""-""menu""-""system"" - ""special functions"".
- 【2025 UPGRADED VERSION, NEW CHIPS, ADD MORE FUNCTIONS, No Extra Software Fee】Faster! The 2025 CRP123I V2.0 car diagnostic scanner has a new processor, Android 8.1, 32GB of memory, 5-inch touchscreen (720P), 6000mAh rechargeable battery, One-touch Wi-Fi Lifetime Free update for more vehicle coverage, bug fixes,newly added parameters, and functionality to help you access, diagnose and fix more vehicles faster,upgrade of CRP123I.
- 【Newly Added 7 RESET FUNCTIONS】+ 【BATTERY VOLTAGE TEST】2025 New Ver. scan tool CRP123I V2.0 ADDS NEW SPECIAL FUNCTIONS-Throttle Adaptation,Oil Reset,SAS Reset,ABS Bleeding,BMS Reset,EPB Reset, D.P.F Regeneration,to maintain your vehicle system safely and efficiently.Graphing the battery voltage easier and more intuitive for the real-time monitors to check.It does not only reveal what error codes your car is producing,but also erase your vehicle's check engine light after the problem is fixed.
- 【Multi System Diagnostic Tool】LAUNCH CRP123I V2.0 obd2 scanner check ABS/SRS/AT/ENG systems &10 OBD2 modes, read/clear fault codes,Online Google Search, 4 IN 1 Graphing.Store and playback of dynamic data stream help to quick analysis and diagnosis. Generate vehicle health reports with one click and share them with your email via W-ifi which helps avoid blind maintenance. CRP123I costs less, in the long run, saving you up to $2000 each year.
- 【Fre-e Lifetime Update + AutoAuth for FCA SGW+ Auto Vin】This scan tool features One-click w-ifi update and fre-e for fixing more bugs; Realtime battery voltage graphing helps to Judge the state of the battery; Auto Vin,facilitate accurate diagnosis and provide useful information.Besides,CRP123I V2.0 support AutoAuth for FCA SGW,For 2017 and later FCA Vehicles with Secure Gateway Module (SGW),with no limitation.
- 【Cover 10000+ Models & 90+ Car Brands】CRP123I V2.0 Elite launch scanner is capable of diagnosing fault codes on more than 10000+ vehicles from 1996 to 2025 and 90+ car makes worldwide. Support almost all OBDII cars such as SUVs, minivans, light-duty trucks, etc. It's an excellent tool for all types of mechanics from novice to pros. NOTICE: Compatibility will vary on vehicles' model and year, pls c-ontact us via Q&A/message before purchase.
- 【J2534 PROTOCOL WITH SMARTLINKC】 LAUNCH X431 PRO3S+ ELITE scan tool with newly upgraded smartlinkC V2.0. The SmartLinkC is a communication interface supporting J2534 specifications. Of course, it also can be used as a J2534 PassThru device, working together with the PC installed with the OEM diagnostic software to perform the J2534 protocol.J2534 protocol is the only solution for problems ranging from driveability and loss of power to poor fuel economy.
- 【INTELLIGENT TOPOLOGY MAP TO FASTER FULL SYSTEMS DIAGNOSIS】 X431 PRO3S+ELITE bidirectional scan tool with new-added intuitive topology mapping. Harnesses intuitive topology mapping for comprehensive visualization of the vehicle all system. It shows all available control units in different colors, the numbers of system, the scanned system, and the scan results, bringing maximum convenience & superfast speed for you to do swift diagnosis & high-level repairs.
- 【TOP HARDWARE CONFIGURATION, UPGRADED OF LAUNCH X431 PRO3S+】 LAUNCH X431 PRO3S+ELITE diagnostic scanner possess with Android 10.0 OS; CPU 4-Core Processor, 2.0 GHz. Greatly increased the speed of running multiple task. 2.4GHz/5GHz; 6300mAh/7.6V stronger battery capacity; 10.1 Inch Touchscreen with 8MP camera; AUTO VIN; 4GB+64GB storage memory; 20X faster transmission rate, save more vehicle documents and customer data; Supports 25+ Software Languages, such as EN, DE, FR, SP nd JP and so on.
- 【3000+ ACTIVE TEST/BI-DIRECTIONAL CONTROL LAUNCH SCANNER】 LAUNCH X431 PRO3S+ELITE HD automotive scanner is a cost-effective bidirectional scanner that deserves owned by every repairing DIYers and mechanics. You can easily send command signal at fingertips from the scanner to various module actuators to test component integrity and functionality in minutes or even seconds to tell if replacement or repair is needed.
- 【COMPLETE 60+ HOT RESETS, CALIBRATION, INITIALIZATION, RELEARN】 LAUNCH X431 PRO3S+ELITE SmartLinkC escaner automotriz professional enjoys 60+ special service, such as Oil Reset, ABS brake bleed, EPB, SAS, BMS, Suspension, Injector reset, Power Balance, Turbo Calibration, VGT, Transmission Adaption, Throttle Adaptation, matching and etc. rigorous on-site testing has been performed to ensure 100% availability.
This product presentation was made with AAWP plugin.
Last update on 2025-04-24 / Affiliate links / Images from Amazon Product Advertising API
