CR178 Ducati Quick Shift sensor cable re-routing

NHTSA ID Number: 10162021

Manufacturer Communication Number: SRV-TSB-19-007

Summary

CR178 Ducati Quick Shift sensor cable re-routing - Applicability: Multistrada 950 S MY 2019; Multistrada 1260 S (all model versions) MY 2019; Multistrada 1260 Pikes Peak MY 2019; Multistrada 1260 Enduro MY 2019. This technical service bulletin informs dealers and service managers of the potential for improper installation of the Quick Shift sensor cable (DQS). It also informs them of the requirement for involved units to be inspected, and for DQS sensor cable re-routing in needed. This bulletin also provides VIN information, service instructions and associated illustrations. The bulletin document has been redacted for sensitive information.

(more…)

IK0500061 - CE Bus Steering Won't Return to Center

NHTSA ID Number: 10164502

Manufacturer Communication Number: K0500061

Summary

CE Bus Steering Returnability Diagnostics. Only CE buses built during 1/29/2018 thru 6/11/2019 with Tilt Columns, ESP, and Steering Switch Controls. 2019 and 2020 Model year only

(more…)

TSB140061 - ISL/QSL and ISC/QSC External Oil Leaks From Oil Pan and Oil Pan Gasket

NHTSA ID Number: 10162092

Manufacturer Communication Number: TSB140061-051420

Summary

This Technical Service Bulletin describes the verification and resolution of repeated external oil leaks from the lubricating oil pan and lubricating oil pan gasket for the same engine serial number (ESN), or multiple ESNs in the same application and operating environment with complaints of an external oil leak from the lubricating oil pan and lubricating oil pan gasket. This is an update to a previously submitted communication.

(more…)

TSB170002 - Injector Sleeve Seal Leakage Causing Fuel and Coolant Cross-Contamination

NHTSA ID Number: 10162095

Manufacturer Communication Number: TSB170002-050720

Summary

This Technical Service Bulletin describes the verification and resolution of injector sleeve seal leakage causing fuel and coolant cross-contamination. Shrinkage of injector sleeve seal material can create a leak path between cylinder head cooling jacket and injector bore. This is an update to a previously submitted communication.

(more…)

TSB170004 - Injector Sleeve Seal Leakage Causing Fuel and Coolant Cross-Contamination

NHTSA ID Number: 10162096

Manufacturer Communication Number: TSB170004-050720

Summary

This Technical Service Bulletin describes the verification and resolution of injector sleeve seal leakage causing fuel and coolant cross-contamination. Shrinkage of injector sleeve seal material can create a leak path between cylinder head cooling jacket and injector bore. This is an updated to a previously submitted communication.

(more…)