Cracked LP Gas Quick Disconnect Fitting – 2022 Heartland Fuel Travel Trailers

“This site contains affiliate links for which OEMDTC may be compensated”

May 3, 2022 NHTSA CAMPAIGN NUMBER: 22V294000

Cracked LP Gas Quick Disconnect Fitting

A gas leak in the presence of an ignition source can increase the risk of a fire.

 

NHTSA Campaign Number: 22V294

Manufacturer Heartland Recreational Vehicles, LLC

Components EQUIPMENT

Potential Number of Units Affected 26

 

Summary

Heartland Recreational Vehicles, LLC (Heartland) is recalling certain 2022 Heartland Fuel travel trailers. The quick disconnect fittings in the LP gas system may be cracked, causing a gas leak.

 

Remedy

Dealers will inspect and replace the fittings, as necessary, free of charge. Owner notification letters were mailed June 27, 2022. Owners may contact Heartland customer service at 1-877-262-8032.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


22v294 NHTSA
2022-225 TC

HRV LP Gas Quick Disconnect
Inspection and Replacement instruction

WCC: 99.01.67
.1 inspection/ .3 replace

 

STEP 1: LOCATE THE QUICK DISCONNECT(S);

  • USUALLY THEY ARE LOCATED ON THE BOTTOM OF THE CHASSIS RAIL

 

STEP 2: IDENTIFY THE COLOR OF RUBBER DUST CAP;

  • BLACK RUBBER DUST CAP(S) THAT HAS “ENERCO GROUP” ETCHED ON THE SLIDER – THIS IS A RECALLED QUICK DISCONNECT AND REMEDY IS REQUIRED
  • BLUE RUBBER DUST CAP(S) – NOT A RECALLED QUICK DISCONNECT
  • YELLOW RUBBER DUST CAP(S) – NOT A RECALLED QUICK DISCONNECT

 

STEP 2A: REMOVE THE QUICK DISCONNECT(S);

  • ADJUST ONE WRENCH TO FIT THE HEX FLATS OF THE PIPE NIPPLE INSTALLED INTO THE END OF THE QD WHICH THEN CONNECTS TO A MANIFOLD OR BRACKET CONNECTED TO A LPG HOSE
  • ADJUST THE OTHER WRENCH TO FIT THE BODY OF THE QD, KEEP WRENCH CLOSE TO THE PIPE NIPPLE SIDE OF THE QD
  • KEEP STEADY PRESSURE ON THE PIPE NIPPLE WRENCH, DO NOT ALLOW IT TO ROTATE;
  • UNTHREAD THE QUICK DISCONNECT FROM THE PIPE NIPPLE
  • REMOVE ADJUSTABLE WRENCHES AND SET ASIDE FOR USE AGAIN
  • USE THE WIRE BRUSH TO CLEAN ANY REMAINING SEALANT OR DEBRIS FROM THE PIPE NIPPLE THREADS
  • CLEAN OFF WITH A RAG, ENSURING NOT TO GET ANY DEBRIS INSIDE OF THE PIPE NIPPLE

 

STEP 2B: INSTALL THE QUICK DISCONNECT(S);

  • APPLY EITHER PIPE SEALANT OR YELLOW TEFLON TAPE TO THE PIPE NIPPLE THREADS
  • DO NOT APPLY PIPE SEALANT INSIDE OF THE QUICK DISCONNECT
  • ADJUST ONE WRENCH TO FIT THE HEX FLATS OF THE PIPE NIPPLE INSTALLED INTO THE END OF THE QD WHICH THEN CONNECTS TO A MANIFOLD OR BRACKET CONNECTED TO A LPG HOSE
  • KEEP STEADY PRESSURE ON THE PIPE NIPPLE WRENCH, DO NOT ALLOW IT TO ROTATE
  • HAND THREAD THE NEW QUICK DISCONNECT UNTIL TIGHT ONTO THE PIPE NIPPLE
  • ADJUST THE OTHER WRENCH TO FIT THE BODY OF THE QD, KEEP WRENCH CLOSE TO THE PIPE NIPPLE SIDE OF THE QD
  • TIGHTEN THE QUICK DISCONNECT:
    • IF USING YELLOW TEFLON TAPE: 2 FULL TURNS
  • ORIENT THE LEVER PARALLEL WITH THE GROUND o IF USING LP GAS THREAD SEALANT: 1 FULL TURN
  • ORIENT THE LEVER PARALLEL WITH THE GROUND

 

STEP 3A: IF THE AUXILIARY HOSE HAS A RUBBER BLACK DUST CAP, THE QUICK DISCONNECT NEEDS TO BE REPLACED;

  • ADJUST ONE WRENCH TO FIT THE HEX FLATS OF THE BRASS BARB FITTING INSTALLED INTO THE END OF THE BLACK LP HOSE WHICH THEN CONNECTS TO THE QD
  • ADJUST THE OTHER WRENCH TO FIT THE BODY OF THE QD, KEEP WRENCH CLOSE TO THE BRASS BARB FITTING SIDE OF THE QD
  • KEEP STEADY PRESSURE ON THE BRASS BARB FITTING WRENCH, DO NOT ALLOW IT TO ROTATE;
  • UNTHREAD THE QUICK DISCONNECT FROM THE BRASS BARB FITTING
  • REMOVE ADJUSTABLE WRENCHES AND SET ASIDE FOR USE AGAIN
  • USE THE WIRE BRUSH TO CLEAN ANY REMAINING SEALANT OR DEBRIS FROM THE BRASS BARB FITTING THREADS
  • CLEAN OFF WITH A RAG, ENSURING NOT TO GET ANY DEBRIS INSIDE OF THE BRASS BARB FITTING

 

STEP 4: Perform a bubble solution test with soapy water

  • Pressurize the entire system to 10 to 14in water column.
  • Spray changed LP quick disconnect with soapy water or leak detector bubble solution.
  • Monitor for bubbles. If bubbles found retighten or repeat step 2b and retest (Step 4)

 


Chronology :

4/6/22 was notified by Thor Corp of Forest Rivers findings of faulty disconnects.

4/7 to 4/20 FRC and Warranty claims investigation and analysis.

4/19 Received shipment and PO information from Flex Tech.

4/20/22 – found 5 warranty claims with zero personal injury and zero property damage.

4/20 received letter from Flex-Tech stating LP disconnect issue with Flex-Techs findings.

4/26 safety committee meeting voted for voluntary recall. Investigation called for to determine the affected unit scope and range.

 


22E034 – Cracked LP Gas Quick Disconnect Fitting – Mr. Heater 1/4 Quick Connector Set

 

22E034 – Cracked LP Gas Quick Disconnect Fitting – Mr. Heater 1/4 Quick Connector Set

 


1 Affected Product

Vehicle

MAKE MODEL YEAR
HEARTLAND FUEL 2022

 


8 Associated Documents

Recall 573 Report – 5/5/2022

RCLRPT-22V294-2875.PDF 215.507KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [210.46 KB]

 


Recall Acknowledgement

RCAK-22V294-5418.pdf 652.158KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [636.87 KB]

 


Defect Notice 573 Report

RCLRPT-22V294-9314.PDF 215.444KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [210.39 KB]

 


Remedy Instructions and TSB

RCRIT-22V294-8479.pdf 140.845KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [137.54 KB]

 


Recall Quarterly Report #1, 2022-2

RCLQRT-22V294-1323.PDF 211.142KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.19 KB]

 


Recall Quarterly Report #2, 2022-3

RCLQRT-22V294-5668.PDF 211.246KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.29 KB]

 


Recall Quarterly Report #3, 2022-4

RCLQRT-22V294-2846.PDF 211.332KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.38 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-22V294-7039.pdf 163.058KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [159.24 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22V294&docType=RCL

 


 

“This site contains affiliate links for which OEMDTC may be compensated”
Bestseller No. 1
M MINGLE Garden Hose Quick Connect Fittings, 3/4 Inch GHT Solid Brass, Quick Connector Set, 2-Pack
  • Include 2 pair durable and leak-free water hose quick connector sets. Made of solid brass.
  • Standard 3/4 inch fitting. Quick connect garden hose end to faucet, sprayer nozzle or pressure washer pump. Fit any 3/4" GHT (garden hose thread) watering equipment. Not Fit 1/2" GHT, 7/16" GHT(garden hose thread) watering equipment.
  • High replacement water hose adapter provide secure and quick fittings, easy to connect and disconnect.
  • Working pressure is up to 200 PSI.
  • M MINGLE is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions.
SaleBestseller No. 2
HUOYANSHE Quick Disconnect Fitting and Quick Connect Hose Fittings for Gas Hose Connection, 3/4 Inches, Intended for Kitchen Equipment
  • Size – 3/4 Inches, suitable for commercial appliances.
  • Material - Made of brass, solid and durable, corrosion resistant to ensure long service time.
  • Function - Quickly disconnect and quick connect hose fittings close the valve. Prevent gas leakage before closing the valve, and allow the valve to open only when gas hose is securely connected.
  • Applications - Suitable for connecting gas appliances to enhance the safety of commercial kitchens and further increase productivity and efficiency.
  • Package - Quick disconnect and hose quick connect fitting*1.
Bestseller No. 3
DERNORD 1/2 Inch Stainless Steel Quick Disconnect Set - Beer Brewing Connector Kit (Barb Female/MPT Male)
  • INCLUDES: 1/2" barb female and one 1/2" MPT male
  • CONVENIENT: Easy connection to plate chillers and wort pumps.
  • EASY SANITATION: Easy to install and disassembled,quick disconnect allow for easy sanitizing during your brew day.
  • SAVE TIME: Quick disconnects make setup and clean up a breeze so you can get down to brewing!
  • HIGH QUALITY: Heavy duty stainless steel construction to look great and last a lifetime, and high temperature O-ring ensures a tight seal every time.
SaleBestseller No. 4
Hourleey Garden Hose Quick Connector, 3/4 Inch Male and Female Garden Hose Fitting Quick Connector, 6 Set
  • Package include: 6 female quick connectors and 6 male quick connectors, 6 extra garden hose rubber washers.
  • Widely use: Standard 3/4" aluminum garden hose thread, fit for all 3/4" standard garden hose.
  • Easy Connect: Easy to connect and disconnect, rubberized grips design makes quick connector more convenient for connect and disconnect
  • Material: Premium aluminum material makes it stronger and lighter, construction for prolonged service life.
  • Good Service: If any problem, please feel free to contact us, Prince Team offer replacement and full refund services.
Bestseller No. 5
IRONSTAR Quick-Disconnect Hose Barb Insert,Plastic Quick Connect Male/Female Coupling Connector,Apply to 1/4" Inner Diameter hose,2 Female Connectors and 2 Male Connectors
  • Body material is Polyoxymethylene, NOT suitable for high temperature environment
  • Suitable for direct 1/4 Inner diameter hose, suitable for water and air flow
  • There will be no leakage or air after it is disconnected
  • Connecting hoses that are too thick or too thin may lead to leakage. Only 1/4 Inner Diameter diameter hoses are applicable
  • The specific size of the product will be shown in the picture. Please see it clearly before purchase
Bestseller No. 6
McKillans® Pressure Washer Quick Connect Kit, M22-14mm to 3/8" Male Female Quick Disconnect Kit for Power Washer (Stainless Steel)
  • READ** Please verify you have an M22-14mm hose prior to purchasing. The male adapters have a plug with a diameter of 14mm, not 15mm. Therefore, it is not compatible with electric pressure washers from: Sun Joe, AR Blue, Simoniz and more. If your washer requires a 15mm fitting, using this fitting will cause leaks. Compatible with all gas powered pressure washers with M22 connectors
  • ✅ The Complete Solution: Every connector and adapter you need to convert all your connects on your pressure washer to full stainless quick connects, in one kit.
  • ✅ Smooth Operation: The corrosion resistant stainless steel helps ensure smooth operation of the connects.
  • ✅ Machined in Stainless Steel: Every connector is made out of 304 medical grade stainless steel, which does not rust or tarnish.
  • ✅ Upgraded O-Rings: Made from Viton, a temperature and chemical resistant rubber compound, and much more robust than traditional o-ring materials.
Bestseller No. 7
EVIL ENERGY 6AN Male to 3/8" SAE Quick-Disconnect Female Push-On EFI Fuel Rail Fitting
  • [Size] The thread size of 6an is 9/16-18UNF. The ID of spring lock is 3/8 inch.
  • [Seal] The 6an flare efi fitting is sealed at 37 degree angle to avoid leakage.
  • [Parameter] Working pressure: 1500psi, Temperature range: -40°F to 176°F.
  • [Material] Made of aluminum alloy 6061-T6.Spring lock is made of plastic.
  • [Application] Widely used in engine fuel rail, ls swap, transmission cooler, return line, fuel sensor, etc.
Bestseller No. 8
Beer Quick Disconnect Set Brewing Connector Kits, Stainless Steel 1/2 NPT Male Quick Disconnect 1/2” Female Quick Disconnect Fittings for Wort Pumps & Chiller with Sealing O-Ring
  • Premium Stainless Steel Reliability: Experience enduring performance with our meticulously crafted FPT quick disconnect, made from top-grade 304 stainless steel. The internal food-grade silicone o-ring enhances safety, providing anti-corrosion, heat resistance, and wear resistance for a durable brewing accessory.
  • Effortless Equipment Connectivity: Seamlessly connect to plate chillers and wort pumps with our quick connect fittings featuring a 1/2 NPT thread. Effortlessly link to various fittings like ball valves, wort chillers, and beer pumps, ensuring smooth transitions between different brewing equipment for an efficient setup.
  • Dependable Leak-Proof Homebrewing: Ensure a secure brewing experience with our barbed quick disconnect's reliable leak-proof design. The red silicone gasket guarantees a tight seal for both liquid and gas. The included set of two 1/2" barb female and two 1/2" FPT male components allows for easy one-handed operation, making it the optimal choice for a seamless homebrew quick disconnect setup.
  • Time-Efficient Brewing Operations: Speed up your brewing process effortlessly using our beer brewing connector. The user-friendly design and efficient push-on hose installation simplify both setup and cleanup, allowing you to focus on the brewing process. The heavy-duty stainless steel construction ensures a stylish appearance and long-lasting performance.
  • User-Friendly Design for Easy Brewing: Simplify your brew day with our quick disconnects, offering easy installation and disassembly. This design eliminates cumbersome hose connection operations, providing a hassle-free brewing experience and enhancing overall convenience.
Bestseller No. 9
Twinkle Star 3/4 Inch Garden Hose Fitting Quick Connector Male and Female Set, 4 Set
  • Exclusive Package: Includes 4 female and 4 male quick connectors, crafted from premium aluminum for unmatched durability and prolonged service life. Quick-connect hose fittings ensure long-lasting performance.
  • Universally Compatible: Standard 3/4" aluminum garden hose quick connectors fit seamlessly with all garden hoses, watering devices, jets, sprinklers, and nozzles, providing versatile connectivity.
  • Effortless Connection: Designed for ease of use and reliability, featuring rubberized grips for effortless on/off operation of the hose. Enjoy the convenience of these garden hose adapters.
  • Precision Manufacturing: Crafted with precision processes to ensure leak-free and durable performance. These connectors are easy to connect and disconnect, providing hassle-free operation.
Bestseller No. 10
HQMPC Garden Hose Quick Connect Solid Brass Quick Connector Garden Hose Fitting Water Hose Connectors Garden Hose Disconnect 3/4 inch GHT (2Sets) (2Female+2Male)
  • ★【Standard 3/4 Inch GHT Garden Hose Quick Connect】- You will get 2 brass female couplers +2 brass male nipples+4 free washers.You can enjoy it work perfectly with any standard garden hose,faucets,hose bibs and watering devices.
  • ★【Durable And Solid Brass Construction Water Hoses Connector】-The most solid brass which means durability & leak-free. No cheap and flimsy aluminum or plastic material.Standard 3/4 inch GHT water hose quick connector fits all types of garden hoses. You can save much time using the quick connet sets install in spigot, hose end and nozzle.
  • ★【Quick Connect Garden Hose Fittings Can Stand Up to 200 PSI】-Stand up to 200 PSI,gives the Easy Connect Fitting continuous water flow and it’s a great tool to complete your garden accessories and water hose connect.Easy to connect and disconnect.
  • ★【Quick & Easy Connector】- 1-Handed Operation.Convenient to install with garden hose connector.Easy Off-And-On adapter provides a tight, secure Fit, no-Leak connection.Just need several seconds to install it on your water hose end.
  • ★【Water Hose Quick Connect with 3 Years Warranty】The best brass garden quick connectors for your garden hose.You can reply on our service of 3 years gurantee. Just order HQMPC brass garden hose quick connectors with your prime. If you have any slightest problem with these products,we will 100% refund to you or replace a new set for you

Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...