After a preliminary review of consumer complaints and other information related to alleged defects, NHTSA obtains information from the manufacturer(including data on complaints, crashes, injuries, warranty claims, modifications, and part sales) and determines whether further analysis is warranted. If warranted, the investigator will conduct a more detailed and complete analysis of the character and scope of the alleged defect.
NHTSA Action Number: PE10032
Date Opened: 2010-08-23
Date Closed: 2011-02-16
Manufacturer’s Name: Chrysler
(FCA US, LLC)
Component Description: FUEL SYSTEM, GASOLINE
Summary Description: Fuel Spill During Refueling
Summary
ODI found the rate of warranty claims related to fuel spit back on the subject vehicles is lower than other vehicles previously recalled to correct defects related to fuel spit back.Although the rate of complaints reported to the agency on the subject vehicles is higher than or similar to the rates experienced in previous investigations where safety recalls were conducted, ODI suspects that the NHTSA safety complaints submitted by subject vehicles owners may have been influenced by internet related publicity both before and during this investigation.A safety-related defect trend has not been identified at this time and further use of agency resources does not appear to be warranted.Accordingly, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists.The agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.See attached report for additional information.In addition, Chrysler is initiating a lifetime warranty program, at no cost to the consumer, to address the fuel spit back problem in approximately 135,000 model year 2007-2008 Jeep Wrangler vehicles built from March 1, 2007 to March 31, 2008.Chrysler will notify all affected vehicle owners of this action.Consumers should refer to the warranty and service bulletins and sample owner notification letter available in the investigative file.The vehicle build date can be found on the certification label located on the driver door or door jamb.
NHTSA Action Number: PE10033
Date Opened: 2010-08-23
Date Closed: 2011-07-15
Manufacturer’s Name: Ford Motor Company
Component Description: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
Summary Description: Engine Stalling
Summary
The subject vehicles suffered from a design issue whereby water could run down onto the cowling under the hood and located in the area of the windshield wipers and then drip onto a computer module, the Powertrain Control Module (PCM), which could be manifested in a variety of symptoms depending on which part of the circuit board became wet or which of the connector pins shorted out.In addition to causing an engine to stall, which may or may not then restart, the water intrusion could also cause the transmission to shift poorly, the vehicle to have erratic power, a malfunction indicator light to come on, or result in an inability to start the vehicle, an inability to shift the vehicle into either forward or reverse. Also the problem could cause a higher than normal idle RPM in Park, or for the radio to malfunction, or the interior lights to stay on.During this investigation ODI was concerned with the effect of the engine stalling or a drastic and sudden loss of power either of which may create a safety risk.In reviewing the actual number of these types of incidents, collectively referred to here as engine stalls, the number was found to be below what would be considered a defect trend.For example, the number of engine stalls identified in Ford's warranty claims for the model year (MY) 2004 subject vehicles, the MY with the most failures, was 200 out of population of 125,865, for a failure rate of 0.16%.The one crash recorded by a complainant to NHTSA, VOQ 10311522, alleged that the engine stalled, due to water intrusion into the PCM, while the road was turning causing her to go off the road and according to the police report the vehicle then hit an embankment and a tree stump. Ford reported in their response that there were three alleged crashes but none of these were validated as being caused by a problem with water intrusion into the PCM causing a stall.Accordingly this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist.The agency will continue to monitor complaints and other information relating to the alleged defect in the subject vehicles and take further action in the future if warranted.
NHTSA Action Number: EQ10007
Date Opened: 2010-08-19
Date Closed: 2012-08-06
Manufacturer’s Name: WEBASTO PRODUCT NORTH AMERICA, INC.
Component Description: VISIBILITY:SUN/MOON ROOF ASSEMBLY
Recall Campaign: 10V421
Summary Description: Webasto Sunroof Separation
Summary
On August 10, 2010, Webasto notified the NHTSA that it had decided certain Hollandia 600/700 & Hollandia TVS 900 aftermarket sunroofs contained a safety related defect. Webasto stated that these sunroof models, manufactured between 2002 and 2010, may experience an adhesive bond failure where the sunroof glass attaches to its frame. This failure increases the risk of the glass detaching from the vehicle and causing injury to other motorists or pedestrians.This recall was assigned number 10E-038. Webasto and its counsel met with RMD on August 18, 2010 to discuss the recall's next steps. RMD learned that the majority of these products are installed by a third party, on new motor vehicles that have not yet been retailed, often at the request of a new car dealership. These installers are required to notify the NHTSA of any new vehicles they altered by way of a Part 573 Defect Report. On September 2, 2010, RMD issued an information request (IR) letter to Webasto requesting a list of companies who purchased the defective sunroof models.Webasto replied on September 9, 2010, submitting a purchaser list to NHTSA's Office of the Chief Counsel (NCC) for confidentiality consideration.NCC granted this confidentiality request as the release of Webasto's purchaser list could cause substantial competitive harm.Due to the large number of companies that purchased these sunroofs, RMD worked with Webasto to ensure notifications to Webasto's authorized installers (AIs) included instructions on how to file a Defect Report with NHTSA should one be required.For those AIs that altered new vehicles (vehicles not yet delivered to the first retail purchaser), the AI notification letter offered guidance on how to submit a Defect Report to NHTSA and instructions that a third party, Impartial Services Group, LLC (ISG), would be contacting them to obtain VIN information for vehicles they altered as new.ISG obtained VIN information from each AI and returned to them a computerized list of vehicle year, make, and model as this information is necessary for a Defect Report submitted to NHTSA.ISG then utilized the acquired VIN information to notify the current registered owners about the safety recall. On July 5, 2011, RMD mailed IR letters to 87 AIs that had previously communicated to Webasto that they had maintained vehicle VIN records for their past alterations, but had not yet sent those records to ISG.Forty-five (45) of these companies did not respond to RMD?s IR letter, however, some did take action by submitting their records to ISG.RMD chose to mail a second IR letter on April 19, 2012, to 8 AIs who were identified as having the largest quantities of sunroof installations that needed to be recalled.Four (4) companies responded by filing Defect Reports with NHTSA and sending their affected VINs to ISG for consumer notification.The information for the 4 nonresponsive companies: Automotive Concepts, Classic Auto Interiors & Accessories, Dundalk Glass Center, and Kenny?s Auto Stylist will be forwarded to NCC for possible enforcement action at their discretion. With an ISG generated vehicle list and a Defect Report, RMD received safety recalls from 111 AIs recalling over 74,000 vehicles.It is very likely that more AIs contacted ISG and Webasto to submit their records of affected vehicles, but failed to notify the NHTSA of their actions.Webasto has mailed over 231,000 owner notification letters to vehicle owners that have recalled sunroof assemblies.This investigation is concluded as we believe we have realized the safety benefits that can be reasonably achieved through an Equipment Query of this scope.This EQ is cl
NHTSA Action Number: EA10006
Date Opened: 2010-08-18
Date Closed: 2010-09-16
Manufacturer’s Name: General Motors, LLC
Component Description: ENGINE AND ENGINE COOLING
Recall Campaign: 10V384
Summary Description: Engine Stall
Summary
On August 26, 2010, Toyota submitted a Defect Information Report to the National Highway Traffic Safety Administration (NHTSA) regarding problems with Engine Control Modules that could result in engine stall while driving in certain model year (MY) 2005 through 2008 Toyota Corolla, Corolla Matrix and Pontiac Vibe vehicles equipped with the 1ZZ-FE engine and two-wheel drive and manufactured between April 19, 2004 and January 2, 2008.Toyota's report indicated that cracks may develop at certain solder point or on varistors on the ECMs.According to Toyota, such cracks generally resulted in engine warning lamp illumination, harsh shifting or engine no-start.In some cases, if the cracking occurs on particular solder points or varistors, the engine could stop while the vehicle is being driven.Toyota will notify owners of subject vehicles that they should return their vehicles to a Toyota or Pontiac dealer.Dealers will be instructed to inspect the production number of the ECM for each vehicle and replace the ECM if necessary.On November 30, 2009, the Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE09-054) to investigate alleged engine stall while driving in model year (MY) 2006 Toyota Corolla and Corolla Matrix vehicles.In its response to ODI's information request, submitted on March 2, 2010, Toyota indicated that it had identified two possible conditions with ECMs used in MY 2005 through 2007 Toyota Corolla and Matrix vehicles:1) cracks forming between the IC and the board caused by an improperly cured conformal coating applied to the circuit boards after the soldering process is completed; and 2) cracks occurring in a variable resistor (varistor) due to overheating.During the manufacturing process a glass coating is created on the surface of the varistor.Between March and August 2010, Toyota began collecting ECMs from the field to further investigate failure modes that may result in engine stall.Toyota also conducted durability testing on ECMs collected from in-use vehicles to assess whether the problems may be a continuing trend. In addition, they conducted durability testing in order to assess whether this problem was a continuing trend.Toyota found that 4 of 32 collected ECMs malfunctioned after thermal shock testing.Toyota also confirmed that cracking could develop at solder points on the ECM circuit board that could lead to engine stall while driving and that this trend was likely to continue.The manufacturer failure data in this resume is limited to MY 2005 through 2007 Toyota Corolla and Corolla Matrix vehicles.Based on Toyota's recall, this Engineering analysis has been closed.
NHTSA Action Number: PE10030
Date Opened: 2010-08-12
Date Closed: 2010-12-14
Manufacturer’s Name: Kia America, Inc.
Component Description: STEERING:COLUMN
Summary Description: Steering Shaft Separation
Summary
The Office of Defects Investigation (ODI) is aware of a single complaint on the subject vehicles that alleges the hand wheel became mechanically de-coupled from the road wheels when the intermediate steering shaft universal joint separated from the upper steering column.It appears that the intermediate steering shaft in the complaint vehicle was disassembled and then improperly re-assembled with the universal joint not fully engaged with the upper steering column's splined shaft and the pinch bolt was not secured in the retaining groove when fastened.The component supplier has added additional fool-proofing measures to the assembly process to further reduce the likelihood of improper assembly.Kia inspected a total of 3,695 subject vehicles and steering column assemblies at the component supplier, the vehicle assembly plant in Korea and at US ports in the weeks immediately following the opening of this pursuit and found no evidence of improper assembly.Kia also conducted a service action (SA057) to inspect another 169 subject vehicles (out of 336) manufactured on the same day as the complaint vehicle and a total of 594 subject vehicles (out of 1,747) manufactured during the same week as the complaint vehicle and found no issues to report.An additional 342 subject vehicles outside the scope of the service action were also inspected and again Kia found no evidence of improper assembly.A safety-related defect trend has not been identified at this time and further use of agency resources does not appear to be warranted.Accordingly, this investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist.The agency will take further action if warranted by the circumstances.
← Previous 1 … 134 135 136 137 138 … 1,059 Next →
Search NHTSA Database for Recalls
Search NHTSA Database for (TSB’s) Technical Service Bulletins
Technical Service Bulletins TSB’s List
Search NHTSA Database for Vehicle Complaints
- 🔥🔥🔥【2025 Autel Impressive MK808BT PRO, Powerful And Cost-Effective Than Autel MK808S MK900 MX900 MK900BT MX808S】Upgraded of the wired OBD2 code reader MaxiCOM MK808S MK808, functioning as MK900BT (save 100+USD), Autel scanner MK808BT PRO features bidirectional control as MS906 PRO, making it the most powerful & cost-effective Autel bidirectional scanner. It makes a great leap: 28+➡40+ Resets, 50+➡3000+ Active Tests, 2G➡4G, 16G➡64G, 0.9m➡10m working range, eli.minating cable limit. 7in user-friendly UI for BT506 battery test(NOT by other maxicom 808 900 series cable OBD scanners like: Autel MK808 MK808Z MK900 Autel MX808, etc.).
- 👍【New Next-Level Bidirectional Control, 50➡3000+ Tests, Same As MS906 PRO】Unlike the Autel MS906BT MS906 DS808 MP808 MK808 and MX808 car diagnostic scanners, which offer only 50 functional tests, the Autel bidirectional scan tool MK808BT PRO features over 3000 active tests. These tests are widely used on car subsystems to help technicians quickly check if the car's actuators are functioning properly. Such as ABS, windows, rearview mirrors, wipers, sunroofs, fuel injectors, AC clutches, coolant fans, radiator fans, coolant pumps,etc. Warm Note📢: All functions are vehicle-specific, not universal to all vehicles,pls send VIN to 📞auteldirect @ outlook . com📞check compatibility before order.
- 👍【28+➡40+ Hot Services for 150+ Makes】Autel scan tool MK808BT PRO, upgraded with a BT VCI Mini(valued at 120USD), surpasses the old wired OBDII scanner MK808S MK900, by providing a convenient 10m wireless working range, offering greater freedom and comfort compared to the 0.9m cable limit of the MK900 MK808S car scanner. New features include VIN Check across different modules for comparison and 40+ resets, such as injector coding, ABS autobleed, Oil reset, SAS cali.bration, BMS, throttle relearn, suspension adjustments,etc.
- 👍【All Available Module Diagnosis - OE-Level Scanner】The OE versatile OBDII scan tool MK808BT PRO escaner para autos effectively works with all car systems: ABS, ECM, BCM, SRS, TCM,etc. It identifies vehicles via AutoVIN/manual input/select, like S.nap-on tools, it can ✔read/clear 7000+ DTCs, ✔read ECU info, ✔view 5-in-1 live data, ✔perform active tests, and ✔reset services. ✔Reports can be shared via QR-code and printed, working globally and 21+ multilingual. Supports 150+ US/EU/Asian makes, with ongoing updates from 2023 to 2025. Note📢: The AutoVIN function usually works for post-2006 cars, depending on whether the vehicle's VIN is stored in the ECU. You can always do manual input/select.
- 🏆【Test Battery with BT506 (MK808S MK900 are Not Supported)】Autel MK808BT PRO diagnostic scan tool, when paired with the BT506, performs professional cranking/ charging system tests and in-vehicle and out-of-vehicle battery tests with 98%+ accuracy, thanks to advanced adaptive conductive - significantly higher than the market average of 50%. Tests all 6V/12V batteries with 100-2000 CCA, incl. popular types: Flooded, AGM, AGM Spiral, EFB, GEL batteries. Compatible with CCA, CA, SAE, EN, IEC, DIN, JIS and MCA standards.
- 🔥🔥🔥【2025 NEWLY RELEASED BI-DIRECTIONAL CONTROL】As the 2025 upgraded version of MaxiChek MX808, our Newest MK808S auto diagnostic scanner for all cars inherits the powerful Bi-directional Control which makes it the most cost-effective Autel scanner (without breaking the bank, same as MP900BT and MS906 PRO). Active test is widely used on car subsystems to help you check if the car actuators are all in good condition. Such as windows, rear mirrors, sunroof, wipers...
- 【28+ MOST POPULAR RESET SERVICE FOR 150 MAKES】Autel versatile OBDII scanenr MK808S, full level-up of MX808, work as MX900, MK900, MK900BT, supports 150+ car brands worldwide & FCA AutoAuth. Like the OBD2 code reader MaxiCOM MK808BT Pro, MK808S is equipped with 28+ hot services including Oil Reset, SAS Calibration, ABS Bleeding, Injector Coding, Battery Registration, etc. MK808S ranks top in professional automotive tablets and keeps updating to support more newer modes from 2023 to 2025.
- 【ALL SYSTEM DIAGNOSTICS, FACTORY-LEVEL SCANNER】The MK808S dealer-level scanner, like Snap-on tools, effectively works all cars for all system diagnostics. It reads/clears codes, provides ECU info, displays 5-in-1 Live Data, performs active tests, and special functions for all available modules. With a few clicks, you can easily understand the vehicle's condition. The convenient Wi-Fi printing feature allows you to generate a detailed report, highlighting the exact nature of the problem.
- 【AUTO SCAN & AUTOVIN, 5X FASTER】How much have you spent on car maintenance? Even a minor issue can take up a significant amount of time. The MK808S is designed to improve your work efficiency. With its AutoVIN technology, you can identify your vehicle's make, model, and year information with just one click. The convenient AutoScan feature automatically scans all of the vehicle's ECUs and detects any fault codes. Check AutoVIN compatibility, please contact us at 📞 MotorzoneUS @ outlook . com 📞
- 【WHY MK808S STANDS OUT】✅Autel's escaner automotriz professional, MK808S, provides the same funcntions as the MK808BT PRO at a lower cost. MK808S not only helps you save on subscription expenses (124.5 USD vs. 150 USD) but also ensures flawless utilization of all functions even without updates. ✅As Autel's flagship model, MK808S is the upgraded version of the old MX808 MK808BT. It covers global coverage for 150 car brands, making it a versatile and cost-effective choice.
- 🔥🔥🔥【2025 AUTEL FLAGSHIP MK900BT MK900-BT, NEW MODEL OF MK808S MK900 MX900 MK808BT MX808S】2025 newest Autel MK900BT retains all features of MK808S MX900 MX808S MK808Z MK808Z-BT MK808K-BT, while EXTRA added powerful functions (value 2000+ bucks). The Pro-level Autel MK900BT makes a big leaps: 28+➡40+, 50+➡3000+ Active Tests, 2025 NEW✅CAN FD & DOIP protocols ✅Pre&Post diagnostic report ✅WIFI Print ✅Auto VIN&Auto Scan 2.0 ✅Scan VIN/ License ✅Battery Test(BT506). Enjoy larger 8in 1280*800 user-friendly UI (replace 7in Mini MK808S MK808Z MP808S), optimized 7000mAh battery ensures full-day work (MK808Z-BT MK808K-BT only 5000mAh), 2G➡4G,16G➡64G, 33feet working range remo.ves cable restrictions.
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS906 PRO】Differ from MS906BT MS906 MP808 MK808 MX808 MK808BT only 50 tests, Autel scanner MK900BT escaner automotriz professional offers 3000+ active tests, it can send command to ECUs & monitor actuators operation, quickly locating faulty components. Bidirectional scanning takes your diagnostics to the next level with menu lists 3000+ active tests, such as windows, rear mirrors, sunroof, wipers, fuel injector, coolant fans, radiator fan, AC clutch, coolant pump and more.
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full level-up of OBD2 code reader MaxiCom MK808S MK808 MK808Z MX808S MK808Z-BT with 28 service, Autel scan tool MK900BT/ MK900-BT offers 40+ maintenance service on 150+ brands 10,000 vehicles from 1996-2024-2025. Hottest Services like: Oil Reset, ABS Bleed, SAS Calibration, Injector Coding, SRS, Throttle Reset, Gearbox Reset, Battery Registration etc. Added 12+ advanced resets: rain slash light sensor reset, HVA.C/ SUS calibration etc. Welcome to send Vehicle Make>Model>Year>VIN>Functions you required to 📞autelsupply @ outlook . com📞 check compatibility.
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE/ AUTO VIN】2025 new release Autel MaxiCOM MK900-BT scan tool embodies all system diagnostic with its 8in display for all vehicles. Like Sna.p-on tools, it can perform ✔Read/Clear Codes✔Displays 5-in-1 Live Data✔Record & Playback Data✔Retrieve Info on all available systems like ABS ECM BCM SRS TCM etc. In addition to Auto VIN technology, Autel MK900BT adds Scan License/ Auto Scan 2.0 to identify vehicle’s VIN/ license, make, year, model, no need manual input; One-click WiFi Printing of Pre&Post comparison diagnostic reports, highlight root causes of problems.
- 🔥📢【2025 NEWER CAN FD&DOIP + WIFI PRINT+ PRE&POST SCAN】Autel MaxiCOM MK900BT offer top features typically found only on 2000+ buc.ks table.ts. New protocols CAN FD &DOIP: ✅CAN FD works for GM (2019+) ✅DOIP works for Volv.o 2018+, Jaguar&Land Rover 2017+, BM.W F&G chassis models. ✅WIFI Print One-Click✅Pre&Post Scan, output logical diagnostic contr.ast reports for sharing to your clients. ✅Autel Cloud server offers infinite space to save repair data, never loose data anymore. Upgrade Autel V150 offers 33ft wireless diagnose, stable and faster than MK900 MK808S MK808.
- 【TURN OFF CEL】 This AL319 car diagnostic tool supports Reading DTCs, displaying Live Data, Freeze Frame & I/M Readiness etc to figure out the root cause of the Check Engine Light (CEL) and turning it off, to help you detect any potential problems, and to avoid excessive costs for unnecessary repairs.
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with 7 languages (English, French, Spanish, etc.) and various post-1996 OBD II protocol vehicles (Toyota, Nissan, Honda, Ford, etc.), this OBD II scanner provides accurate and fast diagnosis for worldwide car owners.
- 【FOR END USER & DIYERS】 This error code reader AL319 is “plug and play” and comes with an easy interface. Even if you’re not familiar with vehicle repair, you can quickly take control of this obd2 scanner, and get the information you want.
- 【USER-FRIENDLY DESIGN】 This check engine code reader features a patented One-Click I/M Readiness, TFT color display, built-in speaker, LED Indicator etc. The cable is long enough without being too long and getting in the way. No batteries are needed.
- 【HIGH-QUALITY SERVICES】 12 months warranty from the date of purchase and lifetime free update are offered by this Automobile OBDII scan tool. Welcome to contact us via Q&A, email, or hotline, and our after-sale-service team for technical support.
- 🇺🇸【2025 Flagship Scanner MK900, Combo. of MK808BT PRO MK808S MK808Z MX900 MK900BT】Lagging operation? Limited functions? Few cars supported? You won't see them in 2025 MK900. All-round upgraded ver. of the MK808Z-BT/MK808BT PRO: 28+➡40+ Special Functions; 100+➡150+ Brands Coverage; 1000+➡3000+ Active Tests; Android 10.0➡11.00; 16G➡64G Memory. [✅2025 NEW] CAN-FD/DoIP for new models; Scan VIN/License for 5X-faster VIN Access; Autel Cloud Manage. 1 year upgrades and renew weekly/monthly.
- 🥇【40+ Services, Autel MK900 Made for Workshops】As the 2025 update, escaner automotriz MK900 offers 40+ services for 10,000 vehicles from 1996-2025, surpassing the MK808BT Pro's 28 services. For 500+ bucks, you can get 2000+ bucks worth of functions as Elite II Pro & MS908S Pro II: Oil_Rest/DP.F/SAS/TPMS/BMS/Injector/Throttle/Suspension/Brake_Bleed/TEC-learn/Headlamp/WIN_DR_ROOF/Seat/Lang_Change/CHG_TIRE_SIZE/Airbag_Reset/Trans Adaptation etc. Same as MK900BT MK900-BT, but more cost-effective.
- 🌎【3000+ Active Tests, 150 Makes Support】What if you don’t have a bidirectional scan tool? 5X times longer to find faults. And, have to tear your vehicle apart in serious cases! That’s why you need this obd2 automotive scanner diagnostic tool: 3000+ active test menu & lighting-fast processing & widest-ever 150+ makes coverage. 3000+ actuators that you can directly test: EVAP/VTEC/ETCS (TAC)/Radiator FAN/AC Clutch & Compressor/Injectors/VTC/Cylinder/Starter/Turbocharger and more.
- ⚡【OE All System Diagnosis, Seconds to Get VIN】Decode 7000+ not only generic but also enhanced DTCs from ABS, Airbag, Transmission, TPMS … all systems found in today's cars; this car computer code reader also allows rapidly identifying most 2006+ cars (AutoVIN + Scan VIN/License), and instant diagnostics with only ONE tap. Want to review reports anytime? Use this OE-level scanner to upload diagnostic reports in cloud, or print them out on paper through a connected Wi-Fi printer.
- 🆕【NEW DoIP & CAN-FD, 150+ Brands Coverage】You can always trust Autel scanners: #1 car coverage in industry, superior to most scanner automotriz. If you work on diverse makes/models worldwide, this 2025 Autel MK900 will satisfy you. It’s got the same vehicle coverage as high-end Autel scanners value at 2000 bucks: 150 brands (EU/US/Asian), US top-selling models (1996-2025), FCA & Renault SGW, DoIP & CAN-FD (won't see in equal-level bidirectional scan tools). NO-IP limited version of MX900.
This product presentation was made with AAWP plugin.
Last update on 2025-04-24 / Affiliate links / Images from Amazon Product Advertising API
